Having problems with your Electrolux Dishwashers ?

How do I change the door seal of my dishlex global 500 model DX500IKA*o5 I have the part. I also need to change the main door seal which I have and the light.many thanks


Answers :

Repair Help & Product Troubleshooting for Electrolux Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

How do I change the door seal of my dishlex global 500 model DX500IKA*o5 I have the part. I also need to change the main door seal which I have and the light.many thanks


... Electrolux Dishwashers

I have white crusties with black spots in all along the seal on inside of door, and along filter on top left side of door (inside). and also i use jet dry and my glasses and dishes are coming out cloudy looking. also i have to fill the rinse agent every wash instead of monthly. Is there any special cleaning that needs to be done to this?


Problem is your water. that is from the calcium in the water. go to www.dishwasherfilter.com and get the filter system . it will make your dishes sparkle and help clean out ... Whirlpool GU2400XTP Built-in Dishwasher

Our SB915WJ doesn't heat water though the heating element is ok, I checked with my multimeter. Is there a mains relay or something i need to change in the circuitry to fix this problem? Does anyone out there have a service manual you can email me? Also the fan drier isn't working, also the relay that is supposed to flip open the soap dispenser doesn't work. The unit is only eighteen months old. I'm not impressed with it's working life.


THERE IS A HIGH TEMPERATURE CUT OFF SWITCH WHICH LOOKS LIKE THE BAK OF A STAINLESS STEEL WATCH IT HAS TWO LUGS THAT THE HEATER ELEMENT IS ATTACHED TO. IF YOU TEST IT YOU WILL FIND THAT IS IS OPEN CERCUIT. I'M NOT SURE WHERE IT IS ON THAT MODEL BUT ... Westinghouse Dishwashers

Changing pump oil on ryobi pressure washer model ry80030 guy oil leaking out of breather on pump do I also need to change seals and if so how do I do this


... Karcher 2500 PSI Pressure Washer

Westinghouse SB915WJ is leaking cold water underneath machine. Working fine, just leaking water. Have changed door seal but it is still leaking. Also tried leveling it but this has not helped. Would like to access underneath and see if clamps are on tight but don't know how to access this part of machine.


... Westinghouse Dishwashers

My Frigidaire is leaking at the pump and motor connection. It is 10 yrs old and I want to know if it is worth it to repair it or do I need to replace it. The bottom door seal also came off and it has a small leak there as well.


Hi,\012I would replace it...\012Here is a tip that I wrote about dishwashers and them leaking.Leaking Dishwasherheatman101 ... Frigidaire 24 in. FDB435RFR Built-in Dishwasher

Model 587784100 My 18inch Kenmore apartment-sized portable dishwasher leaks when running and needs a new main rubber gasket (where the door seals the washer), and a new collar of some sort of white hard plastic collar at the very bottom of the spinning washer arm (which I believe helps make it spin more freely and not "chatter"?) My question is: Is it possible foe a handy person to replace these parts (looks fairly easy), or should I get a proper Kenmore/Sears repairman to fix it?


If you think you can do it then do it. it is normally not any harder than it looks. now because i work there i would say call them :) but you can change those parts fairly easily ... Kenmore Dishwashers

I have a Maytag MDB4800AWB and it leaks at bottom left side between the two panels, is there a seal I can replace,and if so, how do I do it? Also according to the warranty Maytag covers leaks of door


... Maytag Dishwashers

My dishwasher is leaking from front bottom left side when on. have checked the door seal and it is worn about 3" up on left. there is also a rubber seal on the door itself running along the bottom. can this also be replaced and if so where can i get one?


Hi,\015\012Yes, they can both be replaced...this tip will also tell you how to purchase them...\015\012\015\012Here is a tip that I wrote about dishwashers and them leaking. ... Indesit 24 in. IDL500 Built-In Dishwasher

How to change the bottom door seal on a Westinghouse SB907


... Zanussi 21 in. DCE5655 Free-standing Dishwasher

I have a Dishlex Global 450 dishwasher and have a faulty seal to replace. The original door seal had a foot on each side and the replacement I received has 45 degree cuts and no foot. Also the bottom seal replacement appears to be a screw-in type where the original was slipped behind a fold in the door. I have been assured by the supplier that I have received the correct replacement parts. Could you confirm the these parts are in fact correct and if they are which way should the seal lip an


Hello Tony. I am as concerned as you are that this is not the correct replacement part. The key to getting the right part is the model number which is on your machine, if you know where to look. Do this, go to this link to properly locate your mod ... Dishwashers

I've got a hoover HED6612-80 dishwasher think I need new door seal as the black rubber around the door comes off every time I try to close door. If that's right do I need glue? Thanks Gillian


... Hoover Dishwashers

Door seals for dishwasher lds5811bb it is leaking water and all I want is a diagram of parts so that I can order the right ones. I need the tub seal and the door seal.


