Having problems with your Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher ?

Says F1 with a picture of wrench. Won't shut off.


Answers :

Water in the bottom of the unit, has activated the flood switch. take out the bottom drawer, mop out the water, hope for the best!.... If it works, good and well, you may need to let it dry out for longer, to make sure the flood activation board is well dried out, if it still does not work, the board will need replacing.... The problem of flooding can be caused by some detergents foaming too much.
Repair Help & Product Troubleshooting for Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Says F1 with a picture of wrench. Won't shut off.


Water in the bottom of the unit, has activated the flood switch. take out the bottom drawer, mop out the water, hope for the best!.... If it works, good and well, you may need to let it dry out for longer, to make sure the flood activation board is w ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

The door would not shut. We checked all around and nothing was blocking the door from shutting. We determined the latch on the door was not releasing. I forced the door shut. The touchpad works...lights come on but unit will not operate. The release handle on the front just wiggles back and forth without effect. Lowes says it is one of three parts...none returnable. Any thoughts on what part and whether this is something average consumer can self fix? Thanks.


Hi,\015\012 Lowes is right regarding the parts needed.\015\012\015\012First check the strike part is ok - that's on the body of the machine not the door.\015\012\015\012Unplug the machine.\015\012\015\012Remo ... Whirlpool DU1055XTS Built-in Dishwasher

Kenmore Ultra Wash Plus Quiet Pak Plus We have moved into a rental. It has the above dishwasher but only the letter ABC and then the dial which also just says ABC. There are two button for each letter and then a further four button to the right of the letters. Can you tell us what the ABC stand for, what each other the two button by each letter stabds for and what the four buttons to the right stand for? We have no manual the machine looks old, and any pictures that might help are rubbed off.


... Kenmore Dishwashers

Mod# mdb7601aww.... When I press cycle key, say heavy duty, then close door the 2H light flashes. I press the start button and the unit will not start. I have shut it down electricly and get the same results. what can be the problem? The front panel with the start/delay buttons or the inside control panel? I like to figure this on out the first time because each of those parts are $100+.


... Maytag Dishwashers

Miele G842SC - opened the door while the dishwasher was running, the washer kept running and when I shut the door it stopped working. I have un-plugged the power and tryed to re-start but no luck. The Canada center says it is going to be 2 week for a repair and I have to wait to the day of to find out when the repair person is going to be there. I cannot believe the lack of service and support for this product.


... Miele Dishwashers

My Bosch dishwasher won't shut off. The timer says "1" forever and when you open it there is about an inch of SOAPY water still there.If you press start it goes to "13" and again counts down to "1" and stays there.


Bosch SHE44C06UC The dishwasher continues to run...I followed instructions and performed the diagnostic...the light above the quick wash was solid, the light above the rinse/hold was flashing...the code displayed in the cycle countdown window w ... Bosch 24 in. SHU43 Built-in Dishwasher

Our Asko D3112 was not draining, so we had maintenance drain the hoses to clear any blockage but it did nothing. They said it must be our pump not working. I ran one more cycle to see if things went back to normal, however now our pump won't shut off. We have to unplug the machine just to get the pump to stop. We had a repair technician come to look at the dishwasher and he says that it is a problem with the control panel/computer system. Something tells me it is a merely a loose wire and that w


Check your manual to see if you have a drain pan at the bottom of the unit, and a 'float' that checks for water collecting there. On at least some Asko models, water collecting in the pan causes the float to rise, which then changes the operation of ... Asko 24 in. D3112 Free-Standing Dishwasher

Model DF614WE dishwasher...door shut and catch apparently broken..can't get in although can say large part of the mechanism inside...ideas on how to open/replace ?


... Smeg Dishwashers

Won't shut off says F1 with a wrench symbol - Fisher and Paykel 24 in. DS-603 Built-in Dishwasher


Hi\015\012\015\012\015\012Thanks for using FixYa. F1\015\012error means that the flood switch has been activated. You’ll need to reset it by poweri ... Fisher and Paykel 24 in. DS-603 Built-in Dishwasher

I have a GE quietpower 3 and I cant get the door to shut. There is a green light on that says clean. There are no dishes or anything in the way of the door. I have no idea what is going on and I really do not want to phone my landlord. Please help!


The door latch is probably in the shut position. you need to move it to the open postion. ... Dishwashers

There is a light at the (lock symbol 3) position on the keypad. Any troubleshooting hints from the manual won't shut it off. Needless to say the dishwasher is completely inoperative. Any suggestions?


You have the control panel locked. Hold down the heated dry button for 3 seconds.\015\012\015\012\015\012 ... Maytag MDBH945AWW / MDBH945AWQ / MDBH945AWB Built-in Dishwasher

Dishwasher will not shut off and has water in the bottom of the tub. Whirlpool Gold, Made in Germany GU120ES1Q. I had a repairman in to check it out yesterday. Now the dishwasher will not turn on at all and the repairman says the two parts that it could be are not available.


... Whirlpool Gold 24 in BuiltIn Dishwasher w Adaptive Wash Cycle 24 in Builtin Dishwasher

When i start my dishwasher and shut the door the machine sounds like its starting then it starts beeping saying end of cycle!!


