Having problems with your Equator SB72 Built-in Dishwasher ?

Parts needed I need an outlet pipe Part# V24A000Q8 and four brackets Part# V13A000A9 for a Equator model #SB-72/1 dishwasher. Any place where I can find them. Equator is out of stock and it could take 6 weeks to order. I would appreciate any help you can give me! Thanks, Pearl


Answers :

If the manufacturer is out of stock...chances are you will not be able to find them anywhere else. Your best bet would be to go to a metal machinist shop and have some custom made. You can have this done for the pipe as well.
Where are you located?
Repair Help & Product Troubleshooting for Equator SB72 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Parts needed I need an outlet pipe Part# V24A000Q8 and four brackets Part# V13A000A9 for a Equator model #SB-72/1 dishwasher. Any place where I can find them. Equator is out of stock and it could take 6 weeks to order. I would appreciate any help you can give me! Thanks, Pearl


If the manufacturer is out of stock...chances are you will not be able to find them anywhere else. Your best bet would be to go to a metal machinist shop and have some custom made. You can have this done for the pipe as well. ... Equator SB72 Built-in Dishwasher

When I turn on dishwasher it sounds like it's chewing up rocks. Found a broken plastic disk as I was taking it apart just above black plastic rotor above motor. Where can I find an exploded view of parts so I can order the proper parts and attach it in the proper way because original parts are destroyed ?


... Jenn-Air JDB6510 Built-in Dishwasher

It has stopped working, There is power going into te machine. An engineer from Repaircare said it was the programmer, ordered a new on vcame to fit it said it was te wrong one. Ordered anoter one Whirlopool saaid it was out of stock, on back order. Waited 3 weeks engineer came with new programmer, fitted it it didnt work. Said maybe they can't fix it. Thew nachine is only two years old and a popular make. WHAT CAN I DO???


Hi,I am sorry to hear regarding the problem. You need to have some patience in order to find what's actually work with the Dishwasher. I cannot jump to the conclusion as there might be "N" number of reasons.Now, Fi ... Whirlpool Dishwashers

Brand new dishwasher, installed last week. When it is done there is quite a lot of water standing in the bottom of the tub. It has only been run 2 times since installed and both times several inches of water were left standing. Is this something we could check or do I need to have the installer come back, which will probably take a week at least. Oh-KitchenAid #KUDC031VWH


First was a new garbage disposal also installed? There is a knockout on the garbage disposal where the drain hose connects to.\015\012If that is not the problem make sure it has the correct high loop or also called air gap. If that is not right ... KitchenAid KUDC03IVWH Builtin Dishwasher

My Equator door hinge broke to. Where can I get parts for the little PLS602S? I ordered a door for it once before about six years ago. But do not still have the information on the place where I ordered it.


... Equator 20 in. PLS602 Free-Standing Dishwasher

The thermostat seams to have given up in my bosh dishwasher and it is taking over2 hours to do a load I was wondering if I could buy a thermostat and get some Instructions and diagrams on who to instal the new one . Must be 8 to10 years old. No one in my are fixes or can buy Bosh parts I was hoping you could help. Kind Regards Anthony Lee


Hello Anthony. Yes. For Bosch parts and parts diagrams go to this link RepairClinic.com\015\012\015\012Enter your model number and you will have access to 500 Bosch parts and more. I use this site daily and it is excellent. The part will c ... Bosch Dishwashers

I have a model 665.1576 or 1676 my paperwork does not have the number on it and no part number on he machine, but I ordered parts from the catalog which matched. about 7 years old, stopped draining, so I changed the Seal kit, pump base seal, impeller, plus drain cover gasket but not the pump gasket could not find it, reinstalled, pump works but much slower and times out, have to hit drain button to get all water out. Keith


... Kenmore Dishwashers

Parts for LG Dishwasher take weeks to get.


You could order direct... maybe quicker\015\012http://www.lg.com/us/support/parts/support-find-parts.jsp\015\012I got my part in 3 days ... LG 24 in. LDF 7811 Stainless Steel Built-in Dishwasher

My dishwasher stays stuck on '1 minute', and will not complete the ccycle or drain the water. I tried to do another cycle on it, and it went to 8 minutes, and then jumped backl to 13 minutes, and repeated that pattern until I finally just opened it to stop it. I had one visit from a repairman last week, who said it could be a number of possibilities, and he charged me $75 and said he would return in a few days when he was not so busy. I am fairly handy, and if I knew exactly what part to replac


Make sure that the drain spigot is not blocked under the sink. Water has to pump out OK.\012Then the most likely fault is the release valve at the bottom of the heat exchanger. It jams because the plunger corrodes. To see to this you will need a comp ... Bosch 24 in. SHU6802UC / SHU6806UC Built-in Dishwasher

I have a Whirlpool DU1055XTSS dishwasher that completely stopped working. I took it apart, found the thermal fuse to be bad, ordered a new, then replaced it and it worked for 2 loads. Now the thermal is open again. What could be "taking it out"? Is the thermal fuse strictly a thermal or does it repsond to current? It's 2 years old, i have already replaced the heating element, the main control board, and now the thermal....twice.


