Having problems with your Electrolux Dishwashers ?

The Door leaks at the bottom seal, new seal is fitted, can the door be adjusted


Answers :

The seal at the bottom of the door is PASSIVE (not actually sealed). If you are leaking there, look for correct type and quantity of soap, and be sure the machine is LEVEL.
Repair Help & Product Troubleshooting for Electrolux Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The Door leaks at the bottom seal, new seal is fitted, can the door be adjusted


The seal at the bottom of the door is PASSIVE (not actually sealed). If you are leaking there, look for correct type and quantity of soap, and be sure the machine is LEVEL. ... Electrolux Dishwashers

Hi...I have a Westinghouse Freestyle 921 Dishwasher...9 years young...Model SB921SG...that has recently been leaking from the bottom right hand side front corner of the door when performing its usual heavy duty cycle...It appears that the main door seal has significantly perished and is causing the problem...Therefore I have purchased a new Door Gasket part no.0208400069 from a recommended spare parts agent in Brisbane and after several attempts to re-fit this gasket/seal to the door...I still h


... Dishwashers

We are having water leak from the bottom of our Roper Dishwasher door. THe model # is RUD5750DG3. I have taken the inside door frame off and found a small white rubber seal had dislodged inside. i placed it back in the only sopt it fits but water is still leaking. I have checked to make sure the water is not leaking from any where else on the dishasher. This occurs when the water inside is spraying and eventually fills up on the bottom. We no longer have our manual as the dishwasher cam


Try to fix the rubber seal which has come out by fixing it through super glue or apoxy seal which will stop the water spill and leakage.\015\012Please give more details of you dwasher ..... the Make and model so that i can send you the manual f ... Dishwashers

A built in whirlpool dishwasher is leaking around the door seal, right side to be more specific. cleaned the seal, and along the bottom and it still leaks. Is there an adjustment that can be made to tighten the door. I wouldnt think it would be the seal itself do to being less than 2 years old. Thankyou for this service.


Hi,There is no adjustment per say on this door or seal. If water spray directly on the door it can cause this, what I mean by that is if the spray arm, either the upper or lower is stuck and continually sprays in one place it can cause th ... Whirlpool Dishwashers

Door seal Hi i have just brought a new seal for the bottom of the door but it has a peice cut out of the seal about 8inches from the end is this correct the door does not seam to have any thing that would fit in this missing peice if it is correct which way would the shortest edge face


Generally the notched out section fits around latch hope this helps ... Dishwashers

Hi, I have a small leak at the bottom right hand corner of the door. If you push in on the door while it's running it stops and the noise level goes down. Is there an adjustment for the door or would it just be the seal, it's 4 yr. old. My wife say's that the grand kids have leaned on the door in the down position , we try to keep it up when they are around , that's why I am asking about a door adjustment. Thanks


No adjustment. Try cleanig door gasket. If still leaks hinge probably got bent from leaning on door. Or door got bent. Needs to be taken apart to find cause for problem. ... Bosch 24 in. SHE44C05UC Stainless Steel Built-in Dishwasher

I have a Bosch SGS43A22 Dishwasher approx 8 years old. When I start a cycle it fills, runs for about 15 minutes, then drops out about a litre of water from the bottom of the door, then completes the cycle without any more leaking. I have run the machine with the front panel off and can see that water bypasses the top of the seal and fills the well of the seal then pours out. It only happens the once. The seal is fitted correctly. Any solutions?


After 8 years service the seal may have perished, so you should feel for a crack by stretching the rubber where you noticed the leak. ... Bosch 24 in. SGS43C12 Classixx Free-Standing Dishwasher

Model # PLD2850RDC2 has a leak at the bottom of the door. i have replaced the gasket in the vent. Had to remove door cover and seal at bottom of door. Had difficulty replacing bottom seal. How do I replace seal correctly? It is still leaking. Could it be something else?


The side baffels are bad. look on each side on the bottom in the corners and that is were their at just pull them out and get new ones ... Dishwashers

Door leak I have a small leak between the bottom of the dishwasher door the lower service panel on the dishwashere. I did replace the seal on the inside bottom of the door along with the other parts that come with the door seal. Could there be a gasket leak around the detergent dispenser or the vent at the top of the inside of the door. I did not check the water lever as was mentioned in a previous question on water level, but the float does move up and down quite freely. Any suggestions as to w


I had my dishwasher leaking alot at the bottom of the doo,r and found out that the steam vent was very cloged with gunk. After taking the vent cover off on the inside of the door and cleaning, then putting the vent cover back on NO MORE leaking. Th ... KitchenAid 24 in. KUDS25 Built-in Dishwasher

The door leaks at the bottom of the left side.i replaced the seal with a new one and now it leaks worst what the heck???


Check your overflow float. it looks like a small cone or hat. it should move up and down freely. if it is stuck down, the machine will fill up too far. the gasket is designed to stop splashing water, not be underwater. good luck ... Kenmore 16602 / 16604 / 16609 Built-in Dishwasher

My zanussi fitted dishwasher is leaking water through the door. removed front panel to see what is going on and the water is spurting out of two gaps in the seal. the seal is brand new and manufactured with these gaps. is there too much water in the dishwasher - does it have float valve that could be at fault?


