Having problems with your Fisher and Paykel 23 in. DD-603 Built-in Dishwasher ?

DD603 Double drawer dishwasher: How do you take the clear coverplate completely off the top drawer in order to replace the motor? I can't figure out how to remove the part that attaches to the front of the drawer.


Answers :

I am assuming you are fully conversant with the unit and have taken out the drawer from housing rail.
\015\012
\015\012To get the wiring cover off you then have to..
\015\012

Carefully release the four wiring cover clips from the front
\015\012

lower section of the tub taking care not to damage them.
\015\012

Release the three clips on the underside of the tub which
\015\012

retain the wiring cover.
\015\012

Pull the tub fully open and lift it up at the front (this makes it
\015\012

easier to remove the wiring cover from the rear of the tub).
\015\012

The wiring cover may now be carefully moved forward to
\015\012

release it from the rear of the tub.
\015\012

To reassemble first ensure that the wiring harnesses, drain
\015\012

hose and fill hose are clipped into their correct position.
\015\012Then refit in reverse manner
\015\012
\015\012
\015\012Hope this helps.

Repair Help & Product Troubleshooting for Fisher and Paykel 23 in. DD-603 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

DD603 Double drawer dishwasher: How do you take the clear coverplate completely off the top drawer in order to replace the motor? I can't figure out how to remove the part that attaches to the front of the drawer.


I am assuming you are fully conversant with the unit and have taken out the drawer from housing rail.\015\012\015\012To get the wiring cover off you then have to..\015\012Carefully release the four wiring cover clips from the fro ... Fisher and Paykel 23 in. DD-603 Built-in Dishwasher

Just looking for some advice on removing the drawer from my servis washing machine, sorry I dont know what model it is. I need to clean the powder drawer but cant find any way to remove it from the machine. There is no internal part marked push that i can see and im wondering if i need to unscrew the four screws around the drawer. Help please! Cheers


Send an email to this address asking for the user guide for your model \015\012\015\[email protected] ... Servis Dishwashers

I have a KitchenAid but model # KUDI24SEWH1. Can not find it on your list although another model without the last letters 'WH1' is on it. Anyway, my nephew ordered the parts he said needed to be replaced. One was the top water feed tube and bearing which he had no problem replacing when the part came in. But, he is having a very difficult time opening up the front door to replace the soap dispenser. Removed the 6 screw (three on each side) and the two at the top of the door but that is as far


You don't Use the WH2 just the first 6 letters and numbers.\015\012Jim ... KitchenAid KUDI24SE Built-in Dishwasher

Ice maker cannot eject cubes. I took off the front cover and found several contact points for checking the motor, water valve, thermostat, mold heater. There is also a line voltage and neutral contact. Are these contacts live only during certain parts of the cycle? I suspect the heater isnt working to loosen the cubes so they cant be ejected. The motor sounds lilke its running but the ejector is not moving nor is the Gear on the front of the unit. Can someone give me a full description of this t


I usually replace icemakers as a unit. It sounds like the mold heater is out. The system cycles like this: Fill, freeze, mold heat, eject, and start over. The mold heater not working will prevent ejection. ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

I am trying to clear the drain on my ge portable dishwasher. I have removed the 2 screws for the drain cover but my dishwasher has another part on top attached to the spray arm that is holding my cover on . I can not figure out how to remove this part. the model # is gsc5511pooww


... GE Dishwashers

I have a Maytag MDB7100AWW dishwasher that makes a lot of noise from the motor at the end of the drain cycle. When there is water in the dishwasher it doesn't make any noise and washes well. This url (http://www.applianceaid.com/maytag-dish-noise.html) describes my problem exactly but I can't remove this part. I have unscrewed the 3 screws keeping it in place but it seems to be still attached to the motor. How can I remove it?


... Maytag MDB7100AWB Dishwasher

Our whirlpool estate diswasher will not drain the water after a wash cycle. I have removed internal parts down to the drain and cleared the path. Moreover, I have removed the drain tube and clean it. Still water will not drain. I assume it is the pump. Can the pump motor be easily replaced? Thank you, Jim


You hve to find the right pump first ... Whirlpool Dishwashers

Need to replace the latch assembly on Maytag dishwasher model # MDB5600AWW. How do I gain access to the area where I need to replace the part? I removed the 5 screws at the top, but can't seem to get the upper front panel off. I'm afraid of pulling on it to hard.


Remove all the screws on the inner door panel and lift it up it will be easyer ... Dishwashers

My KUDD01DPPA KITCHEN AID DISHWASHER BOTH TOP AND BOTTOM DRAWERS have red lights on in the front and the pumps keep pumping . Is there a flood switch that needs replacing? im a plumber by trade. So im very capable of replacing any of the parts.


... KitchenAid 23 in. KUDD01DPPA Stainless Steel Dishwasher

DD603I I AM REMODELING MY KITCHEN AND NEED TO REMOVE AND REPLACE THE CUSTOM DRAWER FRONTS. hOW CAN i REMOVE THEM?


