Having problems with your Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher ?

The bottom drawer does not lock, the plastic spring catch on the right side rail (rear) is "sprung" before the drawer is fully engaged, suggesting that something is in the way and pushing closed the plastic catch - any suggestions?


Answers :

I am slightly unsure of the problem you are having with the bottom drawer.
\015\012
\015\012Not sure which plastic catch you are referring to. There are no locks in the drawer. It slides on the rail and shuts against the face of the housing. On start (when ON is pressed) the lid seal decends from the top and locks the drawer so that water does not leak during operation.
\015\012
\015\012Have you actually taken the drawer out from its rails? Are you please able to take a photo and attach to your comment.
Repair Help & Product Troubleshooting for Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The bottom drawer does not lock, the plastic spring catch on the right side rail (rear) is "sprung" before the drawer is fully engaged, suggesting that something is in the way and pushing closed the plastic catch - any suggestions?


I am slightly unsure of the problem you are having with the bottom drawer.\015\012\015\012Not sure which plastic catch you are referring to. There are no locks in the drawer. It slides on the rail and shuts against the face of the housing ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

The top drawer of my Fisher Paykel two drawer dishwasher will not close all the way. Something appears to be stopping it. How do I fix it?


To find out what might be blocking it, you can remove the drawer. There are two tabs one on each side of the drawer near the bottom front. Push those in and pull the drawer out. You can lift the drawer up and push the slides in to get them out of ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Fisher Paykel Double Drawer DD601v2. Half way thru a cycle the alarm went on both drawers even though the top one was not inuse or switched on. The error on both drawers is F1. If we push the power button on both after a few seconds they both start up making a whirring noise and both drawers flashing. We have to unplug the machine to stop the irritation. What is wrong and how can we mere mortals fix it ?


Hi,The F1 error means that the sensor that is located in the pan at the bottom of the machine has sensed water.It does not want either machine to run with a leak so it will shut down the operation of both drawers. ... Fisher and Paykel Dishwashers

Just looking for some advice on removing the drawer from my servis washing machine, sorry I dont know what model it is. I need to clean the powder drawer but cant find any way to remove it from the machine. There is no internal part marked push that i can see and im wondering if i need to unscrew the four screws around the drawer. Help please! Cheers


Send an email to this address asking for the user guide for your model \015\012\015\[email protected] ... Servis Dishwashers

Top drawer of 2 drawer f and p dishwasher was very hard to slide open and have to really push hard to close, like something is binding


Hi,aside from any obstruction is thet DishDrawer® square and level?.\015\012Is the DishDrawer® fastened securely to the cabinetry to prevent flex or movement? If not, the square geometry this appliance requires with affect drawer performanc ... Fisher and Paykel 24 in. DD603H W Built-in Dishwasher

Double dash on display and when put in service/maintenance mode, all the lights came on and stayed on overnight. Still not working until I tested the door switch. It looks like poor engineering on the design. Plastic bar that depressed the door switch was not pushing all the way. It appears that the bar was bent to compensate for the too close tolerances and after the depressing of the switch for six years it did not reach anymore. So I got hair dryer, heated the plastic bar and bent it down to


... Kenmore 24 in. 15932 Built-in Dishwasher

The Bosch plastic push button (AP2804452) has broken on my SHU9950 dishwasher. The switch itself is still good. I have removed the broken pieces of the bad button from the unit and am now depressing the switch without the button. When I get the new push button, what is the proper way to remove the control panel cover to put the new button in place? Thanks!


... Dishwashers

The door will not close. It appears that the lock is in the closed position and will not allow the catch to close fully and engage. The m/c is mid cycle so I have switched off at the main socket


Check for obstructions, Check the door \015\012latch the latch may have moved into its housing,use a screw and position the door latch properly free from any obstruction,then try closing the door again..if not then you may need to ... Neff Dishwashers

My GE PDW7880G doesn't clean items in the top rack. The dishes on the bottom seem fine. I do make sure to push the top rack all the way back so it engages.


Removed the sprayer. the part that spins under the top rack and check that the holes arent clogged. ... GE 24 in. Profile PDW7880G Built-in Dishwasher

I have an Asko 3251 that is about 4 years old. It has been great up until 2 nights ago when it just keeps running when is has completely cycled. You can open the door and it keeps running. You can push the shut off button and the lights on the controls go out but something keeps running. The only way I can shut it off is by shutting off the circuit breaker. The next morning I can turn the breaker back on and it will be off. Does anyone have an idea what is causing this?


... Asko 24 in. D3250 Built-in Dishwasher

I have a Bosch Dishwasher, model SHX57C05UC/21. I can not open the door fully; it seems to catch on something when its halfway open. Any ideas why this is happening? The DW was purchased brand new in 2005. Thank you for your help.


