Having problems with your Estate Dishwashers ?

My dishwasher makes a terrible grinding sound during most of the cycle. When it first starts up it does not, then after about five minutes it starts in. It it very loud and continuous. We have taken the screws out of the bottom and check to see if anything was caught in it. Nothing was there and it still grinds. The dishes are spotless, but the sound is terrible. Any suggestions? Thank you. Alice Henning


Answers :

Check the wash pump maybe have a foreign object inside of it or check the pump motor for possible bearing problem.
Repair Help & Product Troubleshooting for Estate Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My dishwasher makes a terrible grinding sound during most of the cycle. When it first starts up it does not, then after about five minutes it starts in. It it very loud and continuous. We have taken the screws out of the bottom and check to see if anything was caught in it. Nothing was there and it still grinds. The dishes are spotless, but the sound is terrible. Any suggestions? Thank you. Alice Henning


Check the wash pump maybe have a foreign object inside of it or check the pump motor for possible bearing problem. ... Estate Dishwashers

Kenmore 17369 When cycle starts... it sounds terrible (crackly sounding).... doesn't sound like the water is coming into the dishwasher. If I add water to the machine during a rinse cycle...it will wash and drain on its own.... Then I hit cancel. Please help.. I can't locate the owners manual.. Do you know where I can get one.. I understand that you can open the bottom up and see if there is anything lodged in the bottom of the dishwasher. Please help! thanks Cheryl


The problem is your water inlet valve. If you remove the panel at the bottom of the dishwasher you will see\015\012either a copper hard pipe, or a flexible steel hose leading into the\015\012water inlet valve.BE SURE TO CUT OF ... Kenmore 24 in. 17362 / 17364 / 17369 Built-in Dishwasher

Dishwasher is making a loud grinding noise when it's started. Doesn't matter the cycle choice; the cycle starts as normal then once started up starts making a sort of grinding noise as the water is pulsing, like something is stuck or blocking the "push" of water. I couldn't see anything stuck in the bottom - any thoughts before I call a repair person? I've never owned a dishwasher before - maybe there's a basic drain/blockage thing I should check out first? And, any recommendations for repair


... Maytag 24 in. MDBH970AW Built-in Dishwasher

Kenmore elite dishwasher won't drain, water stand in bottom. It doesn't sound like pump turn on. We tried to start a load and cancel it to see if it would empty. Didn't hear anything after we pushed cancel button


... Kenmore Dishwashers

Dishwasher sounds like it is running normally, (no grinding sounds or anything)but there doesn't appear to be any water coming into the machine. we checked to see if there was a kink in the line or if perhaps it was a plumbing problem but that does not seem to be the case. I know the circular disk in the front of the machine needs to be down and it is, so can you figure out without seeing for yourself what could be the problem and if so is it worth fixing since I can probably replace it for und


Hi there,\012Well first of all you can check out the following -Water-inlet valve - The water-inlet valve lets water enter the machine. If this valve is defective, you need to completely replace it. It's usua ... Dishwashers

Water doesn't drain in the bottom of the dishwasher. I have taken all the pieces out and checked for anything clogging it but couldn't find anything. When I first start it on Normal Wash it seems to wait for 30 sec to a min before it starts. It never did this before.


Usually this would indicate a pump stuck by debris, but check the condition of the outlet hoses first.\015\012 If they are severrely clogged, try a couple of cups of washing soda in there, then wash through with a few bowls of hot water with th ... Frigidaire Professional Series 24 in. Built-In Dishwasher Dishwasher

Dishwasher leaking Our dishwasher all of a sudden started leaking. I've taken the front panel off the door and can see exactly where. It's not a hole or anything...it's at the front, left edge of the basin, the bottom left corner at the front. It seems that right after it fills with water, it starts to leak once water is moving around inside and washing cycle starts. It is as if big waves are being pushed to the front left corner and over the lip of the basin. I don't think the water level is to


Just an idea...if i'm understanding you correctly,could the door seal be creased there or folded over by use and age to permit this to happen? cause you said nothing is missing ... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

