Having problems with your Electrolux Dishwashers ?

ELECTROLUX WT60E fault code C8 - Electrolux Dishwashers


Answers :

Repair Help & Product Troubleshooting for Electrolux Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

ELECTROLUX WT60E fault code C8 - Electrolux Dishwashers


... Electrolux Dishwashers

Electrolux dishwasher shows code 10 not filling fault and code 20 not draining fault but when running you are able to hear it filling and draining. Whats the problem.?


I had the same issue (Electrolux ESF 6251). I had both error codes 10 and 30. I found that the short hose connecting the inlet valve (solenoid) to the tank was cracked. That explained error code 30, but even after replacing the hose I still got error ... Electrolux Dishwashers

I have an electrolux dishwasher dx302wj*03 model. The fault code 50 is showing. Does this mean the control panel is faulty or the pump needs replaced? We have been able to fix other problems our selfs from the past and we have avery good store to get all the electrolux parts.


... Dishwashers

My Electrolux 66010 dishwasher stops mid cycle with fault code 60. What does this mean? This code is not listed in the manual. Thanks.


... Electrolux Dishwashers

Electrolux dishwasher my dishwasher frequently shows fault code 20, what does that represent? Is it economical to fix?


... Electrolux Dishwashers

Electrolux Dishwasher DX403SJ - 30 Overfill fault but unit is dry. Overflow sensor intact and all looks good. Think we need a reset code. Can anyone help?


... Dishwashers

Electrolux ESL 6251 dishwasher, fault code '30 with continuous warning tones.Is there any advice on what can be done other than calling Customer care as per manual.


... Electrolux 23 in. ESL624 Built-in Dishwasher

A1 fault code - Electrolux 24 in. ESI6220X Free-standing Dishwasher


... Electrolux 24 in. ESI6220X Free-standing Dishwasher

Fault code CD for electrolux ex600 dishwasher


... Electrolux Dishwashers

Electrolux ESL 6251 dishwasher, fault code '30 with continuous warning tones.Is there any advice on what can be done other than calling Customer care as per manual.


... Electrolux 23 in. ESL624 Built-in Dishwasher

Electrolux wt55 Fault code A1 - Dishwashers


... Dishwashers

My Kleenmaid dishwasher stops working after couple of minutes and shows fault code D05. The fault explanationd in the dishwasher manual is "D05 fault - motor under load". Any ideas... Thanks Palma


This means the motor is overheating.Remove the unit and be sure there arent dust bunnies collecting around the motor.Clean really well - and re-try.If the error persists - your only option is replacing the motor.Thanks! ... Dishwashers

E1 fault code Dishwasher runs for about 5 minutes. Water fills up at bottom of unit and then machine seems to pause then fault code E1 appears then water is pumped out from bottom of machine. There are no leaking pipes and drain is installed correctly. I installed a new wash pump and fault still appears.


Hi,\015\012I think both the heater and thermostat / trip switches need to be checked.\015\012If water is going in and out ok, then it seems to be waiting to heat the water. It sees a fault - so just clears out.\015\012Heating elemen ... Dishwashers

Electrolux 1113312-20 Hi - my dishwasher circuit board has burnt out (melted) and i need to replace this section. The details on the unit state:- Computime CODE: ELE4157 Electrolux CODE: 1113312-20 Hardware CODE: 156050732 SW: DMA24_MR 230V/roHz T65 Date: 09-281 Can anyone help to advise the best place to get one


... Electrolux Dishwashers

Low rinse code in electrolux dishwashers - Electrolux EIDW6305GB 24 in. Built-in Dishwasher


Check your water pressure in your home and to the unit. Also make sure the sprayer arms are not loose or broken. Water pressure is the only thing that moves the arms around for any cycle. ... Electrolux EIDW6305GB 24 in. Built-in Dishwasher

Electrolux dishwasher error code 11 - Electrolux Dishwashers


You are experiencing a drain valve issue. Main Control Board timedout before receiving status of drain valve. Check wiring between Main ControlBoard and drain valve. If correct, replace drain valve. If error still exist,replace Main Control Board. ... Electrolux Dishwashers

