Having problems with your Equator Dishwashers ?

I have an Equator Mini Maid PLS602S dishwasher. It works fine, but the upper spray arm fell off and the clip and knob holding it in place are missing. Equator said they no longer make this model and don't have the parts. Can you tell me where to get the clip and knob to hold the upper spray arm in place. I know there is a little white clip - I actually had it but lost it, because when I tried to hold the arm in place with that, the next time I ran the dishwasher the arm fell off again. I


Answers :

There are no parts sources that i can find for this dishwasher, but my suggestion to u is this, locate an appliance repair shop in the local area that has dishwasher parts, bring the portable unit down to the shop and see if they can match the parts up from some other brand or dishwasher or from the numerous small parts they carry for such problem's, I am almost sure they will be able to find something that will substitute for what you need from generic parts.
Repair Help & Product Troubleshooting for Equator Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have an Equator Mini Maid PLS602S dishwasher. It works fine, but the upper spray arm fell off and the clip and knob holding it in place are missing. Equator said they no longer make this model and don't have the parts. Can you tell me where to get the clip and knob to hold the upper spray arm in place. I know there is a little white clip - I actually had it but lost it, because when I tried to hold the arm in place with that, the next time I ran the dishwasher the arm fell off again. I


There are no parts sources that i can find for this dishwasher, but my suggestion to u is this, locate an appliance repair shop in the local area that has dishwasher parts, bring the portable unit down to the shop and see if they can mat ... Equator Dishwashers

Need part: retaining clip to hold on upper spray arm in dishwashe


... Maytag 24 in. MDB5600A Jetclean II Built-in Dishwasher

Upper spray arm and tube assembly. This part fell off the back wall. Can not figure out how to get it to stay on again. Looks like it should clip in, but nothing to snap it in place. The part does not look brocken when compared to the part would order to replace. No info in the manual and their service department was no help, How do I fix this.


Hi,\012Those p[arts wear and even though the parts do not look broken they are not up to the specs. of a new part...\012That is not that hard to fix and you can easily buy the parts yourself online... ... Bosch 23 in. SHU 8805 Built-in Dishwasher

Need part for a Miele g841sc-i dishwasher. The part needed holds the upper spray arm in place. Not the piece on the spray arm, the white piece that you can unscrew from the top of the tub.


Hello mikesrepair,Try THIS website. They have parts for most white goods. Hope that helps. Should you have any further questions, please feel free to\015\012post th ... Dishwashers

Frigidaire dishwasher pld2850rdc2...upper spray arm fell. I twisted off the top w/ 8 teeth around the circle. A white circle attaches, but doesn't hold the spray arm tight. Am I missing a part, or is the small white circle thing busted.


... Frigidaire 24 in. PLD2850 Built-in Dishwasher

The rubber clip which holds the upper spray arm has broken


OK, well, the only solution is to go to your local parts place for appliances and get a new clip and install. ... KitchenAid KUDI01TBK Dishwasher

Hi I've inherited a Zanussi DA6142 Dishwasher from a recent house move. It was treated quite poorly by students who I suspect ran it without the filters in place. I've used a dishwasher cleaner and was able to pull out the lower spray arm and rinse out all the crud that was blocking it (small stones, food, plastic, pieces of glass, paper, etc) but I cannot for the life of me work out how to get the upper spray arm out. The PDF manual I've downloaded for this model says DO NOT remove upper spra


... Zanussi Dishwashers

Kenmore BuiltIn Dishwasher Stock 17512 Model 17512200 Type 575-0 Serail FM3309375 Probelm: Water sprays out of lower arm weakly, and not out of upper arm at all. Action taken: Unscrewed the 4 screws holding down the item underneath the lower spray arm, and then the small item under that. Found major refuse from years gone by, removed, cleaned. Reassembled, same issue. I suspect I have to get 1 more level down, to the intake for the pump? found 2 screws to remove, but was not suc


... Dishwashers

Upper Spray Arm fell off GE Profile Performance Dishwasher


... GE Dishwashers

Upper spray arm fell off, can not repair nor find part


I had the same problem, but was able to find the replacement part at http://www.partselect.com/shipping.aspx. My old arm also has the number 1544681 on it. If nee ... Frigidaire 24 in. PLD2850 Built-in Dishwasher

Upper Spray Arm fell off GE Profile Performance Dishwasher


... Dishwashers

NEED PARTS TO HOLD UPPER SPRAY ARM ON MODEL: FDB4315LFSO WHITE INSERT WILL NOT LOCK INTO THREADED UPPER UNIT?? PC MISSING ??ARM ISELF IS 9" LONG AND HAS NUMBER 1644681 ON IT. ONLINE SITES CAN'T IDENTIFY IT?


