Having problems with your Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher ?

Our two drawer dishwasher model 603dd was working - it showed the "flood button" and then the power cut out and now there is no power to it. Its two years old. Id it worth fixing?? id there anything we can do to fix it or do we need the Fand P repairer out? Thanks


Answers :

I have a the F&P double drawer d/w. When I use only the top drawer, the bottom one fills with (dirty) water; and when I use only the bottom drawer, dirty water fills in the top drawer. When I use both at same time, there's no problem. Any suggestions/solutions? Thanks, Kat
When my dishdraw had this prob, one of the motors that pulls the top lid down to seal the draw, wasnt working. has 2 motors each side, just had to replace one of them.
Repair Help & Product Troubleshooting for Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Our two drawer dishwasher model 603dd was working - it showed the "flood button" and then the power cut out and now there is no power to it. Its two years old. Id it worth fixing?? id there anything we can do to fix it or do we need the Fand P repairer out? Thanks


I have a the F&P double drawer d/w. When I use only the top drawer, the bottom one fills with (dirty) water; and when I use only the bottom drawer, dirty water fills in the top drawer. When I use both at same time, there's no problem. Any sugg ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

My fisher paykel dishwasher DS6031 started beeping and would not stop(not during use). I turned off the power for 20 seconds. The beeping stopped but the unit appears dead. The only manual recommendation is to replace controller. The dishwasher is approx 7 years old. Any ideas on part #, price, is it worth fixing?


... Fisher Dishwashers

It has stopped working, There is power going into te machine. An engineer from Repaircare said it was the programmer, ordered a new on vcame to fit it said it was te wrong one. Ordered anoter one Whirlopool saaid it was out of stock, on back order. Waited 3 weeks engineer came with new programmer, fitted it it didnt work. Said maybe they can't fix it. Thew nachine is only two years old and a popular make. WHAT CAN I DO???


Hi,I am sorry to hear regarding the problem. You need to have some patience in order to find what's actually work with the Dishwasher. I cannot jump to the conclusion as there might be "N" number of reasons.Now, Fi ... Whirlpool Dishwashers

10 year old Kenmore Ultra is leaking early in the washing cycle. Wondering if this is worth fixing or need to bite the wallet and buying a new one. I am worried about affecting the new cabinets even though the dishes seemed to be clean on the two occasions that the dishwasher has leaked. Only need a somewhat simple machine- I'd appreciate any suggestions as to what brands I should research if buy is the conclusion. Thanks.


At 10 years old I wouldn't put much if any money into it. Do check the water connections as it may be something simple that just needs to be tightened or a washer replacement. Replacing the valve is a simple and inexpensive fix but don't bother going ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

I have a Whirlpool Gold Model GU2700XTSBO its only 4 years old. About two weeks ago i noticed that the green lights were flashing and it would not run, I unpluged it for an hour and pluged it back in and the lights went away and it worked ok for the last two weeks. Last night I went to use it and there is no power at all to the washer, I checked the power source to the outlet and there is power there, so I dont know if there is a reset button or some control panel problem?


... Whirlpool GU2700XTSB / GU2700XTSQ / GU2700XTST Built-in Dishwasher

I have an old Bauknecht dishwasher GSF 3160 S that a friend gave us 10 years ago. It was stored for that time, and now if I try to use it, it leaks out through the bottom and floods the kitchen. I would like to know 1) is it worth fixing from the point of view of how energy/water efficient (or inefficient) an old dishwasher is - if you know the specs for this particular machine, and 2) what needs to be changed if it is worthwhile fixing. I don't know what else might not work, because I only pu


... Bauknecht Dishwashers

I have a Frigidaire Professional series less than five years old. It won't run and flashes the wash, clean, and sanitize lights simultaniously. Any thoughts on what the problem is and whether it is worth fixing? This is the second Frigidaire I have had in ten years. The model number is PLD2851RDC3. Any help would be greatly appreciated before I go out and get my third dishwasher in ten years!


