Having problems with your Fisher and Paykel 23 in. DD-603 Built-in Dishwasher ?

My f & p dishdrawer model DD603 has fault code F1:

\015 Flood switch has been activated. can i fix this myself\015

Answers :

Yes, you need to gain access to the inside bottom panel of the dishdrawer and drain/dry the water in the bottom panel. When all of the water is gone the polystyrene block will lower and turn off the flood system. You then need to find the reason the unit flooded and rectify it or the unit will just do the same thing again.
Repair Help & Product Troubleshooting for Fisher and Paykel 23 in. DD-603 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Fisher & Paykel DD603 model Upper Dishdrawer has F3 fault code. cycke starts, then stops within minutes. Water in tub after stopping is not hot. Temp sensor bad? Could you please send pdf of servie manula for dd603 please? Thanks [email protected]


F3 means your dishwasher water is too hot. Go to the link below and it will show you how to determine what is causing the error. ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

My f & p dishdrawer model DD603 has fault code F1:


Yes, you need to gain access to the inside bottom panel of the dishdrawer and drain/dry the water in the bottom panel. When all of the water is gone the polystyrene block will lower and turn off the flood system. You then need to find the reason the ... Fisher and Paykel 23 in. DD-603 Built-in Dishwasher

The F4 fault code on my Fisher and Paykel Dishdrawer Model DD603 dishwwasher indicates that the "temperature sensor is faulty. Question: where is it located on the machine and how do I replace it?


The temperature sensor is located on the heater plate(looks like a blob of solder with a thin line leading to a blob of solder,The solder acts as a fuse when it "blows"you have to replace the heater plate.The heater plate is located in each draw (ge ... Dishwashers

FIX F1 FAULT CODE ON FISHER PAYKEL DISHWASHER MODEL DD603


... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

My model number is DD603 The top dishdrawer is draining into the bottom dishdrawer. What is the code to reset the drawers?


The check valve in the bottom drawer may be clogged or defective. the two drain hoses are probly connected to become one. ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Dishdrawer model DD603 gives fault F2 (Motor). Unit has only been used a few times. What to do? Out of warranty.


Ok this is what you do you need to swap over the motor rotors from top drawer to bottom drawer. check for anything jammming the rotor etc when you take it out. if it works with the other drawers rotor then you need a new motor rotor. cheers\015 ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Fisher-Paykel DD603 DishDrawer shows F1 fault code. The Flood Switch has been activated. I need instructions on how to re-set the flood switch. I have two drawers that are possitioned one above the other and the are both giving the error of the activated flood switch. Any advice or instruction is greatly appreciated.


Fisher-Paykel DD603 DishDrawer shows F1 fault code. The Flood Switch has been activated. I need instructions on how to re-set the flood switch. I have two drawers that are possitioned one above the other and the are both giving the error of the activ ... Dishwashers

Fisher & paykel dishdrawer ds605 f7 fault code. Lid failure. This is the second code (after F9- power controller fault).The lid of the dishdrawer will not raise and release the drawer. The lid is stuck in the down position. Assuming this is a power/electronic controller fault. Part numbers would be good.


You can force open the drawer without causing any damage. The actuators on each side will let you do that. But you push it back in unless you manually move the actuators for which you will have to take the drawer out of its housing.\015\012 ... Fisher and Paykel DS605ZW Dishwasher

Fisher and paykel dishdraw model DD603


P2 is for drain. Make sure there is a bit of water in the base of drawer before you start P2 otherwise the rotor may rub and burn. You can run the diagnostic with drawer open. Be careful not to start P1 as the wash water will splash and flood the dis ... Fisher and Paykel Dishwashers

Kenmore Elite dishwasher won't finish cycle. I have the same model, problem, symptoms, and fault codes as in thread: http://www.fixya.com/support/t7120066-kenmore_elite Model: 630.16303401 Fault code: H The water at the faucet is hot: 120F I pulled the control board and all the solder joints looked good--there were no signs of burnt solder joints, missing solder, cold solder, etc I measured the current on the grey-black wire at less than 1 (one) amp when the t-shoot says it should


Hello\015\012& Welcome to FixYa\015\012\015\012If\015\012the water inlet valve is fine then it can be a shorted wire or the heating\015\012element itself that is bad and needs replacement. Please get back to me if you\0 ... Dishwashers

DISHDRAWER IS SSHOWING FAULT CODE F1. WHAT ARE THE


F1 means the flood switch has been activated. here is a trouble shooting flow chart. 1. did a flood occure? yes. q-2 or no q-122. is the lid sealing on the tub correctly? yes Q-3 no=Answer3. Is there a high water level in the tub. Y ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