Hi.If the thermal fuse is blowing, that means that there is overheating.Common causes for overheating are:Thermostat cutting off too late.Plugged element.Plugged element means that the element sta ... Whirlpool Dishwashers

Just bought this dishwasher and the cap for the rinse aid is missing. Any idea what the part number would be so I could order it


I will need the model# to locate the correct part. ... Dishwashers

Washer won't start tried everything , I could think of changed spark plug tried new gas , Two things that bother me are . if i take out the spark plug and put my thumb over the spark plug hole theres no pressure and the wire that comes from the coil to shut off the pw it has continunity from the coil to the pin that sticks up to shut off the pw but it also has continuity from the coil to all parts of motor.


... Pressure Washers

I have a Whirlpool DU1055XTSS dishwasher that completely stopped working. I took it apart, found the thermal fuse to be bad, ordered a new, then replaced it and it worked for 2 loads. Now the thermal is open again. What could be "taking it out"? Is the thermal fuse strictly a thermal or does it repsond to current? thanks


Water is getting on the wiring somewhere, take it apart right after a cycle and see if you have a door leak, or the motor is going bad ... Whirlpool DU1055XTS Built-in Dishwasher

Kudc10fxss4 I have a KitchenAid KUDC10FXSS4 w/o any power. Circuit breaker is on, and it's getting power. But there are no lights on the display. I called a parts place to see if I could order a thermal cut off fuse. But the representative stated there is no fuse listed for this model. Any ideas on what would be causing a loss of power? Seems odd/wrong to me that there wouldn't be a fuse. If there is a fuse, would it be located in the door (the control is built into the door, such


... KitchenAid Dishwashers

Dishwaher was inoperable for 2 weeks waitng for part, now theres a horrible smell like old water that perhapl leaked into the wall-the repair man did not take the whole unit out--i've put bleach, disinfectant, in the under the counter sink next to the unit nothing works--is there any moisture absorbing chemical i can use


You should take out the filters in the base of the sump and clean them. also clean the sump. Then take off the door outer liner and clean along the bottom of the door seal. The bottom of the door seal is the worst place whaer a build up of greas form ... Dishwashers

Heller HDW12 at first it wouldnt do a complete cycle, now it wont do any cycle. I can turn it on, it has power it just wont wash, it makes a noise but its not washing. The tap is turned on. Could you please help me as I live in Kalgoorlie and it takes weeks to get a plumber, and he's not cheap...probably cost me my first born!!!! regards B Hughes


... Dishwashers

I have a whirlpool dishwasher ADG 957 , inside at the top there is a round rubber seal which has perished allowing steam to escape during the wash cycle, could you please let me know what the part name is i need to order Thank you


... Whirlpool GU2400XTP Built-in Dishwasher

Like the other writer,mind to fills with water when it's off. I looked at video my model is SHU43CO2UC,I don't have that part in my tub. It could take 10-12 hours before it overflows.


Your water inlet valve on the back where the water supply comes in is sticking. It needs replacing. ... Bosch 24 in. SHU43 Built-in Dishwasher

I was given a low hour, 10 year old, CH PW205002LE 6.5 HP gas vertical shaft 2000 PSI/2.5 GPM pressure washer with a Lavor pump. It did not work - no pressure. I found a broken o-ring on the brass unloader valve and replaced it with a ring as close in size as I could find as the part break down doesn't state size. Everything was very clean. I coated everything with silicine grease and reassembled, seating the brass piston? as deep as it would go. I had to press the trigger in order to get the mo


My personal experience is that 40% of all the sellers I dealt with on e*** exaggerated their products or worse. If you decide to go the e*** way be sure you put it on a good credit card so you can get your money back if it's a bust. Don't use your ba ... Campbell Hausfeld Pressure Washers

Fisher paykel Hi I have a fisher paykel dd603 dishwasher. when I run the bottom drawer on its own ,,it also fill the top drawer with water ! so after the dishwashing cycle , im left with water in the top drawer. im guessing that a valve should close on the top drawer to stop this happening? is there a part I could order and replace myself? thanks jbuttery6@hotmail.com


Check your email ... Fisher and Paykel 23 in. DD603H SS Free-standing Dishwasher

The dishwasher is leaking on the right side, could I order parts for the dishwasher?


Hi,\012That is not that hard to fix and you can easily buy the parts yourself online...Here is a tip that will help you with the online buying...How to Buy ... GE Nautilus 24" Built-in Dishwasher

DD603 Double drawer dishwasher: How do you take the clear coverplate completely off the top drawer in order to replace the motor? I can't figure out how to remove the part that attaches to the front of the drawer.


I am assuming you are fully conversant with the unit and have taken out the drawer from housing rail.\015\012\015\012To get the wiring cover off you then have to..\015\012Carefully release the four wiring cover clips from the fro ... Fisher and Paykel 23 in. DD-603 Built-in Dishwasher

I have a Danby dishwasher model 1802W-1. I ordered a new upper rack because the wheel broke. The old basket was accidentally thrown out before I could remove the upper spray assembly. Is there a kit replace? What parts would I need to replace?


... Dishwashers

I urgently need the template for dishwasher PDW9700N panel(pub # 5-x063). I ordered one last week and I got the owner's manual instead. I have an appointment to place the order for my cabinets at 5:00 this afternoon and cannot watir another week for the template to arrive. Can you help me by supplying the dimensions? If I have the outside dimensions of the panel, I can order it. Thanks, Don McCann


I finally got a real live person at GE who gave the specs for the panel and I was able to order my cabnits.\015\012\015\012Thanks,\015\012\015\012Don McCann ... GE Dishwashers

Where do I order part for Haier Portable Dishwa


Hello. Try going to the link below. If it won't open when you click on it, try copying and pasting it into the URL bar. \015\012 ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0720 seconds