Having problems with your Electrolux 18 in. ESL4114 Slim-Line Built-in Dishwasher ?

Electrolux Dishlex DX302WB No display. Seems to be no power. Plug is plugged into the power and power point is switched on. Any clues?


Answers :

If there is NO display then this is fairly major. Please check, the main Fuse or Circuit breaker. If they are OK, then you have some sort of internal disconnection, usually caused by a faulty. "Brain" or Main Board.\015\012
\015\012Please find below your service and repair manual, this should help you troubleshoot and hopefully effect a repair.\015\012
\015\012http://frigidaireservicetips.com/pdfs/467_10.pdf\015\012
\015\012Below is a self help how to repair your dishwasher between this and the manual, you should have a good shot at repair.\015\012
\015\012Else call a reputable serviceman and ask for a 'Quote" before proceeding with any repair.\015\012
\015\012http://www.acmehowto.com/howto/appliance/dishwasher/dishwasher.php\015\012
Repair Help & Product Troubleshooting for Electrolux 18 in. ESL4114 Slim-Line Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Electrolux Dishlex DX302WB No display. Seems to be no power. Plug is plugged into the power and power point is switched on. Any clues?


If there is NO display then this is fairly major. Please check, the main Fuse or Circuit breaker. If they are OK, then you have some sort of internal disconnection, usually caused by a faulty. "Brain" or Main Board.\015\012\015\012Please find b ... Electrolux 18 in. ESL4114 Slim-Line Built-in Dishwasher

My dishwasher tripps out when it is plugged in, how can it be resolved? ----- when i plug the dishwasher into the socket, it cuts the power supply to some electrical points around the house. It trips out a switch in the electrical terminal box, what can i do about this?


There is a shorted component in the dishwasher that must be found and repaired. Requires hands on troubleshooting.Eric ... Dishwashers

My power button cover broke on the dishwasher and I figured out the part number I needed, but when I put it back together I got the wires crossed on the board and door switch. Now the control lights up , but the dishwasher will not run a cycle. THe question is does the plug on the door switch have to be a certain way, because there are three wires and you can connect the plug both ways. I did turn the plug, but it still does not run. Did I break the switch? Bosch SHU9956uc/14


The wires do have to be a certain way on the door. Otherwise a door open can tell the board that's it shut and vice versa. The easiest way to do it, is test the switch with an ohmmeter, place the meter on the switch, push button in and see if the rea ... Bosch SHU9956 Built-in Dishwasher

Ariston LSI 41 dish washer had intermitant problem of green light not coming on when main power switch turned on and machine not working, the circuit had beed repair before. I played around and got the machine to go through a full circle once then would not go again. So I have put a new circuit board with switch etc. still the switch panel light dose not come on, i found bad connection in connector which comes from small plug on circuit board, (two red wires )I have checked for power to board. W


... Ariston Technologies Dishwashers

Dishlex global 460 fault.. Always stays on and makes a pumping sound while 'of' is displayed. Only way to turn it off is at the power point. Have tried turning it off at the power point for some time and re setting by pushing start & program at same time with no luck. According to the manual the code says "incorrect fill levet or time " and contact service for help. Any ideas?


... Dishwashers

No power switched on this morning working ok came back from dog walk ; no power at all ,plug socket ok changed fuse in plug


... Baumatic 18 in. BFD47 Free-standing Dishwasher

I have a AEG OKO_ FAVORIT 4040 dishwasher which has had very little use despite its age. The problem is that the switch that detects an over-fill is activated all the time and the pump continues to try and empty an already empty dishwasher even when the main switch is turned off, the only way to stop this is to turn it off at the power point I have had some sucess deactivating this switch by tilting the dishwasher forwards however because of the angle it sometimes overflows when filling. The ma


Hi there,This could be a problem on the control board of the unit. It could be faulty and need replacement or you may try to access the board and try to clean it.Make sure upon doing this all electrical connection to the unit ... Dishwashers

No power. I have check the circuit breaker it is ok. check the plug and power is going to the dishwasher. I press the on- off switch and there is no power.


Did you look in your owner manual and see if there is an internal fuse? And some units requires that the door lock be engaged before the unit will power up. ... Dishwashers

Kitchenaid model KUDIO1ILBL6 The lights for Heavy Cycle ,Normal Cycle and Cancel blinking at the sametime constantly. The tech sheet is missing and the unit is appox. 5years old.have shut power down for 5 minutes .When power turn back on only the Heavy Cycle light blinks costantly. Have Ohmed out the door switches and check adjustment OK. Checked board strips and plugs for good clean and tight connections OK. Thanks


Hi, You need to reset the unit by pushing the buttons. Push the heated wash/heated dry a few times. All the lights will light up and the dishwasher will continue its . Let ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

No water flow to dishwasher disconect the plug at flowing switch 120V no power at water valve plug


Check to ensure you have proper volatage at the connection box behind the toe kick\015\012 the you will need to open the door to check the door switch for both voltage and continuity ... GE 24 in. Profile PDW7800 Built-in Dishwasher

Bosch shu8806 Hello, I aquired a shu8806 recently and it doesn't work. It has power and water. I push wash cycle, indicator light comes on, shut door and nothing happens.  So the door switch seemed like a good place to start. Since I am an electrician I thought I would give it a shot. When plugged in, the wire from the motor is 120V but when jumpered to the neutral(common on the door switch), motor doesn't operate. Although, I have heard the motor turn over momentarialy when trying to run unit e


The pump may be clogged, or the motor start capacitor may be bad or some units have a fill switch wired inline with the motor so it won't start unless the unit is full ... Bosch 23 in. SHU 8805 Built-in Dishwasher

No power on the main switch inside the door, checked the fuse in the plug changed with new and no success, we had 2 poss 3 power cuts yesterday but the dishwasher was not working at the time? christmas time help. not sure on the actual type as it was in the integrated kitchen when we moved in 2 years ago an no manuals.


