Having problems with your Electrolux Dishwashers ?

Model # LS6AH / WT30H Display shows: C 2 will not drain or perforn any function


Answers :

Repair Help & Product Troubleshooting for Electrolux Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Model # LS6AH / WT30H Display shows: C 2 will not drain or perforn any function


... Electrolux Dishwashers

I have a Kenmore Ultrawash...model 16761 which doesn't drain. the owners manuel mentions an air gap accessory but does not show its location if clogged. I wonder if the switch is bad or the drain pump is defective. I have checked the drain line and its clear. Any suggestions? Please advise.


Hello there:here is a couple of small diagrams for you to look at i will be sending more ok ... Dishwashers

When I press the start button, Bosch dishwasher (model SHY56A 05UC) just keep running the motor pumping the water out of dishwasher, irrespective of: 1) the wash cycle it is on, 2) whether the door is closed or open, 3) whether I cancel drain cycle, as told by Bosch Cust Svc in following steps: - "Cancel Drain" by pressing 'Quick Wash' and 'Regular Wash' buttons together for a minute until it shows 0* - Shut power off for a minute and wait for a minute - Restart on Quick Cycle. Paid


What is happenig i believe and has happened to me 2 times is that the water level float that is on the left side of dishwasher is stuck.\015\012\015\012Either remove side panel and flick lever or pull dishwasher out and tap lower portion ... Bosch SHY56A02 / SHY56A06 Built-in Dishwasher

The rinse aid dispenser in my frigidaire dishwasher model fmp330rgs0 seems clogged. When I pour in the liquid it won't drain into the chamber and the 'window' that shows if rinse aid is in the chamber does not show that any rinse aid is going in. Is there a way for me to fix this myself?


... Dishwashers

Bosch SHU992SUC Dishwasher does not drain. It's not clogged in the external hose, the filters are not dirty. I moved the Dishwasher outside and ran it with the input attached to the garden hose and the output drain hose laying on the ground so there is absolutely no chance of restriction due to the way it's plumbed in. This model does not even show up on Bosch web site. I guess I have to start taking apart the machine blind with no service manual. Ideas? It's less than 10 years old I think. M


PUT THE MACHINE IN DRAIN MODE IF YOU DONT HEAR A HUMMING NOISE THEN THE DRAIN PUMP IS BAD. CHANGE YOUR DRAIN PUMP. ... Bosch SHU9925UC Built-in Dishwasher

I have a LG Dishwasher Model LDS5811ST. The code LE is showing and my water will not drain. The motor seems to be straining? What can I do?


( Motor error ) Condition : The motor is working abnormally. \015\012Possible cause : Wiring connections. The impeller of washing pump is \015\012locked. The rotor of washing motor is locked. The blade is locked.\015\012 Correct wiri ... LG Dishwashers

Dishwasher takes in water and then pumps it out to drain, showing that the cycle is finished, the re-circ pump does not come on at all, any ideas with this problem. The Model is a Tricity Bendix TDF200


This is a control fault. you will need to replace the timer or control board. this will fix your issue. ... Electrolux Dishwashers

I have a miele washer unit model G7881. it has failed towards the end of the cycle showing F22 and still has water in the bottom... Might this be a failed drain pump?


Failed or blocked most likely blocked ... Dishwashers

Ge model # gsd4020z05bb will not drain after wash cycle is completed solenoid valve appears to be functioning correctly


... GE Dishwashers

The electronic controls seem to be combining in odd ways and show three or four different functions at a time. Also the draining only occurs for a couple of seconds. I finally had to physically empty the water.


Press the RESET button and wait for 5 mins. If no go, you need a new control panel circuit board ... GE 24 in. GSD4320Z Built-in Dishwasher

All the functions seem to work properly, gets hot, drains, gets water, settings are all ok, but the dishes and glasses do not come clean. Nothing is different including the type of soap we use, from when we bought the mache 2-years ago. Kenmore model 66513732K601, 575-0 type.


HiPlease check if something is blocked near the top spray arm, also make sure that all holes are open. Use a sharp metal pin to clean the holes on the top spray arm. Make sure the water pressure is not low under t ... Kenmore Dishwashers

Our GE Dishwasher gsd4425 model has an error code of C3 - drain sensor not functioning. We have hit reset several times and this error code just keeps blinking. I believe the dishwasher was purchased in 1997. Tips on fixing?