... Bosch 24 in. SHU66C02 / SHU66C06 Built-in Dishwasher

I've had an LG LDF6810ST dishwasher for about three years with no problems. All of a sudden it won't close. It finished the wash, I emptied it, and when I went to close the door it wouldn't close all the way. It was as if something was getting caught not allowing the door to close completely. I searched and found nothing blocking, then I looked at the door latch and it looks as if the child lock feature is engaged. So the door is locked while open. I turned the child lock on and off through the


If all else fails.... kick it! at least you will feel better! ... LG LDF6810ST Stainless Steel Built-in Dishwasher

Whirlpool ADG993, door fault: Hi, a few weeks ago soemthing broke on the door to my diswasher and it falls open wide with no stopping half way as usual. That was fine as the machine could still work, but now the door won't close. All seems fine until you get all but closed and then the door raises slightly from the bottom right corner, preventing it from closing. It looks like something may be jammed in there which pushes the door up at the last minute. There's a man coming out on Friday,


... Whirlpool Dishwashers

The electronic panel on the top of the door doesnt light up anymore and is unresponsive, when the power is turned on, the machine makes a sound like its running or draining or something, but nothing is happening. This all started after a potential electrical disruption following a power outage. Perhaps there is a fuse or some relatively easy way to fix this? or am I screwed and should just call a repair man. Thanks for your suggestions, Brodie


... Bosch 24 in. SHX56B05 Stainless Steel Built-in Dishwasher

Whirlpool ADG993 Hi -Had several issues with the door similar to those posted, coming away at the hinge, not sitting flush so wont close. New issue - the latch has given way, it sounds like it works but the catch is not holding, the door then falls to the floor. Any suggestions for making the latch hold the door closed? - thanks..


Dear friend,\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012ngfam at you service!\015\012\015\012If its new your warranty is for 12 months!If the dishwasher is 10 years or older its not worth inve ... Dishwashers

I have a Kenmore 665.1373 Ultra Wash dishwasher that will not work. In the past few weeks, it stopped mid-cycle, the the clean light began to flash. Sears sent out a technician who told us that the latch was not catching. He adjusted it, did something with a computer and the dishwasher worked for a couple of days. This time, it would not start a cycle, it would only show heated dry if you pushed the smart wash button and nothing if you press start. It looks like some of the lights are continuous


... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

GE TRITON dish washer. Utensils are stained after wash. I tried all that suggested solutions like cleaning with white vinegar, make sure hot water flows before it starts. I donot think we have hard water problem and also tried Jet dry rinsing. Nothing is working still i see utensils soap stains and not completely rinsed. I am desperately looking for an answer. I am thinking of is there a way i can test whether the middle tower is really opening up to spray water or not. It might be something els


Hi,The scum, film and white\012residue problems have started since the reduction of\012phosphates in dishwasher detergents.Here is a tip that\012will help you to solve the problem of films, residue, and scu ... Maytag Dishwasher

I have a keihin carb on a honda engine, used on a power washer, that only runs with choke fully engaged. I have taken the carb apart and cleaned it thoroughly to no avail. the part # on the carb can't be found online. I don't know enough about carbs, theory of operation, to continue and can't find a technical ref for the keiwin being used, any suggestions as the only # on the carb yeilds no hit on the web. # stamped on carb is 65bbkf7


... Honda Pressure Washers

My Hotpoint Aquarius FDL570 dishwasher door suddenly won't close properly. With a hard push my husband cal fully close it and it still works. Does this mean that we need a new closing catch mechanism? If so what's the approx cost?


... Dishwashers

I need the diagram for the door pulley system so I can make sure I am hooking it up right. The original door chord/pulley assembly broke. I ordered new parts, Now I want to make sure I am putting it back together the right way. The edge of the screw- on floor panel is pushing the plastic hook off of the door hook when you shut the dishwasher door.


... KitchenAid Dishwashers

Door catch does not engage when door is closed. The programme still works even though the catch does not engage. I have changed the door catch and the micro switch but the catch remains in the same position


... Dishwashers

Lower drawer has something behind it preventing it from closing.


Pull it out and take a look from the back ... KitchenAid Double-Drawer Dishwasher System Whisper Quiet Sound Insulation

Electrolux ESL 63010 dishwasher. This worked fine until the door catch broke. I replaced the catch but could not remember which way round the two electrical leads went (red and black). I tried both ways with the same result. The lights come on the control panel and I can change the programme, but on closing the door the house fuses blow. I have checked the earth cable is fine. Any ideas?


Red - is active powerblack - ground or neutral ... Electrolux Dishwashers

Won't run unless i push ******* the drawer


On the right side of each drawer, near the top is an optical sensor (light pipe) that reflects infrared light of the side panel to indicate proper door closure. I f the unit is not aligned/installed properly the sensor will not sense proper door clos ... KitchenAid 23 in. KUDD01DPPA Stainless Steel Dishwasher

Indesit d63 dishwasher, door locked shut. took top off+got to latch, the plastic catch wouldn't pull out of the latch. undid it all, all seems unbroken but cannot seem to arrange the latch so that it will allow the plastic catch to come out when levered. also not sure if the handle is supposed to click the switch to another position, or just tweak the switch as it opens the door. is a new latch supplied with the switch ?


Check with whoever you order the latch from, usually parts are individual for electrical parts and never assume that the screw or washer will come with new one, save every piece. ... Indesit 24 in. D63 Free-standing Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1058 seconds