Having problems with your Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher ?

Can anyone help me with my fisher and paykel DD603 the top draw is showing F1. fault 1. thanks


Answers :

When F1 is showing up then there is a leak. The leak is causing by the top lid seal not close down tightly to the opening tube surface groove. Pull out the tube, put in tower in the bottom housing accessing from the left side. Only this side you can have room to put your hand in drying out the bottom. Do the same thing with the bottom drawer since the floor sensor is at the bottom and when it detects water then there is some water at the bottom housing of lower tube also. After Drying it out you can use You can use the lower tube wile ordering parts for the upper tube. Need to order 2 upper actuators and a lid seal with YOKE, if you want to do it yourself. Otherwise, have a F&P serviceman come in and diagnose the problem, not any handyman since the F&P dishwasher is not like others.
Repair Help & Product Troubleshooting for Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Can anyone help me with my fisher and paykel DD603 the top draw is showing F1. fault 1. thanks


When F1 is showing up then there is a leak. The leak is causing by the top lid seal not close down tightly to the opening tube surface groove. Pull out the tube, put in tower in the bottom housing accessing from the left side. Only this side you can ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

My Fisher and paykel dishwasher drawers are showing a F1 fault on the top drawer screen, But it was the bottom drawer that was in use at the time of the fault occured. The top drawer will open but the bottom drawer is locked. I need to unlock this drawer to get my cooking equpiment out. Please Help. I know that the F1 fault is a flood fault but how do fix it.


... Fisher and Paykel Dishwashers

Fisher & Paykel DD603 Error code F2. My top dish draw is showing the error F2 , I have taken out the baskets, spray arm, propellors. The metal shaft is completley frozen, I can't move it at all. I see other posts say to wiggle it to free it but that doesn't work here. Can I get a copy of the service manual too? We are along way from a repair man to come look and I like to try myself before spending more money on it. My e-mail is [email protected] Thanks.


... Fisher and Paykel 23 in. DD603H SS Free-standing Dishwasher

Fisher Paykel DD603 Problem. Top drawer shows F1 and pump runs continuously. Lower drawer does nothing, no display. I think the Electronic Controller in lower drawer is fried and maybe the Mains Filter Board. Please help.


Yup, definately the bottom drawer controller, for some reason you can run a DD603 with no board in the top, so long as you have a board in the bottom, but not the other way around. This is the fault you get, constant F1 from the top drawer. If you ar ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Fisher paykel dd603. Fault code appeared bL, now playing Star spangled Banner Tried turning it on/off with no joy. Any suggestions?


... Fisher and Paykel 24 in. DD-602 Built-in Dishwasher

Hi the top draw of my fisher & Paykel 2 draw dishwasher is displaying an F2 with a spanner display, can you please help. Vicki


Hi Vicki.F2 means that there is a problem with the rotor attached to spray arms on one side, and to impeller pump on the other. The electronic control detects rotation thanks to a hall sensor located at the base of the rotor. If rotation ... Fisher and Paykel 24 in. DD-602 Built-in Dishwasher

I have a Fisher Paykel dishwasher Model # DD603. It is about 5 years old. My problem is that the top drawer is difficult to open Pulling it open it becomes easier once I get beyond a certain point. The reverse is true when closing it. Any help would be appreciated. Thanks...Jared


Sounds like your lid actuators are not opening completely, they move the lid up and down. They are prone to failure, F/P has new actuators, German made, that can be installed and would probably solve the problem. ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Fisher and Paykel DD603 top drawer jammed and will not opem/close properly without brute force!! Please help!


Hey,\015\012I had this problem before!!!! Just unplug the unit off and wait about 10sec and plug it back on.....that usually does the trick. ... Fisher and Paykel 23 in. DD-603 Built-in Dishwasher

Need to know how to take the see through cover off under the top draw on the DD603 dishwasher to replace the drain hose on Fisher and Paykel


I think you are referring to the wiring cover at the bottom of the drawer. I will assume you know how to get the drawer out.\015\012\015\012To remove the wiring cover \015\0121. Carefully release the four wiring cover clips from the ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Hi, I have a Fisher and Paykel DD603 dishwasher. The bottom drawer works fine but the top drawer doesnt work at all. It appears normal until the start button is pushed and then I get 3 very quick beeps followed but a 4th slightly longer beep. Then nothing happens, any ideas or help would be much appreciated. Thanks Neville.


