Having problems with your Equator 23 in. WB72 / BB72 Built-in Dishwasher ?

Equator WB-72 Dishwasher. Recently, the knob that

\015 Equator WB-72 Dishwasher. Recently, the knob that controls the run cylce is sticking causing the dishwasher to run continuously without ever stopping. Can't find a repair place in Seattle to assist. Any recommendations?\015

Answers :

Repair Help & Product Troubleshooting for Equator 23 in. WB72 / BB72 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have an Equator Mini Maid PLS602S dishwasher. It works fine, but the upper spray arm fell off and the clip and knob holding it in place are missing. Equator said they no longer make this model and don't have the parts. Can you tell me where to get the clip and knob to hold the upper spray arm in place. I know there is a little white clip - I actually had it but lost it, because when I tried to hold the arm in place with that, the next time I ran the dishwasher the arm fell off again. I


There are no parts sources that i can find for this dishwasher, but my suggestion to u is this, locate an appliance repair shop in the local area that has dishwasher parts, bring the portable unit down to the shop and see if they can mat ... Equator Dishwashers

Equator WB-72 Dishwasher. Recently, the knob that


... Equator 23 in. WB72 / BB72 Built-in Dishwasher

There was no category for general home repair or locksmith services, so I hope someone can help me. The doorknob on my master BR closet is broken... the knob will turn but nothing happens. The door opens into the closet, so I cannot access the screws or the door hinges on the inside of the closet. The molding on the bedroom side of the door prevents me from sliding a credit card to move the latch. The knob has no lock, just a flat surface on the knob, but other bedroom doorknobs have a small acc


I used a hatchet. You have to replace it anyway. ... Dishwashers

How do i replace the timer knob on my simpson eziset 52b890. The handle part of the knob on our dishwasher has snaped off .


... Dishwashers

Hi! My dishwasher's programm selector knob is broken , the dishwasher is working but I dont find enywhere a knob. Tryed on ebay and shops no luck. Can you help me?


Hi.Depending\015\012 on the model number you can find wiring parts for most models on \015\012the web sites listed at the link below. Try Partselect and \015\012Appliancepartpros : ... Dishwashers

I have a Bosch 2046 UC DW. When you try to start the cycle you hear the timer clicking. The knob slowly rotates to where it should start the cycle but stops there and won't start the operation. If yiou advance the knob it opens the soap dispencwer but the pump or cycle will not begin gerald qually


The programmer is faulty, effectively worn out, and needs to be replaced. You may be able to service the mechanical parts of the programmer by cleaning and lubricating it and possibly by replacing the springs but it's just easier and less time consu ... Dishwashers

Whirlpool dishwasher cycle control knob broken ( I think the dishwasher model is 8051219). How do you gain access with intent of replacing the knob ?


... Dishwashers

KENMORE MODEL # 363.16222100 Hello - my dishwasher (model# above) is currently filled with H20 and will not drain/work. When the knob to select the dishwasher cycle to begin is turned, it just 'clicks' and does not engage the washing cycle. When I tried to just let it run the cycle as is to 'restart', it had an electrical odor to it., Currently the knob is at the 'Rinse & Hold-(Heated Dry Off)' part of the cycle and all dishes have been removed. I would appreciate any assistance available. Thank


Either the motor is locked up or the control failed. You will need a service visit. If it is over 10 years old, I would buy new. ... Dishwashers

My Bosch SHU 3030 gets stuck during the washing cycle and will continue to run indefinately until the wash cycle knob is rotated a little bit, then it will work fine for a few more minutes until the knob gets stuck again. Whats my solution?


... Bosch Dishwashers

The selector (rotary knob) are not really realable now.This knob, control all the differents washing cycles.Its for a Maytag WU401 series 01 serial# 192201. How much$$$$$


HI, you can purchase this timer device at the link provided below. It will cost $99.95 plus tax.\015\012\015\012CLICK HERE ... Dishwashers

Westinghouse undercounter dishwasher. after shutting door with latch, comes on when dial knob turned to selected wash. was taken out to redo floor underneath. after being placed back in position, did at least 2 loads fine. now after dial knob gets to selected wash, dishwasher light comes on and i can hear the motor try but then starts clicking. there is also water at the bottom inside the dishwasher


This seems to be a drainage problem, obviously. There may be some food debris in the drain tube where it connects to the drain pipe. It would be easy to detach and do a visual check, and see if you can clear the clog. Also, try to s ... Dishwashers

Tricity Bendix model no DH090,control knob sticks at various points within the programme on all programmes,when you turn the knob to assist with wash programme , dishes etc are cloudy and gritty at end of programme


... Dishwashers

Model #363.14232100 dishwasher. When you turn the switch to on, it will not come on. If you keep turning the knob slowly you can hear the dishwasher trying to start up,but it doesn't. Keep turning the knob and its the same thing, sounds like it will start, but it doesn't. It did fill with water, but once it was opened it didn't start up where it left off. The lock switch was in position, and still nothing. Now I have water in the bottom but can't get the thing to come on. Any suggestions? Help!