Hi.The two lights are not an error code, but they are telling that the machine is in failure mode.The error code is retrieved performing a water/service test.The water/service test is a special function initiated ... Haier HDP18PA Stainless Steel Free-Standing Dishwasher

MyMaytag dishwasher is leaving a grey film on the back of my dishes ie the cups are shinny on the inside but very dull on the outside my dishwasher is at least 13years old maybe 15 years is it worth fixing can it be fixed


... Maytag Dishwasher

Water pump gone on our d1796 and asking $450 to fix also rinse aid broken as well. Washer is 7 years old. Is it worth fixing. Thanks, Greg.


$450 Wow.... 7 years old, in my humble opinion.. NO WAY. It is better to put your money into a new one rather than have "Fixed" one that may break down again, once things start going... well.. you know the story I am sure. ... Asko D1776 Stainless Steel Built-in Dishwasher

I have a GE Triton XL dishwasher that all of the sudden stopped cleaning well. I now find food residue on the dishes, and the detergent cup does not empty completely. I use the gel detergent, and I just see the gel dripping down the door after the cycle is complete. This machine is about 5 years old, and I'm looking to see if it can be easily fix. I rather not have to call someone to tell me that I have to get a new one, or pay more to fix it that what it is worth. Thanks


Hi If you are noticing that the dishes are not clean, then there are a few things to check for. Check the soap powder if it's kept in a dry environment. Also try replacing the powder with something like a gel or liqu ... GE Tritonr XL GSD6260JCC Dishwasher

I have a Magtag dishwaher that is leaking out of the bottom right hand corner somewhere. It is at least 10 years old, works great otherwise. What should I do ? Is it an easy fix? Is it worth it to fix it or toss it?


I will assume the leak is at the front on one of the corners of the door. We had this problem and it appeared to be caused by someone mistakenly placing too much weigh on the door when it was open. Our solution was to bend the door back in the oppo ... Maytag MDB7100AWB Dishwasher

My dish drawer won's start. there seems to be no power. i checked the plug and it is fine, but the dw is dead. what are some things i can check? it is a dish drawer - single it is two years old never did this before wall plug has power there are no lights, no electrical activity at all


... Fisher and Paykel DD605I Dishwasher

My two year old Bosch dishwasher is not cleaning well and is leaving gritty food on most glasses, cutlery, etc. Worse on the top but also not good on the bottom. I have tried cleaning the removable filter on the bottom and rinsing the two 'wands' - one on top and on the bottom so that the little holes are not blocked. I've tried using the power scrub mode. I've run the dishwasher twice with detergent and no dishes. This has problem has persisted over at least a month. Can you please help me?


Hi, \012I have an older dishwasher also and recently mywife also complained about it not cleaning right... so me being the man I amtried in vain to clean the things... Bought new spray arms online and installedthem in minutes...now the thing works li ... Bosch Dishwashers

Is it worth fixing a 10 year old KitchenAid Superba side by side?


... KitchenAid Kitchen Aid Superba Series Dishwasher Used Kuds011jbt0

Sometimes the cycle would get stuck (like transmission not working). Now making noise but not taking in water to wash. Machine about 8 years old and used daily. Isi it worth fixing? Sevice call is $140 plus parts and labor. If not what would you buy in its place? SHU3032UC/UC12


... Bosch 24 in. SHU30 Built-in Dishwasher

Whirlpool adg 642 model when you press the on button the green light flashes it use to start by holding the start button but that has now stopped is it worth getting somebody out to fix as it is less than 3 years old.


... Whirlpool Dishwashers

We have a GE Quite Power 2 dishwasher and it doesn't dry the dishes even if you add the jet dry. The dishwasher is about 4 years old. What could be the problem? Where could I get an owners manual for this unit so I can try to fix it?