It has a pressure stut,that should tell it to stop filling the machine,it sounds like it has gone ... Zanussi 24 in. ZDT6041 Built-in Dishwasher

Indesit model DG5400wg dishwasher can I fit new bottom door seal without removing the door bernice. If not can you tell me how. I'm fairly nifty wuth a screwdriver.


If you have a 90 degree screw driver you may be able to fit it enough to remove the 5-6 screws holding it in. may take some time but can be done with the right tool. ... Indesit 24 in. D63 Free-standing Dishwasher

I have a Hotpoint Super Plus dishwasher 7820. It worked well for a long time. Towards the end of the cycle it leaks a lot of water from the underside of the door, so it seems. I have fitted a new door seal. No success. What may be the cause?


The door seal has to be in a proper position completely around the door (including the bottom area of the door). If not, it will leak. Also, there are two black corner baffles/seals (located in each front corner inside the tub area) that may also b ... Hotpoint Dishwashers

Model 587784100 My 18inch Kenmore apartment-sized portable dishwasher leaks when running and needs a new main rubber gasket (where the door seals the washer), and a new collar of some sort of white hard plastic collar at the very bottom of the spinning washer arm (which I believe helps make it spin more freely and not "chatter"?) My question is: Is it possible foe a handy person to replace these parts (looks fairly easy), or should I get a proper Kenmore/Sears repairman to fix it?


If you think you can do it then do it. it is normally not any harder than it looks. now because i work there i would say call them :) but you can change those parts fairly easily ... Kenmore Dishwashers

Hi, We have a Frigidaire dishwasher machine 1500 series with fully electronic control. It is a new unit, has been installed nearly 4 months ago. The other day, when I went to take the dishes out of it, I notice that the rubber gasket that seals the door had come off somehow. Along with it I saw, sitting on the bottom, two pieces that looked like part of the seal, but I didn't know where they came from. I put the rubber gasket back on, but now the pieces and now the dishwasher will leak when runn


... Frigidaire Dishwashers

My d820 hoover dishwasher bottom door seal is leaking i would like to repair it. I have a new seal.


You'll have to remove door to put new seal on...pretty straight forward. ... Hoover Dishwashers

How do I fit a new door gasket to a Hoover DT999 dishwasher (the short horizontal seal at the bottom of the door, not the longer one which wraps around the inside of the body of the machine)?


Well I just did this (ew!)basically it just pulls out of a slot downwards (when doors open) but there's not much space so I took out a few screws to free the door up a bit.So - sitting with the machine in front of you and door ... Hoover 24 in. DT999 Free-Standing Dishwasher

Frigidaire dishwashers FDB2810LDC0 bottom of door leaking where do I find a new seal?


Try an appliance parts and repair store the door seal is not hard to replace just phone a couple of places and give them make model and year of machine they should be able to help you ... Frigidaire 24 in. FDB126RB Built-in Dishwasher

Why is water leaking from the bottom of the door? Do I need a new seal?


Hi,\012Yes...\012Here is a tip that I wrote about dishwashers and them leaking.Leaking Dishwasherheatman101 ... Amana 24 in. ADU5000D Built-in Dishwasher

Door still leaks after replacing bottom seal


The bottom seal isn't actually a seal, rather it serves as a splashguard. I had the same problem with the same model and started by replacing what I thought was a seal located at the bottom of the door.\015\012Check if the screws on the top ha ... KitchenAid KUDC25CH Dishwasher

Bosch Dishwasher door leaking at bottom, brand new.


Um rough to diagnose without seeing it but there should be a rubber gasket along the bottom of the door. And does the door panel hit the side of the tub when u shut the door? It shouldnt ... Bosch 24 in. SHU43 Built-in Dishwasher

Hi. I have an LG LDF7810 dishwasher. I did a deep clean and ended up taking out a bunch of grease from the seal between the door-bottom and the tub. I even removed the door to get at the grease I thought was trapped back there. Since then it has been leaking water, sometimes a drip and a couple of times a few ounces have gushed out at the end of a fill cycle. Did I remove some factory grease designed to seal the door bottom? If so, what should I replace it with? If not, what else could the


It is possible that while you removed off the grease the water seal/oil seal was also damaged. Once the seal is taken out it can loose the sealing strength which can make it possible to leak.\015\012Hence it will be good to remove the seal and ... LG 24 in. LDF7810 Built-in Dishwasher

Smeg dishwasher leaking through the door ive removed the lower door seal but dont know how it should go on happened all of a sudden and there was a desert spoon in the bottom of the dishwasher . im hoping it leaked because it dislodged the seal the seal came out easily from the outside of the dishwaser. can any one tell me how to replace it and which way it is supposed to sit model number sa425 smeg


... Dishwashers

I have a Whirlpool DU9000XR-9 dishwasher that was leaking. No leaks were coming from the bottom of the tub or any connections, etc. I replaced the door seal where it closes on the tub. There is still a leak on the bottom of the door. Can you point me to a possible issue(s).


... Whirlpool Dishwashers

Maytag Dishwasher Quiet Series 300 Door Leak: Model No. MDB8600AWG: The door leaks both from just beneath the touch pad at the top of the door, leaving a streak down the center face of the door (minor annoyance) as well as from the bottom left and right corners, more of a concern. I have cleaned both door gaskets and tried to reseat the inside door panel, to no avail. There appears to be a way to adjust the door travel (the door sags almost completely to the floor when opened), but I have yet to


... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1363 seconds