Having problems with your Fisher and Paykel 23 in. DD-603 Built-in Dishwasher ?

I have a fisher and paykel disher washer i have a f1 on the screen


Answers :

Hi
\015\012\015\012
\015\012Thanks for using FixYa.
F1\015\012error means that the flood switch has been activated. You’ll need to reset it by powering off the\015\012breaker or by unplugging the unit from the power socket and mains for more than\015\012five minutes. Please check that there is no blockage in the drain hose and it\015\012is not raised higher otherwise the water will run back to the dishwasher. Also\015\012perform the following procedure---
\015\012\015\012
    \015\012 \015\012
      \015\012 \015\012
    • Unplug power and\015\012 remove bottom dish drawer
    • \015\012 \015\012
    • Use\015\012 a Sponge and dry all the excess water underneath
    • \015\012 \015\012
    • Remove\015\012 circuit board cover
    • \015\012 \015\012
    • Dry\015\012 all around and underneath as much as possible
    • \015\012 \015\012
    • Apply\015\012 hairdryer for 10-15min
    • \015\012
    \015\012
\015\012\015\012
\015\012\015\012Please do accept the solution if the issue is resolved or\015\012else revert for further assistance.
\015\012\015\012
\015\012\015\012
\015\012\015\012Thanks
\015\012\015\012Rylee
Repair Help & Product Troubleshooting for Fisher and Paykel 23 in. DD-603 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a fisher and paykel disher washer i have a f1 on the screen


Hi\015\012\015\012\015\012Thanks for using FixYa. F1\015\012error means that the flood switch has been activated. You’ll need to reset it by poweri ... Fisher and Paykel 23 in. DD-603 Built-in Dishwasher

Fisher and paykel dish washer keeps running - Fisher and Paykel Dishwashers


It will help to come up with a cause and solution if you can please specify the model number of the dishwasher.\015\012\015\012Also please confirm if you hear the pump motor start during the cycle. How do you stop the dishwasher. Is there wat ... Fisher and Paykel Dishwashers

F1 code on fisher and paykel dish washer


... Dishwashers

Fisher & Paykel DD603 Disher Drawer Service Manual


You can get fisher paykel service manuals here:http://fisherpaykelparts.net/index.php ... Fisher and Paykel 24 in. DD603H W Built-in Dishwasher

We have F1 light appearing and cannot remove change or proceed can you assist on the fisher &paykel dish washer 918td


Hi,I am Sorry to hear regarding this Error. But, i am afraid that you need to call a technician as this Error refers to Faulty Control Board. It has to be replaced. You could try to Press Cancel / Clear buttons, if any to che ... Fisher Dishwashers

F1 error message on Fisher and Paykel DD603. I don't see any water underneath. The kitchen sink drain seems to be working OK but I have not checked the hoses from the disher to the drain. Thanks, Dave


... Fisher and Paykel Dishwashers

Fisher paykel dishwasher dd601I runs complete normal cycle and finishes normally. 2-3 sec. after completion the washer motor srarts to run and the f1 fault (flood sw. activated) is dislayed. When the power button is pushed the fault spontaneously disappears and the motor stops. no moisture is in thre bottom under the tub and the normal cycle can be ru again with the same results.


Hi\015\012\015\012F1 code indicates an overfill condition which may cause when dishwasher can’t pump out dirty water due to a plugged drain hose.\015\012open dishwasher fully ,dry up as much water as possible the ... Dishwashers

I have bought a fisher and paykel model DW60CSX1 second hand... i have connected all the relevant pipes and taps, the washer gets to a point in the cycle where it stops and thw 1st, 2nd and 4th lights flash and beep.. i cant find a users manual anywhere...


My manual says that this means the drain hose is crimped or bent, or the drain hose is too high. In other words, the drain can't drain for some reason. ... Fisher Dishwashers

Wont drain the water in my fisher and paykel 2 drawer dish washer but only in the top unit as it was used a lot more than the bottom one. i suspect it is the pump - any ideas and how hard is it to replace?


Hello- Try swapping rotor - the blue bladed thing at bottom of drawer - from top to bottom. If it works, then replace with new part. Let me know if this info helps- have more if needed. Thanks- Ed ... Dishwashers

F1 coming up on screen - Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher


You must be having F1 code flashing on door display of one of the drawers of your dishwasher.\015\012\015\012This means the flood switch has been activated. Check if there is water inside the dishwasher (turn power off at the mains suppl ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

I have a Fisher and Paykel dishdrawer model ds603. Not sure eactly what happened but my son says that the cycle stopped last evening (and only tells me this morning!). Dishes though appeared to be clean and there was a small amount of water at the bottom. I tried opeing the washer and it was hard to open as though the drawer was stuck on something. I removed the drawer and checked the rollers and they are fine. I realised then that the drawer is getting stuck on the inside lid that provides the


The best thing to do is to remove the rack,drawer completly,and close it up,see if it will come on,and run all threw the cycle.If it does,then put the rack,drawer on the track.The rollers could be,well,not snapped all the way on.It will be in that ar ... Fisher Dishwashers

My Fisher and paykel dishwasher drawers are showing a F1 fault on the top drawer screen, But it was the bottom drawer that was in use at the time of the fault occured. The top drawer will open but the bottom drawer is locked. I need to unlock this drawer to get my cooking equpiment out. Please Help. I know that the F1 fault is a flood fault but how do fix it.