... Frigidaire Dishwashers

Hi, When I turn on my dishwasher, it fills as normal with water but is not pumping into the upper spray arm. the spray arms are not clogged, I have checked them. Anyway, I always rinse the dishes under the tap before placing them in the dishwasher. I have to switch the machine on/off several times then the pump starts at full force.Occasionally it goes through a complete cycle without havig to switch on/off. It's a Siemens Lady model, E-NR SN53300GB/08, FD 7201 058479. The dishwasher is used


... Dishwashers

Upper spray arm falls off during wash


... Asko 1595 Dishwasher

I have a Frigidaire dishwasher model # GLD3450RDS0 and the upper spray arm has come off. I have the arm but it will not go back in place. Am I missing a washer or something to secure the arm? how do I secure the piece back on?


\012Hi,\012You will need to get replacment parts...\012That is not that hard to fix and you can easily buy the parts yourself online...Here is a tip that will help you ... Frigidaire Professional Series 24 in. Built-In Dishwasher Dishwasher

Miele g660 dishwasher upper spray arm fallen off, broken ring.. Do I buy retaining nut... Which looks ok to me or arm... Which also looks fine! Where do I get the thing that holds the arm up onto the


... Miele Dishwashers

I have a frigidaire dishwasher - model number PLDB998AC1. There are two spray arms in this dishwasher - lower and upper. The lower works fine but the upper spray arms are not spinning. There is what I think adequate water pressure coming in from the top but no movement on the upper spray arm. Here is what I know: 1) The water pressure and spray arms alternate between top and bottom. 2) The upper spray arm moves freely when I push it gently. 3) I have removed the pump and cleaned out an


... Frigidaire 24 in. GLD2162RDC Stainless Steel Built-in Dishwasher

Upper Spray Arm Fell Off


If you are referring to the arm on the top of the dishwaser (not the one under the top basked) it snaps in. What probably happened is that it fell off and the plastic nut flipped around. The gray plasting thing on the top (that looks like a flower) ... Frigidaire 24 in. FDB435RFR Built-in Dishwasher

I have a GE Dishwasher model #GSD4134Z02WW. I am trying to remove the lower spray arm. Mine is cracked. There are no screws or bolts holding the arm in the dishwasher that I can see. The new piece appears to have threads on it as to indicate that you would just screw it in place. The old piece doesn't screw/turn. How do I remove this piece?


Whack it with a block of wood and a hammer ... Dishwashers

Frigidaire dishwasher upper spray arm fell off. Can the part that it was attached to be removed and then the arm can be attached


... Frigidaire Dishwashers

Bosch dishwasher Model SHU 4302 UC Bracket holding upper spray arm came off when upper rack was removed (had never happened before). Cannot figure out how to reattach bracket. No "parts" or loose pieces on the bottom so doesn't seem like anything broke. Thanks.


Hello. Here is a diagram of the upper rack\015\012http://ww ... Dishwashers

I have removed the upper rack to repair a plugged circulating arm and am having trouble positioning the clips that hold the rack level for loading the glassware. Is there a schematic or drawing available that outlines where the clips precisely go?


Appliancepartspros.com has diagrams for that model. Here is the link that should show the upper rack http://www.appliancepartspros.com/partsearch/model.aspx?model_id=238625&diagram_id=20702#d20702If that doesn't work, pu ... KitchenAid KUDS24SE Built-in Dishwasher

My Kitchen Aid KUDS01DJSS0 seems to have water going to the upper spray arm (I see water coming out of the unit just beneath the upper rack), but the pressure doesn't seem to be high enough to clean the upper rack. No evidence that water is coming out of the spray arm on the very top. Lower rack dishes seem to clean OK. I have already removed the whole upper spray arm assembly and inspected the flapper valves that the middle sprayer goes into. I suspect that it's not making good enough contac


... KitchenAid Dishwashers

I have a GE Profile, GSD4930X73WW, dishwasher. The upper wash arm is not spraying well at all. I checked the water line from the pump to the upper arm and it's fine. I cleared the filters and cleaned the float. I also took the inlet valve off and cleaned the screen. Although the washer works better overall, the upper arm still does not work well. Nothing appears to be in the upper arm assy to clog water from spraying out. All seems clear from the turbid sensor (next to the pump) through t


... GE Dishwashers

Upper spray arm is not turning and I don't think water is coming out. Dishes on top are not coming clean. Dishes on bottom are clean (as clean as they get with this dishwasher). How do I remove upper spray arm. Also I'm not sure how to remove lower dish rack to access upper spray arm. Any help appreicated. Kitchenaid model KUDP01FLSS5 Chris


Hi Chris,It sounds to me like a restriction in the pump. I put together some information here on cleaning it out. If you try these please give me some feedback as to if they help or not.Thanks! ... KitchenAid 34 in. KUDP01FLSS Stainless Steel Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0830 seconds