Having problems with your Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher ?

My dishwasher impeller failed----just was loose in the drawer. i ordered part 525884P, motor rotor assy which has arrived from new zealand. but, there were no instructions on how to remove previous assembly and install the new. are instructions available? steve nute


Answers :

First fold the racks on the side of the drawer up out of the way

Then Remove the cutlery basket

Then with the drawer fully open grab the main rack from the front and pull upward, You will need to persuade it past the rinse aid dispenser but it will go.

Lift off the wash arm

Remove the small food trap on the bottom by lifting it out

Then rotate the outer ring around the wash motor, this will allow you to remove the large stainless tray in the drawer bottom.

To remove the impeller grab the plastic housing and twist counter clockwise.

Installation is just the reverse of the above.

I hope this helps.
Hello, this video will explain how to repair the rotor and a F1 error code.\015\012
\015\012

http://www.appliancerepairlesson.com
Repair Help & Product Troubleshooting for Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My dishwasher impeller failed----just was loose in the drawer. i ordered part 525884P, motor rotor assy which has arrived from new zealand. but, there were no instructions on how to remove previous assembly and install the new. are instructions available? steve nute


First fold the racks on the side of the drawer up out of the wayThen Remove the cutlery basketThen with the drawer fully open grab the main rack from the front and pull upward, You will need to persuade it past the rinse aid d ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Drain pump i bought a new frigidaire dishwasher and setting it up... i removed the drain hose from the drain pump and noticed the pump outlet has a thin rubber diaphram...should i remove it....set up instructions say nothing about it...ty....tim


My husband did remove ours,and we too have a frigidaire 18" built in dishwasher. But ours won't drain, he says it might\015\012be the pump, but he is hoping not.. everything works except when its draining. water just sits there in the bottom.. ... Frigidaire 24 in. FDB510LC Free-standing Dishwasher

Bosch d/w model shu6806. Leaking lower door gasket. have new gasket but would like manual instructions on replacement. must door be removed? Any particular warnings? Charles


I have had the same problem and finally stumbled upon the answer today!\015\012\015\012If you are looking inside your dishwasher, look mid way up the right\015\012side wall and there is a valve/hole...if that hole is covered up (e.g.\015\ ... Bosch 24 in. SHU43 Built-in Dishwasher

I need to remove a broken heating element from my Whirlpool dishwasher and install the replacement part. I was hoping it would just "pop" out and the new piece would push in, however, it seems that it is not that simple. I need instructions.


Depend on how the heating element goes through the tub you do have to go underneath (if it goes down through the tub in the front) or even remove the dishwasher from the cabinet (if it does it on the back of the dishwasher). The tub is made of ... Whirlpool GU1200XTLS Stainless Steel Dishwasher

Motor removal Our dishwasher (Model LDS 5811WW) has LE come up when you turn it on. We were told by LG that it needs a new motor...so how do we get one? Also do you have any instructions as to properly getting it out? The clsest repair person suggested is 1 hr. from us and it would cost 3/4 of what the diswasher cost originally.


I am having a same problem. You can open dishwasher sump assembly from inside the dishwasher and check if something is blocking white impeller. I tried to open impeller and sheared screw head as I did't realized it is left handed screw. Even after cl ... LG 24 in. LDS 5811 Built-in Dishwasher

I am trying to replace the GUIDE RAIL BRACKET ASM on my GE dishwasher (model no. GSM1800JWW). How do I either: (a) remove the old brackets, and then install the new ones; or (b) remove the rollers from my new brackets, so that I could slip these rollers onto the old brackets still in the dishwasher, saving the trouble of removing the old brackets in the first place? Either solution would be acceptable, but right now I can't figure out how to do either one without breaking something. Thank you v


Be ready for both . because if they break you can still replace it. but (a) is to me the better choice. let me know how you made out and send me a 4 thumbs post if it works out ... Dishwashers

The Bosch plastic push button (AP2804452) has broken on my SHU9950 dishwasher. The switch itself is still good. I have removed the broken pieces of the bad button from the unit and am now depressing the switch without the button. When I get the new push button, what is the proper way to remove the control panel cover to put the new button in place? Thanks!