... GE Dishwashers

My Powercraft 9686 pressure washer has always been stored in my garden shed. It is 4 years old and when I used it last September the power washer had lost considerable pressure, as it was leaking water. Can I fix it for a reasonable price? Thank You. John O D


Put some silicon spray in inlet/outlet then reattach hoses then run it will proform after a while do this everytime you store it pryer to sroring away........... ... Craftsman 2700 PSI Briggs Stratton Powered Pressure Washer

KUDIO1ILBS2 KitchenAid Dishwasher, two years old, not heavy usage: control panel is dead, no other power problems in the apartment, the apartment's electical box shows all breakers ok.


These dishwasher have a thermal fuse near the contol panel protecting the heat sensitive computer. Do you use the Sanitize or Anti-bacteria cycles?? If so then these cycles get very hot and could have made the fuse blow. Kitchenaid also had some loos ... KitchenAid 24 in. KUDI01ILBS Stainless Steel Built-in Dishwasher

I have a Bosch SMU2046Uc/14 about 15 years old. Sometimes it works, sometimes not, for the last couple of months. Now it has stopped working completely as if no power. Checked the breaker. Another problem - one of our kids just today jammed the door lock on it and we cannot get the door to latch at all. Can you help with any one of these problems? How do you fix or reset the door latch??? What else can we check to troubleshoot the dishwasher? Thanks!


... Bosch 24 in. SHE44C02UC / SHE44C06UC / SHE44C07UC Built-in Dishwasher

My dishwasher is 5 years old it went bang a few times then a big bang and tripped the safety switch is it worth fixing or should I replace it it is a Conia


Did a dish break in there? if not, something went real bad,...and if this is an inexpensive model, throw it away and get a new one,...the inexpensive ones these days are of very poor quality,....sorry to say, but true,....good luck, cracklin joe ... Dishwashers

Customer bought house with a Viking Dishwasher already there. He has no user manuals or documentation with the model number listed. None of the stickers on the side of the door have a Viking model number. This unit is a Quiet Clean System with Auto Water Heating and is (he thinks) about two years old. How can I find out what the model # might be or better yet how do I find out the part # to fix the main control board / interface. It just keeps blinking.


Check the back of the unit for a tag.... otherwise - removing the clock... it should have a part number on it.\015\012\015\012Thanks! ... Dishwashers

I have an 8 year-old Kenmore 665.16912 dishwasher. Worked fine until two days ago. Then it stopped working altogether: nothing lights up on the front panel. I have checked the 120 in the electrical box, the door switch is working, the thermal fuse is working and there is 120 volts at the white and black connections to the timer control board. I bought a new timer control board for $120 and that did not fix the problem. What else could be causing the unit to completely stop working?


If all are really good then the only thing it con be is the display (8269205) $25.00 part, if it's bad dishwasher wont run ... Kenmore 16912 Built-in Dishwasher

Dishwasher leaking my GE Natulus dishwasher is leaking from the bottom seal, Is the two pieces that are at the very bottom that hold the motor where the seal is? I'm not seeing a seal. I'm not sure if that is where it is leaking. I've got the thing torn apart so it is difficult for me to say where it is leaking. I'm going to give it a whirl. Don't know if the repair is worth the trouble. The GE dishwasher is only 7 years old. What is the avg life of a dishwasher. I'm sure it's not top of the lin


There is a front door seal that may be the issue. It seals along the door sides/top and continues under the door to seal the bottom surface when closed. Mine pulled out of the seal channel under the open door where you can't see it without a small mi ... GE Nautilus 24" Built-in Dishwasher

My G865 Miele dishwasher goes partway through the cycle then gets hung up and runs without advancing. We left it running when we left for vacation and it was still running when we came back. I'm assuming it is the timer mechanism. The dishwasher is ten years old but has been run only every other day or so. Is it worth fixing or is it better to replace?


It will cost alot to get repaired,10 years old you got money out of this one. ... Miele 24 in. G865 Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0740 seconds