There is a round pin on wither side of drawer front, when ithe drawer is opened, witha pair of needle nose pliers grab and remove both of them, the drawer front then will slide down and away. ... Fisher and Paykel 24 in. DD603H W Built-in Dishwasher

Telmann Dishwasher TEL 12DWM. Dishwasher started to make weird wooshing start-stopping sounds at the beginning of the wash cycle so I stopped it. Since then the lights are on but wont go regardless of where the switch is set to. Have pulled the pump off and the inlet pipes and blown to remove any blockage but still no luck. Cant get into the water jet part due to connectors that require specfic tools to remove and replace. Any thoughts?? thanks in advance, Michael


... Dishwashers

I have an ASKO 1605 Diswasher I am trying to replace the top front panel on the door I cant remove the control dial on the front how does it come off


... Dishwashers

GE Potscrubber 650 Dishwasher, 13 years old. We want to take the front lower panel off to move the motor fan by hand, as you described for glideston'es post, but we can't figure out how to get the panel off. A repairman told us to remove the three screws at the top of the lower panel -- but they are too close to the upper door panel. The space between the two panels is not big enough to fit a screwdriver or any other tool we can think of. How do we remove the lower panel?


Homeowner with this model:\012I believe you would need to take the door loose by removing the screw on each side of the door near the bottom on the outside. \012\012I would recommend removing the unit whole instead. That way you don't n ... GE Dishwashers

Drain Clogged Drain is clogged. Have standing water. I removed the 6 screws holding the top part of the strainer/drain motor on the bottom, but can't figure out what to do next to get to the drain to remove the clog


The strainer should have trapped all the big particles. Are you sure the drain is clogged? More than likely the evac. pump is shot. ... Kenmore 24 in. 17602 / 17604 / 17609 Built-in Dishwasher

I have a three year old Whirlpool Dishwasher DU1148XTP which is making a load flickering noise when it release the soap during the wash cycle. I removed the front panel and looks like it small solinoid that had a part number 91127.00.1404504 120V 60Hz making all the racket. So my question is could it be as simple as just replacing this part or is there more to this problem?


Yes due to voltage fluctuation you need to change the fuse..... ... Whirlpool 24 in. DU1148XTP Built-in Dishwasher

Whirlpool dishwasher...Model 3385820, type #575-0..built-in...front panel has a dent..can a person remove and turn the panel around...suggestions on how to remove the dent or replacement part?


You can change that front panel, its not hard, personally i went to my local dump and took one off an old washer lol ... Whirlpool Dishwashers

Motor problems? I have a fisher paykel DS6031SS -top drawer dishwasher that the motor makes a loud sound when cycle first starts. Sound seems to be coming from the front of the dishwasher. It is 7 years old. Anyone else have this problem? I llive in a small town in Washington state (Lacey) and have been told the closest place to get parts is Seattle! Thanks.


... Fisher and Paykel DS603SS Stainless Steel Built-in Dishwasher

Need to replace electronic control module how do we remove front panel of our single dish drawer


... Fisher and Paykel 23 in. DD-603 Built-in Dishwasher

Water leaking from bottom of door. Is there a gasket I can replace? I cant seem to figure it out. Also a link to a parts manual Thanks Dennis


Check under door, should feel a rubber gasket. sometimes it gets pushed up by silverware. on each side of the door you'll see a small bit of plastic from the gasket, give that a push down and close the door, should fix your problem. ... Dishwashers

Have a lg model lds 5811st model dish washer for a little over 2 years and had the le error button .called technican replaced the motor now 4 weeks later the same error button.and the cancel button wont release the water standing in the bottom.also cant get repair man to garanty his work or parts.


Take off the door cover and you will find the wires melted into a black blown in insulation. Carefully free the wires and run a quick check to see if any of the wires are broken. If they are cut them and splice them back together. It takes a while ... LG LDF6810 Built-in Dishwasher

DS603 Fisher & Paykel U1 error code ..(see our previous errors we've listed) we have now pulled out the yellow water valve that goes up behind the front panel and at the other end by removing the drawer and plastic protector thingy - we checked that there were no bedris or calcium buildup in the valves ends and filters and replaced it all. So we put it all back to gether as we could not see what would cause this error, only to find that it worked - water came into the machine but about 4 mins in


This product is total ****.\015\012Pull it out, call whoever sold the **** to you\015\012and tell the to come get it and shove it up their ***.\015\012Then buy a Bosch and live a happy life.\015\012The design is moronic. The machine is like the old\ ... Fisher and Paykel 23 in. DS603H W Built-in Dishwasher

I need to replace the lifter in my dishwasher. I have the new part, but darned if I can figure out how it's attached to the pumphousing. I just need a diagram to show it connects to the drain valve lever and then to the pump housing. Maytag PDB2430AWE.


... Dishwashers

I am trying to replace the front panel on my beko dishwasher but cant remove dial?


Remove the 3 screws along each side of the door (frame). if you open the door and look on the inside at the top you should see same cross head screws undo these and the panel on the front should come free. now remove front off dial by jus ... Dishwashers

I removed the panal on the right side as you are facing the front of the machine. there is a float unit on that side near the bottom that water goes thru, it has two electric plugs that also attach to it. this unit is leaking - what is it called, what's the part number, & where can i buy it


I believe the part you're refering to is the float container; here's a copy of the owners manual:\015\012\015\012http://www ... Equator 23 in. WB72 / BB72 Built-in Dishwasher

I have a maytag dishwasher mdb5600awb. it is about 5 years old. it does not clean anything on the top shelf for the most part. i took everything apart and found nothing that was clogged. we tried a rinse agent and that didnt help. for 460 dollars i expected more out of this. i also had the motor replaced 3 years ago. can someone give me an idea why i cant get my dishwasher to wash dishes?


Replace the dock at the back if it is missing a piece. That solved my problem with the top rack not getting clean. ... Maytag 24 in. MDB5600A Jetclean II Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1293 seconds