Having problems with your Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher ?

U 3 on screen - Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher


Answers :

U3 means the unit failed to drain. check the motor rotor under the spray arm and look for a drain blockage. try swapping the motor rotor from the other drawer to see if this is the fault. if not try swapping the main PCB boards (Mtr Controller module). cheers
Repair Help & Product Troubleshooting for Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

U 3 on screen - Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher


U3 means the unit failed to drain. check the motor rotor under the spray arm and look for a drain blockage. try swapping the motor rotor from the other drawer to see if this is the fault. if not try swapping the main PCB boards (Mtr Controller modul ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

F2 error on bottom draw screen - Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher


... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

F1 coming up on screen - Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher


You must be having F1 code flashing on door display of one of the drawers of your dishwasher.\015\012\015\012This means the flood switch has been activated. Check if there is water inside the dishwasher (turn power off at the mains suppl ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Fisher paykel dishwasher not draining well - Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher


Check the drain hoses by removing the dishdrawers from the machine and pulling on the hoses. I installed a Fisher Paykel DD602 about a month ago and the bottom drawer was not draining. I removed the drawer and freed up the drain hose and the machine ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

How do you remove a fisher paykel dishwasher - Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher


If you are just going to fix it you dont need to remove the hole thing WARRING UNPLUG THIS THING B 4 YOU EVEN TAKE OUT ANYTHING ON IT there is power to stuff even when it's off what problem r u having ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Fisher and Paykel Error code Ho - Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher


... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Fisher and paykel diswasher f1 fault code - Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher


F1 fault code means the flood switch is activated. There is moisture at th e base of your dishwasher.\015\012 ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Fisher and Paykel Dishdrawer pausing - Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher


... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Fisher paykel dishdrawer f2 with wrench - Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher


... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Fisher and paykel different models - Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher


Please clarify the problem you have with your dishwasher so that I can try and find a solution for you. Fisher and Paykel make a range of dishwashers in particular the drawer units which are very popular and convenient. ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

F4 fault on fisher paykal dish drawer - Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher


F4 fault would inidicate the temperature sensor that senses the water temperature is faulty or the heating element is not working.\015\012\015\012Looks like you will need a technician to visit and have a look. ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Dishwasher leaking when emptying - Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher


... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Dishwasher top one gets f1 what to do - Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher


Means u got small leak could also be due to plates or stacked up to high or cupps just mm over the edge so when starting wont seal well a nuff and get wet on the bottom and flood swich comes on turn it of for few days then unlaod stack them just on l ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Dishwasher keeps flashing F1 - Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher


F1 on your dishwasher is the fault code for leaking inside the machine. the water has caused the flood switch to activate. have you put any detergent rather than your normal dishwasher detergent into the machine? if you have, the water probably leake ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Haus dishwasher not draining - Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher


... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

How to reset a fisher paykal - Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher


THere is no specific instruction for reset of the dishdrawer.Once you turn the mains power off and back on there is not much you can do. The problems using occur if there is a faulty sensor which tells the diswasher controller not to proceed. You ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Dishwasher overloaded - Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher


Not clear what the problem is. Did the circuit breaker on your mains trip?\015\012\015\012Or have you lost power to one of the 2 drawers? ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Need rack for he dishwasher double drawer Fisher & paykel DD 603SS Built in dishwasher


Check out what you need from this site. ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Whar does f1 error mean - Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher


The flood switch at the base of the dishwasher cabinet has activated. This occurs if moisture has leaked into the base of the dishwasher.\015\012There are several posts on the fixya.com site on causes and solutions.\015\012\015\012I ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Remove front panel - Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher


Pull the tube out.\015\012At the bottom both side, use a long nose pliers to pull the plastic plugs out.\015\012Hold the bottom panel, pull to the front and down. Don't pull all the way since there is a ground wire clip on the back of the panel. It n ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

F1 fault code flashing - Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher


Inlet hose to inlet valve connection looseInlet valve body leakDamage to the fill or drain hosesHeater plate damage (chipped enamel)Seals/O Rings (pinched, contaminated or poor join)Dispenser (seal, diverter valve or wel ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

The controls don't work - Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher


Is that on one drawer or both? ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

No power to top draw? - Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher


No power to the top drawer needs to be verified.Are you saying the lights are blank and when you press the start buttion nothing happens?One reason the controller can shut the power is that the heater overload protection therm ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

F1 flashing on and off on both sections - Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher


F1 flashing means the flood switch is activated. This is located at the base of the housing under the bottom drawer. YOu will have to find if there is water collected at the base by extending out the bottom drawer. Make sure the power is turned off. ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

How to remove front panel for dd602 - Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher


2 pins either side of the drawer , need long nose pliers to pull out ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2113 seconds