... Fisher and Paykel 24 in. DD603MFC Built-In Dishwasher

Anyone have experience with a Fisher Paykel double draw dishwasher (model DD24) getting stuck in wash mode? Once it hits exactly 48 minutes it stays there. Only several hours later it cycles through OR you have to turn it off put it in rinse mode to complete. Already tried all the basics (unplugging, no fault codes, cycled through the diagnostics everything good and working). Did the quick diagnostic cycle of 14 minutes and everything cycled through fine. Next step will be to put the bottom cont


... Fisher and Paykel Dishwashers

Haveing a u3 code on my top draw of my fisher & paykel any help on this


First have the unit turned off. Then \015\012open up the drawer that,s giving you trouble.\015\012The badge ought to be lit.\015\012Now simultaneously press the static touch pads on each end of the led status lites (the ones on the drawer ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Fisher-Paykel DD603 DishDrawer shows F1 fault code. The Flood Switch has been activated. I need instructions on how to re-set the flood switch. I have two drawers that are possitioned one above the other and the are both giving the error of the activated flood switch. Any advice or instruction is greatly appreciated.


Fisher-Paykel DD603 DishDrawer shows F1 fault code. The Flood Switch has been activated. I need instructions on how to re-set the flood switch. I have two drawers that are possitioned one above the other and the are both giving the error of the activ ... Dishwashers

Dishwasher error have a fisher paykel ds603i, top draw is receiving an error, constantly beeping with red light showing, bottom drawer is running


The error was a flood fault, water was not draining from either of the drawere, I removed the bottom drawer, dried drip pan and used hairdryer to dry fault sensor, the dishwasher then reset itself and works fine. ... Fisher DS603W / DS603B / DS603I Dishwasher

Hello, We have a Fisher Paykel DD603 dishwasher. I have spent $400 on parts and service call and still have same problem: U1 fault code. I have changed water inlet valve and electronic controller. I'm exasperated. Anyone with suggestions ? Jeff G.


... Dishwashers

I need a copy of the service manual for the Fisher Paykel DD603 dishwasher. Can anyone help? Thanks


Hope this is what your after\015\012http://www.fisherpaykel.com/admin/pdfs/pdf_usecares/527971B_DD_user_guide_USw.pdf ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

F9 fault on DD603 fisher and paykel dishwasher


... Fisher and Paykel 23 in. DD-603 Built-in Dishwasher

Fisher paykel Hi I have a fisher paykel dd603 dishwasher. when I run the bottom drawer on its own ,,it also fill the top drawer with water ! so after the dishwashing cycle , im left with water in the top drawer. im guessing that a valve should close on the top drawer to stop this happening? is there a part I could order and replace myself? thanks [email protected]


Check your email ... Fisher and Paykel 23 in. DD603H SS Free-standing Dishwasher

Fisher paykel DD609 diswasher - top draw does not drain properly. Water build up in bottom of the top draw even when bottom draw is used.


It is usually due to a small piece of broken glass or plastic blocking\015\012the little propellor that pumps the water out, (think of the little\015\012paddle in Nemo's tank)\015\012You need to remove the bottom of the machine, undo one screw ... Dishwashers

My DD603 has been working perfectly well until recently when the top draw stopped working as though the power had been removed. I have checked akk connections which appear OK, but I understand there is a problem with the top draw in that the thermistor goes. I would welcome your experienced help and advice as I understand one cannot just replace the thermistor.


Hi just read your posting.Now there are a couple of reasons that the draw does not power up.The first is the element to heat the water is open circuit,The second the control board is faulty or your wiring is faulty.The last is your lid activator boar ... Fisher and Paykel 23 in. DD-603 Built-in Dishwasher

We have a fisher Pakel dd603 2 drawer , the top draw wont close so we r trying to remove it to see what is blocking it can't figure out how to take top draw out


Hi!There are two small clips down in the front of each drawer, one on each side. You depress these clips/tabs which are attached to the drawer slides, and then the drawer can be lifted away from the rails. You need to be very careful not to dam ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Fisher Paykel DD603 top drawer will not drain


Hi and welcome.Either your hubby forgot to knock the plug out of the dishwasher connection on the new disposal, or he does not have a dual-air gap installed and the hoses to the dishdrawers do not have a high loop to prevent back-siphoning into ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

My Fisher Paykel DD603I top draw whines when it is first turned


The lid seal on the top drawer is faulty and needs replacement. It might be cut or damaged and is obstructing the drawer from closing. THis also may have caused the flood switch to trip as water can leak if drawer is not sealed. ... Fisher and Paykel Dishwashers

Hi please help. the top draw in my dd603


The sensor that tells the dishwasher that the drawer is closed may be faulty or dirty. This means the dishwasher thinks the drawer is open and ignores the start command.\015\012\015\012You can clean/ replace the sensor at the back of the ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Dishwasher top draw DD603 has stopped. Control panel will not light up either. Have tried turning it off and back on at wall. Bottom drawer works fine. Help!


... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1240 seconds