Having problems with your Fisher and Paykel 23 in. DD-603 Built-in Dishwasher ?

Flood switch activated, intermittent beeping, motor will not turn off


Answers :

Please confirm if it is a single or a double drawer.
\015\012
\015\012How do you know the flood switch is activated? Do you have a display on your dishwasher and what is it showing? If no display then which lights if any on the panel are on?
\015\012
\015\012Motor will not run if flood switch is activated in the fisher paykel drawer dishwwasher.
Repair Help & Product Troubleshooting for Fisher and Paykel 23 in. DD-603 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Flood switch activated, intermittent beeping, motor will not turn off


Please confirm if it is a single or a double drawer. \015\012\015\012How do you know the flood switch is activated? Do you have a display on your dishwasher and what is it showing? If no display then which lights if any on the panel are o ... Fisher and Paykel 23 in. DD-603 Built-in Dishwasher

I recently had the e4 error code on my new world dw60 dishwasher. I have since opened it up and replaced the heater element, which appears to have resolved that issue. However, in the process of doing this I incorrectly installed the flood switch back into place, meaning that it was in its closed position (i.e. the position it would be when activated by a flooded base) when I went to turn the dishwasher back on. I have since opened it back up and correctly installed the flood switch, but I ca


... Stoves 27 in. DW60 Built-in Dishwasher

My dishwasher is beeping 5 times with a pause in between, I can't get it to do anything now, each time I switch it on it just beeps at me. In the manual it says that the 'flood switch' has been activated, I' not sure why, or even what this is, but I'd really like to deactivate it.


It would help to know the make and model number of the dishwasher.\015\012\015\012Flood switch can be at different locations depending on the model.\015\012Are there any lights flashing on the panel as well? ... Dishwashers

DS605 has had flood switch activated, how do i turn it off


Well ds is a single drawer if you look at the drawer from the front you well see on the side of the drawer a push in clip push in and gentaly pull slowly towards you then you have accses to the botton clear the water then put together hope this helps ... Dishwashers

Dishwasher beeps constantly and gives fault code that the flood switch has been activated. Neither drawer will trun off. It seems the fan keeps going, and is very noisy. It worked fine last night.


Hello there:here is some ideas that will help you clean off the flood switch thatis causing the error first unplug the power going to the machine If you by accident overloaded the top drawer\015\012and this will allow water to ... Fisher and Paykel 23 in. DD-603 Built-in Dishwasher

I am getting a flood switch activation code on my Kitchenaid kudd01dppa. The pump on the top and bottom drawer keeps running and they continuously beep with the rinse light on.


... Dishwashers

Hello there during normal operation, our F&P DW60 started beeping and displaying E6 which the manual says means that the flood switch is activated. How can we fix it? thanks Cath


Hi,Pull the appliance out, tip it back about 45 degrees and see if water runs out of the base.If it does, drain the base (under where the tub) completely and the anti flood should reset.If there is an aqua stop dev ... Fisher Dishwashers

Fisher-Paykel DD603 DishDrawer shows F1 fault code. The Flood Switch has been activated. I need instructions on how to re-set the flood switch. I have two drawers that are possitioned one above the other and the are both giving the error of the activated flood switch. Any advice or instruction is greatly appreciated.


Fisher-Paykel DD603 DishDrawer shows F1 fault code. The Flood Switch has been activated. I need instructions on how to re-set the flood switch. I have two drawers that are possitioned one above the other and the are both giving the error of the activ ... Dishwashers

Kitchen aid KUDD01DP dishwasher flood switch activated


... KitchenAid 23 in. KUDD01DPPA Stainless Steel Dishwasher

Flood switch activated on dishwasher DW60CSWI


Please clarify the model number. i am assuming you have a standard height single door dishwasher. It is likely the flood switch assembly itself is faulty and giving false results. Check the base of the dishwasher - item 95 in on page 10 in ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Bosch shu8806 Hello, I aquired a shu8806 recently and it doesn't work. It has power and water. I push wash cycle, indicator light comes on, shut door and nothing happens.  So the door switch seemed like a good place to start. Since I am an electrician I thought I would give it a shot. When plugged in, the wire from the motor is 120V but when jumpered to the neutral(common on the door switch), motor doesn't operate. Although, I have heard the motor turn over momentarialy when trying to run unit e


The pump may be clogged, or the motor start capacitor may be bad or some units have a fill switch wired inline with the motor so it won't start unless the unit is full ... Bosch 23 in. SHU 8805 Built-in Dishwasher

I have a AEG OKO_ FAVORIT 4040 dishwasher which has had very little use despite its age. The problem is that the switch that detects an over-fill is activated all the time and the pump continues to try and empty an already empty dishwasher even when the main switch is turned off, the only way to stop this is to turn it off at the power point I have had some sucess deactivating this switch by tilting the dishwasher forwards however because of the angle it sometimes overflows when filling. The ma


Hi there,This could be a problem on the control board of the unit. It could be faulty and need replacement or you may try to access the board and try to clean it.Make sure upon doing this all electrical connection to the unit ... Dishwashers

My Maytag dishwasher (DWU7400BAE)does not turn on. The latch micro-switches work; replaced the timer switch, still doesn't work; makes no sound of any kind when timer switch is turned. Could this be a relay problem, or is there a solenoid that activates the water flow?