... Dishwashers

Ariston LS620A When running my dishwasher the dishwasher tablet is not disolving and entering the system. The dispenser is open but the tablet is stuck there??? I have cleaned the removable parts from the bottom of the system and put a new tablet in but the same problem happens again. This time when removing and cleaning the parts at the bottom there is water present and it hasn't drained is that normal? Or are there other parts there I have to remove....I have tried but nothing seems to budg


Hey, I experienced the same problem and I realized it happens when you block the water from the dispenser with a dish. Make sure that it is never blocked and the dishwasher is going to work fine ... Ariston Technologies LL64WNA Built-in Dishwasher

I have purchased a repalcement detergent dispenser-assembly and do not know how to take old one out and relpace with new part. The new part has a face plate that snaps on to the screw mounted base plate assembly which attaches to the door. I need to know how to remove the old dispenser and install the new dispenser without breaking parts and scratching the door. Is there a schematic or exploded repair view I can check out or even written directions?


Hello\015\012& Welcome to FixYa\015\012\015\012To replace the detergent\015\012dispenser you can check this video. The video gives you step by step\015\012instructions:\015\012\015 ... KitchenAid 24 in. KUDP02FRSS Stainless Steel Built-in Dishwasher

DIHR model DS50 no instruction on how to operate the dishwasher and can't get it to go through it's cycles or instruction on electrical hookup . had electrition wire it but he wasn't sure it was right because no instructions Bought it new but when they deliver it there was nothing but the dishwasher .I can't get them to do nothing to help me.So I have a dishwasher I can't use.


... Dishwashers

Whirlpool DU920PWKB0 Dishwasher We may be in need of a lower dishrack assembly. I noted that this part does not come with the pressure cone. How can one remove the pressure cone from the old rack to insert in the new? I don't want to break it. (Even if I ordered a new rack and a new cone, I'd still have to insert it -- a round part in a square hole.)


... Whirlpool Dishwashers

Unable to fit new door panel to front of dishwasher. Have removed old one with great difficulty and now cannot figure out how to get new one on. Have placed the fittings from old door onto new one in exactly the same place but am baffled as to how it attaches. HELP!


Im not sure what new panel you are trying. But if you can still get the old one back on, you can get different panels, color, and designs from applianceart.com. they also custom cut stainless panels to fit or they have a stainless foil that can cov ... Whirlpool GU2400XTP Built-in Dishwasher

Miele intake light on since new sink,disposal installed


Www.electrolux.com.au/.../Dishwashers/EX600%20-%20Installation%20Instructions.pdf \015\012\015\012\015\012\015\012Ok please go to this website above, it shows you how the hose MUST go, it MUST be Raised in ... Miele Touchtronic G892 Built-in Dishwasher

My new Dishwasher Won't Drain, ehat to do? I have a GE model GSD2300N00WW dishwasher. A few days ago we noticed that it isn't draining. This dishwasher came installed in our new doublewide mobile home. There is no disposal, the drain hose isn't clogged, there is no air-gap installed, and the sink drains just fine. I have removed the filter and cleaned it (wasn't really dirty). Does anyone have any ideas?


... Dishwashers

No Instructions Hi I have just moved in to a new house which has a dish washer, I have no instructions how to use it, also I have never owned one before, there is no identification number on the front only BOSCH.


Hi there!\015\012\015\012Don't worry, it will be your new best friend.\015\012\015\012All part numbers will be on a label on the back, but there is an easier way.\015\012\015\012 ... Bosch Dishwashers

Baumatic DW9 Just moved into a new property & have no instructions for this appliance. Managed to get it working once but now seems stuck on 'P7' but doing nothing! Any advice on how to get instructions?


Hi - You can download the manual by clicking the link underlined in blue below:\015\012Baumatic DW9 ... Baumatic 23 in. BDW9 Built-in Dishwasher

I have just been given a new world dishwasher but donot have instructions can i get an instruction manual?