Make sure there is power coming from the house panel by checking the breaker for the dishwasher. ... AEG 23 in. Favorit 50750Vi Built-in Dishwasher

No water flowing to dishwasher, I check the power to flow switch plug 120v no power to water valve


Check to make sure both sides of your door switch is closed as well\015\012 if your door switch is not closing properly it will not send voltage to the water vale ... GE 24 in. Profile PDW7800 Built-in Dishwasher

Whirlpool ADP5550 causes electrical points to trip safety switch. have confirmed it is definately located to the dishwasher being turned on - at the dishwasher not the power point. Will I need a whirlpool technician (& how to find one locally) or electrician? TE


... Whirlpool Dishwashers

No power, doesn't do anything when plugged into a working power point


Most likely the controller has lost power. This can happen if either the thermal fuse located in the heater assembly is blown or the filter board located at the base under the drawer is faulty.\015\012\015\012Unfortunately with a single d ... Fisher and Paykel 24 in. DS-603 Built-in Dishwasher

Seems like the washer is not getting power. The cord has a big plug with two buttons with little lights. Lights do not go on. I think they did at on point. Is the plug toast or is there some trick or could it be another issue?


The lights are gcfi circuit interupter indicators you should be able to push them in to reset them if they dont check where you are plugging them in to see if that is causing the problem. ... McCulloch FH160G Pressure Washer

No Power Hi Timon90, I used the dishwasher like normal yesterday today I went to use it and there is no power at all. I have checked our electricity box and none of the switches are tripped. I have put the door in as hard as I can and have checked whether the electricity plug has been pulled out by accident. Can you suggest anything or should I call a serviceman. Thanks from Julie


Remove the door skin dont forget the two screws under the door in the middle,the control panel will lift off remove the power board(unclicks)remove the plastic case and see if its blown.But first also remove the lower kick plate at the front and chec ... Asko 24 in. D3350 Dishwasher

Cannot figure out how to remove the oil plug to drain the oil. Label points to a spot that looks like it might be a plug, but can't figure out how to remove it. It is a 2500 psi Mdl VR2500 Briggs & Stratton engine Honda Power Washer. Ken from NH


Should take a 3/8" socket extention ... Pressure Washers

Hi, I have a Dishlex Global 300 which has just stopped powering. The power supply is fine ( I plugged in other appliances and they work) but the machine is just dead, no lights, no sounds, nothing. The door closes OK. There have been no leaks, burning smells or any other problems with it. What to do? Please help! Thank you in anticipation.


Hello it,ll will be the on/off switch easy to replace and costs about 10-15 bucks youll probally see a char mark on the connector, where it over heated and shorted out. ... Electrolux Dishwashers

Belling IDW604 dishwasher. Accidentally openned mid cycle, could not reset or switch off. Then had power cut. Dish washer now off and cannot be switched on or activaled at all. Have changed the plug fuse but still will not work.


The one link for all the solutions just click the link and solve any type of problem in kitchen ranges.\015\012www.applianceaid.com\015\012\015\012 the link ... Belling Dishwashers

Trips power when it is turned on at the on/off switch. There is a little bit of water on the baseplate so obviously a leak but i can't see it. Anyone know of common leak points on these machines ? Thanks Steve


Go to the Hotpoint website - there is a trouble shooting section. Failing that find the customer service number on the website and ask if there is anything you can do to solve the problem yourself before paying for a service call. I would alway opt ... Hotpoint 24 in. FDW60 Free-standing Dishwasher

Dishlex Global 310 trips the circuit breaker at any time during wash. Fitter an RCD to the power point .. but problem still happens . Any ideas ?


?? would have to see d/w to help with this problem .. could be a bad breaker / if its not the dw .. should call a service tec .. mm ... Dishwashers

Will not empty washer and has stopped at the point of pumping out water When switched on power light continuelly flashes an washer light is on first indicator nothing happens


\015\012Q - My dishwasher wont drain, what can I check for ?\015\012A - Please see the dishwasher pages dishwasher pages for more detailed information. ... Dishwashers

The machine is a fisher & paykel nautilus, its making a beeping noise the only way to stop it is to switch it off at the power point and in the little screen it has F1 not sure what that means


You may have to check the micro switch for the door if it is working properly. Check if the wiring has been removed or if yours is the mechanical type, check if the lever needs aligning or straitening. ... Fisher and Paykel Dishwashers

No power light when switched on - fuse and plug ok


... Miele 24 in. G693 Free-Standing Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1009 seconds