We have a Kenmore Elite Dishwasher #665.1646 - 5yrs old. On Friday nite, there were no problems but last nite the lights would not go on when cycles were pressed ( or Start). Checked the circuit breaker and it was OK. There is nothig caught in the bottom and the overfill float is functioning. I pressed Hi-temp and Air dry alternately and all the lights lit. I pressed Smart Wash, then Start and it did not go on. I can hear it draining but no water seems to flow and then it stops. All light t


The thermal fuse on the control panel. There isa couple of wires that lead up to a white box with the fuse in it. Thatis the problem. If you are good with a volt meter or light and youplace it across the fuse, if it is bad the light will light ... Kenmore Dishwashers

Hello, Our kitchenaid DW has stopped working. Non of the buttons cause a any of the lights to turn on. Of course, it will not start. On its last working cycle, it had a very strange washing cycle. It almost sounds like the water was not splashing around (even though I opened it while it was working and noticed water at the bottom). I checked the circuit breaker, and it is not tripped. For a couple of weeks, the DW had started making a kind of metallic noise while in the washing cycle. Also,


It is nice to see a problem described with such a depth of observations. It helps in closing on to the possible causes of the problem.\015\012\015\012For the moment let us make sure there are no remnants of the glass left in the dishwashe ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

Dishwasher will not drain there is a bunch of water in the bottom. Tried running it through the cycle to make it drain out but still nothing just water in the bottom. Checked the sink and garbarge disposal to see if anything was blocking it or clogging it up but got nothing. Any suggestions?


Most likely a bad drain valve solenoid.\015\012It is attached to the side of the motor.\015\012The GE solenoids tend to burn out. ... GE Dishwashers

I have a GE Max,mod # GSD6610G00SB....when I press the start button, the vent closes and before anything else happens the breaker is tripped. I have checked all wiring and looked to see if water has shorted anything on the unit.


... GE Nautilus 24" Built-in Dishwasher

Vibrating noise when running the dishwasher. No error messages on the display. We looked to see if something was caught in the bottom, but don't see anything.


YOUR BELT IS GOING BAD. ... Dishwashers

My ariston lsv 66 dishwasher will not start washing cycle. It makes the pumping noise as it normally does at the start of the cycle and some water enters the bottom of the machine but then it stops. I have checked to make sure that there are no leaks so the problem is with the filling up of the machine. I live in a hard water area and haven't used anything to help reduce the limescale so expect this to be playing a part. I have tried all the washing cycles but the same thing happens. Any advic


HERE I AM I LIKE THIS JOBE\015\012 PLEASE CHECK THE WATER INLET FILTER I FEEL FROM YOUR DESCRIBE IS IT\015\012 YOU NEED TO CLEAN IT BY ASMALL BRUSH >\015\012 THANKS ... Dishwashers

Bosch SHY66C My Bosch dishwasher won't fill with water.  All electrical connections are fine and I can hear it make a sound as if it is trying to start about every 2 minutes.  There was water in the bottom so I used a shop vac and pulled it all out but it still won't start and is doing the same thing.  I checked the solenoid with a multi-meter and it appears to be working.  My power went out last night for about two hours and that's all I can think of that might have affected it.  The dishwasher


I'm a novice on this question, but i agree with the above statement about check the stuck float switch or check for a bad safety switch or lockout switch of some sort. I would suspect something is definately faulty in that area. Will the dishwasher r ... Dishwashers

My dishwasher started making a whirring sound around 20 minutes into its cycle. I took off the drain pipe to check for obstructions, however it was clear. I started the cycle from the start again, and it started the whirring sound from the start of the cycle. There was a small amount of water that drained into the bucket where I had placed the drain hose, however there was not much water in the machine to start with (I checked when it started whirring the first time and there was no water in the


Hi.\015\012\015\012A blocked pump in absence of water won't be noisy from start. Check that\015\012 the whirring sound is not given by the spray arms. Test without baskets\015\012 and check the spray arms assembly.\015\012\015 ... Fisher and Paykel DS605I Built-in Dishwasher

Maytag MDB5000AWW started making noise when cleaning. Bottom arm working , but water isn't pumping with much force. No water coming out of top hole (removed arm to make sure there is no obstructions. Checked down to the impeller (didn't remove), and didn;t see any blockages, etc.