Hi,\012That is not that hard to fix and you can easily buy the parts yourselfonline...Here is a tip that will help you with the online buying...How to Buy ... LG 24 in. LDS 5811 Built-in Dishwasher

Need part# of door seal gasket for GE Nautilus GSD4100J00BB


Enter your model # at www.appliancehelponline.com this is the part # AP3798079 The part is in stock and all parts come with installation instructions. ... GE Nautilus 24" Built-in Dishwasher

I don't have a model number right now, but the front door on my Admiral dishwasher is leaking at the bottom. I have changed the gasket inside the door panel at the bottom but it still leaks. This is a rental property and the renters did a job on this dishwasher. I was wondering if they may have pulled another lower gasket off that I didn't know existed. Something like a windshield wiper. The seal I changed was a foam strip 3 x 22 approx. Thanks for your time, Joan


It may not be the door that is leaking if this is an older admiral or whirlpool dishwasher the lever that holds the soap door closed has a little rubber seal that after time will let water in during the wash cycle it the runs down the inside of the d ... Admiral Dishwashers

Frigidaire dishwasher won't end cycle - will run on and on for hours. Sometimes it cycles through, usually it just endlessly washes and rinses. I have to CANCEL the cycle, which causes the dishwasher to empty and run a few RINSE ONLY cycles (which are consistent, cycle time wise) to rinse the soap off of the dishes. Also, the door for the soap seems to stick - how long into the cycle before the soap door should open? Also, does opening the washer during it's cycle (to add more dishes) change or


I would say the resettable thermostat has failed. There is a thermostat which senses the water temperature, and when it fails, it causes the dishwasher to run constant. Replace the thermostat underneath the dishwasher and that should cure problem. P ... Frigidaire 24 in. FDBB540 Built-in Dishwasher

KitchenAid Dishwasher KUDP01FL: Called repairman to replace balance link kit. Then door extremely stiff to open & heard loud pop when one of the ropes came off the roller. Repairman came back & put rope back on & replaced door seal, then the door won't close & he claims need a new door latch. When he left, door again extremely stiff to open & heard same loud pop when one of the ropes came off the roller. Now he says he can't fix it and to call someone else. I now have three problems: (1) The doo


May have bent door hinges,, need to check all alignment of door, hinges and latches... ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

I have a Kenmore Model 665.15955792 dishwasher. Water is leaking out the bottom of the door. I changed the door seal and the defusers but it continued. I took off the front of the door and I see the water filling into the base of the machine. When the dishwasher starts the cleam cycle, water is pushed up into the small square holes in the bottom of the door and then splashes up over the lip of the door and out onto the floor. It has never done this before, just started recently. I have had the d


... Kenmore Dishwashers

Hi...I have a Westinghouse Freestyle 921 Dishwasher...9 years young...Model SB921SG...that has recently been leaking from the bottom right hand side front corner of the door when performing its usual heavy duty cycle...It appears that the main door seal has significantly perished and is causing the problem...Therefore I have purchased a new Door Gasket part no.0208400069 from a recommended spare parts agent in Brisbane and after several attempts to re-fit this gasket/seal to the door...I still h


... Dishwashers

I have a Bosch SGI4005 AU/12 dishwasher that needs a new door seal, is this a common seal, or is it a seal for this model only? can I use any other type of seal? regards Peter


... Bosch Dishwashers

Intergrated doors i need to change the furniture door on a neff s5443x1 and i dont know how to get the old door off


It is quite simple to remove the door panel .around the inside you will see some screws along the edge of the stainless steel panel .these are torx 20 bit size there are usually 2 or 4 that need undoing and are usually the 2 at the corner near the to ... Neff 24 in. S5443X2 Built-in Dishwasher

Door won't close completely on GE dishwasher model# GLD8312POOSS. Also, child lock doesn't work to keep door closed. I need to secure the door to run the wash cycle.


... Dishwashers

Hello, My husband bumped into our Bosch dishwasher door when it was open. It won't close now, one side is about an inch higher than the other. Also the inside of the door (not the hinge) looks bent. What can we do? Can a repairman fix the door or do we need to get a new one?


THE DOOR NEEDS TO BE RESET IN ITS POSITION.THAT A REPAIR MAN CAN DO BEST YOU GET THE AXPERT IN TO ASSIST YOU.\015\012\015\012GOODLUCK.\015\012\015\012MOHAMED ... Bosch Dishwashers

Start button flashes 2hr, but will not start the dishwasher, when touched. Also, lights on top of the door are not always functioning. I phoned Maytag and customer service had me turn off the circuit breaker for 5 minutes. This did not change the dishwasher. I think that the door latch is not snapping into position, when I open the door.


... Maytag 24 in. MDB7601A Free-Standing Dishwasher

Water is leaking from the door seal I need to


Before you remove the door, be certain the bottom seal is not folded forward so that it does not seal. I fixed mine by opening the door partway and running my finger along the bottom, pressing the seal back in. If you need the manual, it is here: ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1353 seconds