... Kenmore 24 in. 16539 Built-in Dishwasher

The Rinse Aid Dispenser Knob has melted on my Whirlpool GU2400XTP dishwasher. Can this knob be purchased?


Try this link and choose your model \015\012http://www.appliancepartspros.com/partsearch/modelsearch.aspx?model=GU2400XTP ... Whirlpool GU2400XTP Built-in Dishwasher

Parts needed I need an outlet pipe Part# V24A000Q8 and four brackets Part# V13A000A9 for a Equator model #SB-72/1 dishwasher. Any place where I can find them. Equator is out of stock and it could take 6 weeks to order. I would appreciate any help you can give me! Thanks, Pearl


If the manufacturer is out of stock...chances are you will not be able to find them anywhere else. Your best bet would be to go to a metal machinist shop and have some custom made. You can have this done for the pipe as well. ... Equator SB72 Built-in Dishwasher

Dishwasher GSD2030F03WWSA735136B Model Series number;Piece fell off inside front panel, making it impossible to turn on dishwasher at all..so I took off front panel screws, opened dishwasher and saw white plastic piece but can't find where it goes but it must have something to do with turning the knob to start dishwasher because the knob won't turn now..so it must attach inside somehow but I can't figure out where it goes...help!!


I think you need to get a new knob, write down the model number and make and take the pieces to your local domestic appliance supplier, there might be something similar in stock. Now I do mean the kind of small supplier that understands this kind of ... Dishwashers

Asko D1706 Dishwasher will no longer respond to control knob, turning knob clockwise has no effect on cycle nor will this turn dishwasher off! Dishwasher appears to be stuck in some part of cycle but will no longer wash dishes, door must be left open or will not turn off!


I also had this problem.\015\012Support person couldn't tell me if the pump was supposed to run even when setting the control knob to 'off' (bar before (1)).\015\012After draining the pan, the control knob functioned normally. So apparently any power ... Asko D1706 Built-in Dishwasher

I have Whirlpool dishwasher about 3years old it is the ADP7966 AAA 6th sense. When I put it on and turn the temperature knob, only the first temperature green light comes on althou I can turn the knob all the way round none of the other lights come on, my rinse aid and salt programmes light up thou ,and when I press the start button it flashes twice stops a bit then flashes twice again, and thats all it keeps doing. I would be very grateful if you help to solve the problem. Many thanks to you.


... Dishwashers

My dishwasher SMS 448 works up to the point in the cycle when the dispenser is supposed to dislodge the Powerball detergent. It doesn't, and the machine stops. If I open the door and click the dispenser, the Powerball falls into the dishwasher unit itself. But when I close the door, the machine doesn't operate until I turn the knob a bit farther on in the cycle. Then, no water comes out, but the knob moves on in the cycle and the heating pipes heat up


... Bosch Dishwashers

Not working When I turn knob it makes sound like it is starting but will never start. This applies to any position of the knob. Any help is appreciated.


I discovered a completely different solution, that I'm actually embarassed to mention, but here you go. After following the advice of jbjaxiis (thanks for the suggestion) and not finding the problem, I ended up looking at the electrical cord. I fol ... GE Nautilus 24" Built-in Dishwasher

Broken Knob to turn on dishwasher ( Need Replacement knob)


... Smeg Dishwashers

Need presssure inlet knob for coleman pw0701200. no pressure, knob pops out.


... Pressure Washers

Equator sb924 wiring diagram - Equator SB72 Built-in Dishwasher


... Equator SB72 Built-in Dishwasher

Dear sir, I have very old Gorenje dishwasher type PMS 201.Recently I have changed programmator with new one but problem is the same.When I put knob on 1 and 2 machine is working ok but if I turn the knob to 3 it does not receive water. I have checked both solenoids and theay are ok.Where to look for the problem.Thanks and best regards Nino


... Dishwashers

Roper washer control knob not working - Roper Kenmore Brand Washer Control Knob 3398393 388026


... Roper Kenmore Brand Washer Control Knob 3398393 388026
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0177 seconds