HI\015\012Motor malfunctions usually call for service by a professional. There are three main causes of motor failure: lack of lubrication, a defective motor switch, or worn or frozen bearings. A humming sound can be related to a burned-out mot ... Maytag Dishwashers

I have a DU1055xtss3 dishwasher. It is about two years old. It does fine cleaning the dishes but about a week ago it started making really loud noises. It sounds like it is straining. This dishwasher was never very quiet but it is super loud now. We looked around inside and used a flashlight to see deep inside, everything looks good. Do you have a suggestion. Should I have a plumber check it out?


First find out where the loud noise came from,then check the water supply then check the drying fan maybe some screws are losing ... Whirlpool DU1055XTS Built-in Dishwasher

Our Whirlpool dishwasher, DU1145XTPBA, has almost quit cleaning the dishes. It started with dishes on the top rack. My husband was told by rep to replace the top unit. That did not help at all. Now the bottom dishes are almost as dirty and gritty as the top rack. This dishwasher is too new to have to be replaced and we've already spent $50 on the top rack. Is there anything else to check at this point?


Hi, \012I have an older dishwasher also and recently mywife also complained about it not cleaning right... so me being the man I amtried in vain to clean the things... Bought new spray arms online and installedthem in minutes...now the thing works li ... Whirlpool 24 in. DU1100XTP Built-in Dishwasher

Portible whirlpool dishwasher smelling like melting plastic when it runs. I have already check to see if anything has fell to the element in the bottom and it apears to be clear. any ideas


... Whirlpool 24 in. Portable Dishwasher Dishwasher

Kitchenaid Dishwasher model # KUDS25SHBS1 has started making noise. Noise happens when unit is draining so perhaps its the same mechanism that houses the grinder. Can definetly hear a clicking as something spins around to drain the unit. I have removed the washing armature and plastic skirt around bottom and felt underneath the skirted area, but don't feel anything caught or jammed. Noise is getting louder as more draining cycles are being utilized (i.e. as we use the machine more). Anyone have


Looks like motor noise. Check the pump. ... KitchenAid 24 in. KUDS25 Built-in Dishwasher

I have a Maytag dishwasher #MDBF. It has started leaving small pieces baked onto the glasses and dishes. I have checked the output tube and it seems to be clear and I find nothing in the bottom strainers. can you suggest anything for me to look at?


Hi If the dishes are still dirty after the dishwasher has completed running, first check that you have the right wash cycle selected. This is because you may have selected a short cycle to save water and energy, but it is inappropriate for the load. ... Maytag MDB9600A Jetclean II Built-in Dishwasher

My Asko D1606 doesn't seem to be filling/retaining enough water to pump actively through the swing arms. When I add a litre or so of water in manually and hold in the door catch, I can see it appear to start working properly. The tablet is still sitting on the bottom of the dishwasher after the cycle has ended and the dishes are still dirty. The pump sounds all right and it is emptying fine. Also, probably due to the lack of water, the cutlery basket has melted right through, and I am sure any p


Check to see it the dishwasher has been pushed back ever so slightly. The water coming into dishwashers and exiting are on timers and if the hose is pinched this can affect it. Your dishwasher may appear to be in the same place but just pull it forw ... Dishwashers

It seems like the dishwasher is not getting enough water when it starts each cycle. It sounds like a water hammer. How do I check to see if there is something in the water line?


... Kenmore 16872 Built-in Dishwasher

No power to dishwaser, won't start. I checked fusebox, not the problem. I want to know if there is a fuse somewhere in the dishwasher, I looked and could not see anything, also manual is no help.


You could try checking the door latch/switch. if it is burnt and not engaging, the machine may not start and will appear to have no power. i don't know the color of the machine, the letters after the LC will help with this, however maybe this brea ... Frigidaire 24 in. FDB510LC Free-standing Dishwasher

My GE dishwasher model # GLD6560l0ss makes a horribly loud noise when started and continues through the whole wash cycle. I have checked to see if anything in blocking the arms or maybe it's not closed all the way but nothing is in the way? Any suggestions?


... GE 24 in. GLD6560LSS Stainless Steel Free-Standing Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1488 seconds