Electrolux E1DW6305GS0 error code 08 - Electrolux EWDW6505GS Fully Integrated Dishwasher with 9 Wash Cycles, Nylon Racks, Wave-Touch Contro... 24 in. Built-in Dishwasher


Hello ericsson1 - Typically error code E08 indicates that the control has detected a stuck or shorted key on user interface board. The wiring between main control board and user interface will need to be check by a certified professional. Dependin ... Electrolux EWDW6505GS Fully Integrated Dishwasher with 9 Wash Cycles, Nylon Racks, Wave-Touch Contro... 24 in. Built-in Dishwasher

I have a Kenmore Elite dishwasher (model 665.1315), and the dishwasher will run through the wash cycle as expected, but when it gets to the heated dry cycle , it doesn't appear to dry. It will then flash a fault code 81 (8 short flashes of the 'clean' light, pause, and then 1 more short flash of the 'clean' light, longer pause, and repeat the code). The dishes seem to be somewhat dry, but there is certainly water on the dishes and on the tub (there is never any water standing in the tub, and t


Hi,Check your heating element.. \012A bad heating element causes many problems in dishwashers...Dishwasher Problems The ... Kenmore 24 in. 15932 Built-in Dishwasher

Hello, dishwasher whirlpool ACP 4738 display fault code fb (f6 ?) after 3 minutes run. Do you know what fault code means ? Thank's DT


... Whirlpool Dishwashers

Electrolux dishwasher error code 01 - Electrolux Dishwashers


I found the error codes in the owners manual, (01) is a leak. I called customer service (no wait time) and they said there is pan under the tub that will contain and detect water if it leaks. They said I could wait for it to dry out. They said there ... Electrolux Dishwashers

Fault code hotpoint dwf70 dishwasher has a recuring fault code al99 , what dose this mean. thx kev


... Hotpoint 24 in. FDW60 Free-standing Dishwasher

Our Asko 3530 dishwasher is giving us a 'water inlet fault' code. The machine goes through the pre-drain at cycle start then begins to fill, continues until it's full then kicks out the fault code. I have changed the inlet valve, reset the system to factory default and taken off the lower front panel, finding the overflow area to be dry. Is it time to call for service or is there something else to try before spending the big bucks?


Hi,This sounds like either the overflow sensor or the water control valve is stuck.Usually the valve is a solenoid valve that controls the entrance and fill of the water. If the overflow sensor is underneath, there may be wate ... Asko 24 in. D3530FI Built-in Dishwasher

Kenmore Elite dishwasher won't finish cycle. I have the same model, problem, symptoms, and fault codes as in thread: http://www.fixya.com/support/t7120066-kenmore_elite Model: 630.16303401 Fault code: H The water at the faucet is hot: 120F I pulled the control board and all the solder joints looked good--there were no signs of burnt solder joints, missing solder, cold solder, etc I measured the current on the grey-black wire at less than 1 (one) amp when the t-shoot says it should


Hello\015\012& Welcome to FixYa\015\012\015\012If\015\012the water inlet valve is fine then it can be a shorted wire or the heating\015\012element itself that is bad and needs replacement. Please get back to me if you\0 ... Dishwashers

I have dishwasher (Electrolux) model ewdw6505gs. How do i clear a code of 01? I fixed the disposal clog and the dishwasher automatically drained the water in the bottom. I just can figure out how to clear the error code.


I should inform you that that is a "leak detection error".\015\012You should check some of those hose clamps, they may not be tightened properly.\015\012\015\012Regards ... Electrolux Dishwashers

E11 code on electrolux dishwasher - Electrolux Dishwashers


You are experiencing a drain valve issue - Main Control Board timed out before receiving status of drain valve. Check wiring between Main Control Board and drain valve. If correct, replace drain valve. If error still exist, replace Main Control Boa ... Electrolux Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1888 seconds