I would like to get a user manual for LG dishdrawer model DD603, Australian model. Failling that what I really need to know at present is how to use the lock button - just pressing it doesn't seem to work. I need to be able to stop my toddler starting and stopping the dishwasher at her own whim! The front display has three buttons, 'power', LED display then 'Start/pause', & 'lock'. Thanks Shelley


Opps wrong make & model. Searched for fisher & Paykel and found what I needed! No longer need a solution. ... LG Dishwashers

I have a Kenmore Elite dishwasher (model 665.1315), and the dishwasher will run through the wash cycle as expected, but when it gets to the heated dry cycle , it doesn't appear to dry. It will then flash a fault code 81 (8 short flashes of the 'clean' light, pause, and then 1 more short flash of the 'clean' light, longer pause, and repeat the code). The dishes seem to be somewhat dry, but there is certainly water on the dishes and on the tub (there is never any water standing in the tub, and t


Hi,Check your heating element.. \012A bad heating element causes many problems in dishwashers...Dishwasher Problems The ... Kenmore 24 in. 15932 Built-in Dishwasher

I have a 10 year old dishdraw (Model No DD601v2). It is displaying a fault message "F1" on the top draw display and will not start. What fault is this indicating?


Normally F1 should display in both drawers. \015\012\015\012But this is a bit unsual. Please confirm if you are still able to operate the bottom drawer. ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Fisher and Paykel Dishdrawer-DS605SS F4 fault code


No temperature increase ... Fisher and Paykel DishDrawer DS605FDSM Stainless Steel 23 in Builtin Dishwasher

Fisher& Paykel Double dish drawer dd603 fault code f1, what do we do?! Where is the flood switch?


See also http://www.fixya.com/support/t346941-f1_error_1_draw_dishwasher ... Fisher and Paykel 24 in. DD603H W Built-in Dishwasher

F6 fault code on a hearland dishwasher model # HDWF-CP05 , what is the solution


... Magic Chef Built-In Dishwasher

Whirlpool dishwasher Model ADP8966, fault code 2?


Hi.\015\012\015\012\015\012F2 means Touch Panel Failure - Replace the Touch Panel.\015\012\015\012Try first tripping the circuit breaker and see if this can clea ... Dishwashers

My Fisher Paykel dishwasher is model #DD6051. After about 1 1/2 years, the top drawer is not filling with water. The fault code looks to be U1. The bottom drawer fills and runs fine. Would you have any idea what the issue might be? Thank you very much.


Hi,Unplug the Washer for Few Minutes, say 30 minutes and then Turn it ON. If the problem Persists, then read :-U1 Heavy and Rinse LEDMachine has failed to prime with water within approx. 3 minutesReason ... Fisher and Paykel Dishwashers

I bought a Frigidaire Dishwasher on November 2006. Model #PLD4375RFCO. (I paid K&N Sales $549.00) In October 2008 I called your toll free Number to report Er code was flashing. You recommended Best Service. I called them and the repairman said the"vent was not closing - fault on Drying fan - vent is closed. Sensor bad on assembly." I needed a new drying fan assembly (for $148). With his service fee and labor after he returned to put in the new assembly, the total paid to Best service was $318.25


... Dishwashers

Whirlpool dishwasher I have a whirlpool dishwasher model # 665.16519202, and the clean light flashes 7 times then pauses. I was having a problem with the machine working properly right befor the fault code came up and froze it. Can you give me any guidance as to the problem of this washer? Thanks in advance.


If the dishwasher doesn't sense a water temperature increase, it will stop working and lock the functions (clean light flashes 7 times, all buttons are non responsive).To resolve this you will have to reset the console. Do this by closing ... Whirlpool GU2400XTP Built-in Dishwasher

What does fault code d1 mean on a Maytag dishwasher model MDB7000AWB


Did u do a hard reset? ... Maytag Dishwashers

I have a Fisher & Paykel Model #DD603 double dishwasher it is coming on with a code F1 with a little wrench Whats going on ?


An F1 fault means that the Mains Filter board on the bottom pan has detected water, a leak. There are, unfortunately, a few possibilities of the cause of this. Most likely it is bad lid motors (the motors that lift and pull down the lid to seal ... Fisher and Paykel 23 in. DD-603 Built-in Dishwasher

Top drawer on Fisher Pakal model DD603 B-won't turn off. Keeps scrolling through the numbers. No particular error code. Can't select type of wash or anything else.


I have the same model and the same problem. I just emailed FP and will let you know if they answer. ... Dishwashers

How do i deactivate flood switch on fisher&paykel dishdrawer model dd603


... Fisher and Paykel Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0648 seconds