... Zanussi 18 in. ZDT5044 Built-in Dishwasher

We have a Bosch dishwasher. The manual says for models SHV46C13, SHX43C0 so I guess it is one of those. It stopped working and when I opened it there was a bunch of cloudy soapy water on the bottom. The power was not coming on at that point. I have noticed that lately when I go to push the on button, the light will go on and when I shut it it doesn't start. After a couple times of turning it off and on it will run normally. This has only happened a couple times though....


... Bosch Dishwashers

Hi! My Bosch dishwasher (SHE46C02UC/22) will not shut off. The display says "1" - like there is 1 minute left, but it will not stop. Yesterday morning I started the dishwasher at 7:30am and at 11:30am I realized that it was still running. I opened it and it still had soapy water on the dishes and had not cleaned the dishes well. Any ideas?


... Dishwashers

Wp-2700-4mhb downloader? The picture that is suppose to match the wp-2700-4mhb matches the manuals pic that indicates it has an adjustable downloader. However, the unit that we have does not match the same pic. The manual does say same models are factory preset and some are adjustable. Going by the pics ours should be adjustable but I can not locate anything that can confirm it. Does anyone know?


... Mi T M WP-2700-4MHB Pressure Washer

Technical support My dishwasher keeps saying the dishes are clean and it will not shut off. I cannot start a new load of dishes as long as it is set on clean. What should I do? Thank you.


Solution #1\015\012posted on Jun 26, 2008\015\012\015\012\015\012\015\012 ... Kenmore Dishwashers

I have a maytag dishwasher. The wash cycle runs for approximately 10 minutes, then shuts off. The timer will say 90 minutes +/- then will go to 1 minute and turn off? There is a grinding noise when the cycle first starts. Any ideas?


... Dishwashers

My Bosch dishwasher has several problems: 1) Water doesn't completely drain out and dishwasher kind-of smells when I open it -- I do keep the filter very clean. 2) The dishwasher takes HOURS to go through one load, no matter what the time says on the display and no matter what type of cycle you choose -- quick, delicate or regular. 3) The red display often displays something that looks like "2h" at the beginning of the cycle. 4) The place where you put the detergent doesn't shut.


Hi Kathryn .I think you have a defective pressure switch. The pressure switch is located near to the drain pump, and the device is used to determine when water had been drained completely.Also check the floater switch located ... Dishwashers

I'm having a similar issue with a unit that I purchased from Best Buy a few weeks ago. I'm not sure of the model number as it was a display unit and they didn't give me the proper user manual, but it looks just like the unit pictured in this post. I've uploaded a video of the issue to YouTube : http://www.youtube.com/watch?v=uCx8DzY-Iv0 The first time we hooked it up, it ran for about an hour before shutting off and becoming completely unresponsive. None of the buttons would light up. We repl


Watched the youtube video about the problem with your dishwasher. The thing that I am unclear is who replaced the thermal fuse and the control board? Not sure how this was done without knowing the actual model number. Is it possible to clarify this ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

Maytag MDBTT79AWW dishwasher fills and nothing else. Once filled you hear a click, followed by a humming sound for 3-5 seconds, then silence. This will happen two or three more times, and then unit will shut off. Motor doesn't start. Repairman says he thinks control board is bad, but he sounds like he is guessing. I performed a field service test , which indicated a fault in the high current motor circuit. Unit is seven years old. Don't know whether to attempt repair, or replace.


That sounds like the motor trying to start but being jammed it is shutting off via an internal breaker. Check for something in the bootom of dishwasher that might have gotten down there that could do this. You might have to take the sprayer off and s ... Dishwashers

I have a brand new Miele dishwasher which has worked grate since it was installed 2 weeks ago. It keeps shutting itself off & indicates an F13 fault. I looked in the manual, see that water is going in fine & pressure is good. It then says to clean water intake filter. How do I get to that ? I don't have a user maintenance manual. I'm on city water & doubt that the filter is clogged but My wife will kill me if I don't get it fixed today. Can anyone help. Glenn


On my Miele 1220 dishwasher, the inlet filter is inside the inlet hose connector, where it screws onto the water supply. To clean it:\015\012\015\0121. Turn off the stopcock.\015\0122. Unscrew the inlet hose.\015\0123. Remove the black rubber s ... Dishwashers

SEARS/WHIRLPOOL DISHWASHER Model 665.16014401. The CLEAN light keeps blinking and washer will not run. Op. instructions say to check the heater circuit. Heater element tests at 12.9 Ohms and thermo unit at 55 K ohm and the unit I beleave looks like overtemp cut out is less than 1 ohm. these look like good #s to me so I suspect the controller p/n 8564544. When I look up the number online I find it has been replaced with 8564546, but the only picture I can find of it looks like the connections are


... Kenmore Dishwashers

Pressure washer has been sitting up for about 2 years.. worked perfectly before I parked it.. lol.. But, I put a new spark plug on, cleaned the filter, sprayed carb cleaner in it drained the gas tank and added new gas.. But it still does the same thing.. It starts in the choke position, runs awhile, and then shuts off. While its running, I tried to put the switch in the run position and it kills. Just wanted to see what an expert would say about the matter before I Brake it down. thanks


... Briggs and Stratton 020275 Elite Series 3400 PSI Portable Gas Pressure Washer

I start the dishwasher & after about 2 minutes 9E code comes up which manual says it means low water level error - we shut off circuit breaker & then turned back on & didn't help - HELP PLEASE


... Samsung DMR78AHS Builtin Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0538 seconds