... Maytag Dishwashers

I had a flood in my kitchen and the float switch activated


When you drained it, did you check the sump area for debris? There is a good chance that something is causing the pump to be obstructed. Please remove any covers that are on the sump and stick you hand down there to see what is loose., Another tip wi ... Hotpoint 24 in. FDW60 Free-standing Dishwasher

I have a KitchenAid Drawer Dishwasher, Model KUDD01DP and according to the Error Codes the flood switch has been activated. There is not any water in the machine and the filters and other components are clean. How can I deactivate the flood switch? Thank you.


Dry out the base of the unit. ... KitchenAid 23 in. KUDD01DPPA Stainless Steel Dishwasher

When I press the start/resume control, the dish washer start/resume light blinks 2 to 3 times, then turns-off. then the dish washer beeps several times; however, the dish washer does not start. when turned the breaker switch off and on, and then I press the start/resume control, the dish washer go through a normal wash cycle. The next day when I press the start/resume control, the same thing happens. 2 to 3 blinking lights followed by beeping for several seconds. Dish washer does not start


... KitchenAid KUDC10IXSS Builtin Dishwasher

Flood switch This DW is a Kitchen Aid version of a Fisher & Paykel. Both drawer rinse lights stay on, the drain pump stays on. Book says the flood switch is activated. Is this somthing that a homeowner can fix or am I required to call for service?


I had the same problem and I fixed mine. It wasn't hard at all. First, make sure power is off either unplug or shut off breaker. Next, open the lower drawer and on the sides toward the bottom you will see a circular recessed pin with a flat slot. Wit ... KitchenAid 23 in. KUDD01DPPA Stainless Steel Dishwasher

My question is this: once the flood activation switch (F1 error code) has been activated due to water in the tray, will the switch self-set once the lower board area has dried sufficiently, or does it require a board replacement? I have found (I think), and will be correcting the leak, but wanted to make sure the water sensor is healthy or not.


Hi\015\012\015\012\015\012Thanks for using FixYa. You are right, F1\015\012error means that the flood switch has been activated. You’ll need to res ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Kenmore dishwasher 587.15163401 won't fill. I checked the float switch with my multimeter and it's working properly. It's registering zero when I touch the terminals and 1 when I activate the switch. On this particular washer, how do I access the water inlet valve to check it for debris and also to check the solenoids? Also on this particular washer, how do I access the drain valve and solenoid. Can you tell me if this is a single direction motor or reversing motor. As I understand


The problem was the water fill valve. When set to Ohms, the multimeter never would read zero indicating a problem with the water fill valve. I replaced the part and it works now. Be sure to turn your water off under the sink before taking it off t ... Dishwashers

The flood switch has been activated on my dishwasher


... Fisher and Paykel 23 in. DD-603 Built-in Dishwasher

I have a Craftsman power washer model 580 752020. When I start it up, turn on the switch the electric motor runs fine until I either close the trigger to the spray nozzle or press the trigger for power spray. The electric motor just shuts down, if I take my finger off the pressure and let the water run with no presssure the motor runs fine. My question is this. Is the capasitator on the electric motor the probable cause and is there a way to check out the capasitator to see if it is malfuncti


I doubt that it has anything to do with the capacitor on the motor. i think you are having a problem with the actual Motor Drive circuitry. What is happening is when you close the switch, this tells the Motor to "Ramp Up" to pump the water out, what ... Craftsman Pressure Washers

Cannot turn my fisher and paykel dishwasher off..keeps beeping and motors are running in both draws. I have taken the bottom draw out and it is dry.. I can only turn it off if I turn the house mains off (then everything else is off!!)


I am assuming you infer that the bottom of the dishwasher is dry when you took the bottom drawer out. This means the floodswitch located on the power filter board at the bottom of dishwasher might be faulty. Do you get any Fault code on the display. ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

I conected the hose turned on the water switched it on the motor started then just went off nothing is happening it just stopped


I fixed mine works good easy too watch my video step by step i put it on youtube ... Karcher K2120

Hi i have a karcher hds 745 and when i turn the switch on the motor runs all the time and dose not stop


... Karcher Pressure Washers

The flood switch has been activated on my dishwasher


Remove the bottom drawer by pressing in the tabs on either side of the drawer (bottom edge towards the front).\015\012\015\012Dry out the compartment with towels and let air dry. ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1124 seconds