Having problems with your Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher ?
Top draw 'locked' no power
\015 The top draw of my dish washer has 'locked' with a load of hopefully clean dishes inside. It has been 'locked for some 6 months and I have no idea how to free the mechanism. I have tried turning the electricity off and on. Prior to it seizing it was very tempramental. Has anyone out there got any idea about how I can solve this problem without calling an engineer? The bottom dishdraw is working OK. I do not want to force the draw open .\015
Try holding the power & start button down at the same time for about a minute ,if that doesnt work it must be the wiring. if it does work push the power button a few times til it goes back to the wash cycle time.
Repair Help & Product Troubleshooting for Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Top draw 'locked' no power
Try holding the power & start button down at the same time for about a minute ,if that doesnt work it must be the wiring. if it does work push the power button a few times til it goes back to the wash cycle time. ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher
Power is on, lock symbol appears in display panel of both upper & lower draws. On pressing lock button on either draw you hear a click however their is nothing else showing in the display panels & there is no response when pressing the power buttons or any of the other buttons. Every thing is completely dead. Is their a fuse or overload button?
Hi \015\012If the key/ lock symbol is showing in the display, then it is possible you have the child lock on. Disable it by pressing the key/ lock button on the panel. Press and hold the "Lock" icon again until o ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher
Blockage (i think) top draw - seal orginally locking draw
After you remove the rack you can also remove the large stainless cover( it unscrews, and then under that id the rotor assy , it also unscrews, giving you access to the ports that would be blocked if any, you can refer to your manual for ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher
My DD603 has been working perfectly well until recently when the top draw stopped working as though the power had been removed. I have checked akk connections which appear OK, but I understand there is a problem with the top draw in that the thermistor goes. I would welcome your experienced help and advice as I understand one cannot just replace the thermistor.
Hi just read your posting.Now there are a couple of reasons that the draw does not power up.The first is the element to heat the water is open circuit,The second the control board is faulty or your wiring is faulty.The last is your lid activator boar ... Fisher and Paykel 23 in. DD-603 Built-in Dishwasher
No power to top drawer, lock onrnPower to bottom
Yes it sounds like your circuit board is bad from what you have explained. ... Fisher and Paykel DD605HSS 23 in. Built-in Dishwasher
Top draw has no power
Sounds like the actuator motors are stuck in the open position you can take a putty knike and try to pull the top down manually what is your email I can send you the service guide for the unit ... Fisher and Paykel 24 in. DD603H W Built-in Dishwasher
I have a Honda xr2600 power washer. When I tried using it, water was squirting from the top of the gun. I took it apart to find that there are o-rings on top of some kind of washer---looks like a lock washer but it's made of cardboard??? Two of these washers were broken. I can get the o-rings but I can't seem to find the washers. I tried getting the manual for this model on line with no luck. Any assistance will be greatly appreciated.
The washers that you describe are made of teflon and are split to facilitate installation and/or allow expansion as they wear. These washers are actually seals and at times are used together with orings to seal high pressure. You should ... Honda Pressure Washers
Had a power cut today,top draw does not power up
I am assuming you lost power to the house while the dishwasher was running. The power is back but ou are not able to start the top drawer. Is that correct?\015\012\015\012Was the top drawer operating at the time the power went off? Are yo ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher
Top Draw locked in out position?
Sounds like the lid activators havent released. could be the lid activators are faulty or your lid activator control board is faulty.is it a single or double draw? please reply if u need more help to fix the problem ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher
Top draw will not open and is showing that it has electronic failure (f9) this happened after power went off during wash cycle Model DD605
... Fisher and Paykel DD605FD Stainless Steel Built-in Dishwasher
The Fisher Peykel dual drawer dishwasher : the top unit LED is off and the setting for length of wash is not lit up and is not functioning. There is power to unit because when I hit the lock button it beeps. Also the red light for the glass cleaning liquid compartment is lit. What seems to be the solution? I am an ME and hands on type, please advise.
Can you see a small lock inside the display panel??? the control may be locked. another issue might be a broken heater plate, not a very home owner freindly part to change( heater plate has a fuse inline that would kill power to function ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher
HI I have a 2 drawer F&P unit. the bottom draw works perfect, the top has not power and no display at all. Please help, Cheers.