... GE Dishwashers

My Bosh Diswasher model SHE44C02UC gets stuck on rinse at the end of any cycle with 1 min showing on the timer and wont clear? The water does not drain. I need Help


Module or drain pump need ed call 1-888-nyc-1055 they are pretty good with any bosch appliances. ... Bosch 24 in. SGS47E02 Exxcel Free-standing Dishwasher

Whirlpool dishwasher model:DU800 CWDQ5 has very little and slow drain all other functions work great


Check the drain hose for kinks. If not kinked you will have to find the blockage. Look in areas where the hose has smaller diameter first.Eric ... Whirlpool 24 in. DU800CWD Built-in Dishwasher

Dishwasher (Whirlpool Model DU930PWQ0) won't pump out. Problem occurred after door was opened during a cycle. Then the pump-out function ceased to work. Washer fills and pumps correctly during the wash cycle. Any suggestions? My guess is that the electronic control may be faulty and it is not opening the solenoid valve for the drain cycle. The other option I have thought of is that the solenoid valve may be faulty and is not responding to the signal from the controller. The dishwasher is n


... Whirlpool DU930 Built-in Dishwasher

I have a Whirlpool Model DU943PWKQ0 dishwasher. Several of the controls on the front panel no longer work, ie normal wash, cnacel and drain, etc. Others like heavy duty wash work perfectly. It appears the most used are what is not functioning. My question is should I replace the Microcomputer assembly part number 8530929 or the Console (with overlay) part number 8274732. Can you help as I cannot really afford both!


... Dishwashers

I have a Whirlpool Gold Quit Partner III, model GU1100XTLB1. When I run the normal cycle it functions well until near the end. At that time the unit stops and the pots&pans indicator light blinks. If I hold the cancel button in the unit drains then refills and the light starts to link again. I don't know how to reset this unit because I only have air dry. If I leave the power off for a day I can get the unit to reset. If not, it just fills back up with water and the pots&pans starts blinking aga


... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

SMU50e32SK dishwasher showing E06 in display after a few seconds. Dishwasher has one Main Power PCB and one control unit PCB in the front. Info: Main PSU PCB has been shifted due to overvoltage. All sensor checked, seems to be ok after this has been shifted. I don't think the induction motor(big pump) has been affected due to the relays in front. Could it be the Control PCB in the front or maybe the small drain PUMP. Well some of you properly now what E06 is referring to on this model.


... Bosch 24 in. SMU40 Built-in Dishwasher

We have a Kenmore Ultra Wash Dishwasher Model number 665-13859K601. The Normal wash and the Cancel (drain) buttons are flashing red on the control panel. No matter what we have tried, we have been unable to correct this problem. Obviously the dishwasher does not function. When you close the door the lights keep flashing and no button combinations seem to do anything. I have looked at the troubleshooting guide that came with the dishwasher, however there is no


... Dishwashers

SMU50e32SK dishwasher showing E06 in display after a few seconds. Dishwasher has one Main Power PCB and one control unit PCB in the front. Info: Main PSU PCB has been shifted due to overvoltage. All sensor checked, seems to be ok after this has been shifted. I don't think the induction motor(big pump) has been affected due to the relays in front. Could it be the Control PCB in the front or maybe the small drain PUMP. Well some of you properly now what E06 is referring to on this model.


... Bosch Dishwashers

My electrolux dish washer model eidw6105gso stopped before it completed the cycle. All the selection lights were flashing and i could not get any functions to change. I killed the power at the breaker to try to reset and that didn't work either. I removed the panel on the front on the bottom to see if there was a reset button and found another display that is showing a light on the turbidity location. what is this and what might i do to get my washer back working?


... Electrolux Dishwashers

For my Kudi01dl model dishwasher, the rinse light is on, but the unit will not respond to any buttons being pressed and won't turn on. When I press any buttons, two horizontal lines show in the front, but go off as soon as I let go of the button. Is there a ways to reset the unit? Everything was functioning fine the last time I used it. I use it about once a day. The problem started when I heard sounds coming from the unit, very loud motor sounds. The door was closed but I had not turned


... KitchenAid 24 in. KUDI01DL - Multiple Color Built-in Dishwasher

Lg dishwasher model LD-2163SH problem code IE meaning water is not supplied. I have checked that the valve is open and water line has sufficient pressure. Inlet hose is also not kinked and pump for drain is functioning normal. Pl suggest solution urgently? manoj


... LG LDF6920ST Stainless Steel 24 in. Built-in Dishwasher

What is the cancel drain button function on kenmore elite dishwasher model


... Kenmore Elite Stainless Steel 24" BuiltIn Dishwasher with TurboZone Rotating Spray Jets 13103

My Professional series model fdbb4365fc2 Makes a slight intermittant thumping sound a few times when its started and than after a few moments it shows the error code uo. For a while we could cancel and try a different cycle and it would work. I checked drain hoses and sink trap all looks o.k. What is my options


... Frigidaire Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1521 seconds