Not fixed not a problem just wanted an instruction manual ... Dishwashers

Just installed a new Hot Point dishwasher.Mo #HDA2100N10WW. I AM HAVING PROBLEMS GETTING THE WATER TO DRAIN OUT. THE OLD MACHINE WOULD DRAIN FINE. IS IT POSSIBLE I FORGOT TO REMOVE SOMETHING ON NEW DISHWASHER?


Remove the drain hose from the sink and see if it will drain into a pail, if not then you have a problem with the machine that is covered under warranty ... Dishwashers

I have a GE Dishwasher model #GSD4134Z02WW. I am trying to remove the lower spray arm. Mine is cracked. There are no screws or bolts holding the arm in the dishwasher that I can see. The new piece appears to have threads on it as to indicate that you would just screw it in place. The old piece doesn't screw/turn. How do I remove this piece?


Whack it with a block of wood and a hammer ... Dishwashers

I have a MDBH945AWW that is just over one year old. It has just started making a various new noises. Grinding, loud buzzing and such. Still cleaned the dishes and completed the full cycle. I followed the solution that bgreenatown gave for removing obstacles. Found some soft material but did not seem that it would cause an obstruction. Removed it and put it back together but it is still making noises. Any next steps?


Hi,\015\012This soound is from the pump assembly. Looks like the "CHOPPER ASSEMBLY". Try to pull the pump apart and take a look.Go to www.sears.com and put in your model number, ... Maytag MDBH945AWW / MDBH945AWQ / MDBH945AWB Built-in Dishwasher

BOSCH DISHWASHER,MODEL# SHV99A13UC19, I HAVE NO PROBLEM REMOVING THE EXISTING DISPENSER, HOWEVER INSTALLING THE NEW MUST REQUIRE A TOOL TO PULL IN THE NEW DISPENSER COMPRESSING THE GASKET SO THE CLIPS HOLD INTO PLASE. I NEED ANOTHER 1/16 OF AN INCH FOR THE LATCH ON THE CLIPS.


Put the new one in a cup of hot water for two minutes to soften up the gasket then quickly install it while it is still flexible. ... Dishwashers

I have a pressure washer with a faip 3 piston pump. the other day i was using it and it stopped unloading. i cleaned the unloader and it didn't help. I bought a new one and it still won't work. I e-mailed Ryobi and they will not respond. There were no instructions on installing and adjusting the unloader. Could you give me an idea how to install and set up the new unloader. Any help would be most appreciated.


I think your main problem is that the unloader valve needs to be lubricated. Use the very best water resistant bearing grease you can find. If you can e-mail me a pic of your unloader assembly I can try to explain how to set it up. [email protected] ... Honda Pressure Washers

I have a GE dishwasher (GSD4020Y70BB) new in 1996. I replaced the whole motor assembly in 2007, seal was leaking. My dishes are not getting clean now, dried food left on plates, coffee stains in cups not being cleaned. I removed main spray arm, found nothing, turned washer on and plenty of water gushing out. I took the cover off sump all clean. I removed the filter screen in the back, there appears to be a valve with some soft rubber around it. Water gushes out of this, does stop during the cyc


Have you checked the drain pump impeller and drain hose? I am curious if there is a back siphon from the drain hose or the waste outlet at the garbage disposal might be blocked or plugged with food debris.\015\012I wou ... Dishwashers

I would like to remove the Accumulator assembly. looking for instructions on how to remove. I think something is jammed in the motor gears etc.


Thank you for the reply. This is a pretty simple procedure. Just follow these steps:1. Remove the lower wash rack and lower spray arm.\015\012\015\0122. Remove the upper wash rack and spray arm.\015\012\015\0123 ... Dishwashers

My SGS55M72AU/65 does not get rid of its drain water, although that wee pump in the bottom is clearly working (which I could see after removing filters and pump cover). There is no blockage near the drain pipe connection, so I infer there is a blockage somewhere inside the dishwasher, in a place I can't get to without further instruction. I've removed most of the drain water and pulled the unit out, so I could lay it on its side and start taking screws out. But I much prefer to have some guidanc


Ok i am attempting to help you although i dont see your make of dishwasher but im using what i know without manual. to ensure there is a blockage in the dishwasher remove that hose you checked at garbage disposal or vent and leave it disconnected an ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0876 seconds