Hello,Here is a video that explains how to take the drawer out. ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher
No power in top draw of fisher paykel dishwasher
... Fisher and Paykel 23 in. DD603H SS Free-standing Dishwasher
No power to top draw? - Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher
No power to the top drawer needs to be verified.Are you saying the lights are blank and when you press the start buttion nothing happens?One reason the controller can shut the power is that the heater overload protection therm ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher
NO POWER TO TOP DRAW - Fisher and Paykel Dishwashers
Not sure which model you have but if top drawer in double drawer has no power then it could mean a few things - either the thermal cutoff sensor has blown or the power board at the base of the dishwasher (under bottom drawer has blown). If you are no ... Fisher and Paykel Dishwashers
The power on the top draw doesnt come on - Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher
Most likely the thermal fuse has blown which shuts of the control power.\015\012You will need to replace the heater assembly at the base of the drawer as the thermal cutoff is integrated with it.\015\012The parts are listed in this docume ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher
Lock Control I don't have a manual for my dishwasher. The Lock button is on (top of dishwasher). I have pushed that top button for 3 seconds. The button on the top and the "L" then both blink. The button on the top then stays on and the "L" light goes off. Since I can't get the lock light to go off - - my dishwasher won't tun on. Thank you very much.
First try unplugging the washer from powerpoint for 30secs..this may disable lock.if not, some washers will still work on lock if you hold the buttons you need. for 5seconds. eg try starting washer as normal but hold the button for 5secs....(Ps you m ... Jenn-Air 24 in. JDB1050AW Free-standing Dishwasher
Top drawer stuck, gaskets rubbing, no power to controls
I see the question is posted in the DD603 section, so I am not sure if\015\012I am giving the proper advice. Are you sure this is a 602/601 series? A DD603 model has lid actuator motors, not the inflatable style seal. It sounds like the lid motors ar ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher
Dd603 no power to top drawer. circuit board in top drawer ckecks ok bottom board and top drawer wiring harnes were burnt. replaced both pieces. Still no power to top drawer. Need some help. Thanks
... Fisher and Paykel Dishwashers
DD603H TOP HAS NO POWER
... Fisher and Paykel 23 in. DD603H SS Free-standing Dishwasher
F&P dishwasher (DD603i) has no power to top drawer
No power to the top drawer needs to be verified.\015\012\015\012Are you saying the lights are blank and when you press the start buttion nothing happens?\015\012\015\012One reason the controller can shut the power is that the ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher
Lock Light After a power failure the lock button turned on with power restored. After holding the Air Dry Button for 4 seconds, the lock will not turn off. How can this be resolved?
... Kenmore 15322 / 15324 / 15329 Built-in Dishwasher
Greetings. I have a Fisher & Paykel dishdrawer - the top drawer appears to have lost power mid cycle and the lid has not retracted - no led display - no response from the buttons. The bottom drawer functions ok. I have tried turning the power off at the wall for 30 seconds and on again. I have tried swapping the top and bottom controllers and the bottom still works but the top does not, so the controllers must be ok Not sure where to find the model number sorry. Any suggestions?
Describethe inside of unit,any wear on it anywhere, the rack the dishes go on is it plastic coated? is it wore with rust comeing though on tips here and there? ... Fisher and Paykel DishDrawer DS605FDSM Stainless Steel 23 in Builtin Dishwasher
Fisher paykel DD609 diswasher - top draw does not drain properly. Water build up in bottom of the top draw even when bottom draw is used.
It is usually due to a small piece of broken glass or plastic blocking\015\012the little propellor that pumps the water out, (think of the little\015\012paddle in Nemo's tank)\015\012You need to remove the bottom of the machine, undo one screw ... Dishwashers
Child Lock light glows without pressing Energy Saver Dry button for four seconds. Cannot turn off by pressing Engery Saver Dry button for four seconds. Turning off main power and turning back on doesn't solve problem. But turning off main power for extented period, over night, and turning back on does fix proble for a very short period but Child Lock does come back on by itself. Is replacing the Console Assembly the only fix? Is there some button sequence to disable Child Lock altogher?
The mini manual for this dishwasher is located behind the kick plate. The mini-manual reveals that the child lock (called a control lock in the manual) can be disengaged by pressing and holding the air dry button for four seconds.or ene ... KitchenAid 24 in. KUDS25 Built-in Dishwasher