... Fisher and Paykel Dishwashers

The machine is a fisher & paykel nautilus, its making a beeping noise the only way to stop it is to switch it off at the power point and in the little screen it has F1 not sure what that means


You may have to check the micro switch for the door if it is working properly. Check if the wiring has been removed or if yours is the mechanical type, check if the lever needs aligning or straitening. ... Fisher and Paykel Dishwashers

I GET WIERD LED LIGHT PATTERN IN ONE OF THE WASHERS of my fisher paykel dishdrawers


Dgrg ... Fisher and Paykel 23 in. DD-603 Built-in Dishwasher

Fisher and Paykel 23 top washer isn't coming on


Is the lock symbol showing in the lcd badge when it's not back lit can be hard to see ,if it,s showing push lock button till it beeps release immediatly now try power button or start/pause button ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Dishwasher Dilema Hi, Can someone help me solve this problem. Last time I had a problem with my dishwashers I was pretty successful in solving it on this site. I was running a reg wash on the top drawer of my Fisher&Paykel when I suddendly had to stop it in the middle of a wash to add more dishes (something I do all the time) suddenly both screens started beeping with an F1 along with a wrench. It sounds like both motors top and bottom are running full blast. I tried shutting the power for a few


You need to remove the bottom drawer and dry out the water with towels and a hair dryer when this is done it should operate normally. most likely when you pulled out the drawer the water sloshed back and out of the drawer making the dishdrawer think ... Fisher and Paykel 24 in. DD603H W Built-in Dishwasher

Fisher and paykel dish washer ..soft touch.. will not work when switched on --comes up with a f/1 and will not startup


Called in a dish washer guy to fix it .. ... Dishwashers

F2 code on fisher and paykel dish washer


Http://fisherpaykelparts.net/index.php?categoryid=115&productid ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

U 3 on screen - Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher


U3 means the unit failed to drain. check the motor rotor under the spray arm and look for a drain blockage. try swapping the motor rotor from the other drawer to see if this is the fault. if not try swapping the main PCB boards (Mtr Controller modul ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Have Fisher&Paykel model DD603. Top washer will not close. Partial water in unit. Will not turn on . Is there a service tech in 13815 area?


Hi,Yes,Here are the details:(231)242-1190\015\012\011\011www.ikenfixit.com ... Fisher and Paykel Dishwashers

Have Fisher and Paykel dishwasher dd602 the main power screen does not light up but the inside panel lights all do. Please help. Debbie


Swap over the display from the other drawer and see if it works cheers ... Fisher and Paykel 24 in. DD-602 Built-in Dishwasher

Help with and f4 fault code on a fisher and paykel disher


Without the model number I have to guess.\015\012Fault code 'f4' means "faulty temperature sensor or element".\015\012\015\012Here is a link to User manuals:\015\012\015\012 ... Fisher Dishwashers

F2 Code Hey, I have a single drawer built in Fisher & Paykel dish drawer and today I pulled the spray arm, filter and large metal screen out to clean them as we have been starting to get a bit of stuff left behind after washing lately. That was all good After putting it all back in though I went to use the dishwasher and it stopped and came up with an F2 fault, I thought I may not have put the bits back in properly so pulled them out again and noticed that on the rotor that connects the motor to


Fault F2 means the rotor is not rotating. If you say some of the vanes have broken off, they could have been jamming it. This should spin freely with minimal force when installed correctly. If you removed the rotor itself, you do ned to take care whe ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

My top drawer of my Fisher and Paykel dish washer wont close tight. It seemed to be jammed and not closing unless it was pushed closed hard and then it jumped a bit now wont close tight and has no resistance at all. If I hold it closed and start it it will run but I think the lids not closing tight?


Make sure the unit is level. Remove drawer. On the inside of the cabnet there are the drawer runners on iether side. Behind these there are a pair catches. If one or both of these are latched back when they shouldn't be, ie. when the drawer is open, ... Fisher and Paykel 24 in. DS-603 Built-in Dishwasher

I have a single draw Fisher and Paykel dishwasher. I stupidly put washing up liquid in the dishwasher which resulted in a F1 problem. Water started leaking under the draw and onto my floor. I turned the dishwasher off at the power point and have cleaned up the leak. Have I damaged my dish washer? How do I fix it?


Ok , F1 means your flood switch has activated, which is underneath the drawer. now they show the F1 fault because of 2 reasons.1st there is still water underneath drawer causing switch to activate. 2nd your activator board which has the flood switch ... Fisher and Paykel 23 in. DD-603 Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0884 seconds