Having problems with your Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher ?

Will I be able to switch of the flood alert or would I need an engineer?


Answers :

Nope sadly not ...you can just soak up the water in the base and that should enable you to start a wash again but it sounds like the motors to the lids need replacing you can get a set for less than £30 and they are really easy to fit. Your lid motors are not closing the lids onto the top of your tub and this is letting the water spill over the edge into the base activsting the flood switch.
\012
\012Hope this helps
\012
\012P
Repair Help & Product Troubleshooting for Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Will I be able to switch of the flood alert or would I need an engineer?


Nope sadly not ...you can just soak up the water in the base and that should enable you to start a wash again but it sounds like the motors to the lids need replacing you can get a set for less than £30 and they are really easy to fit. Your lid ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

I have an indesit IDL 735 dishwasher and the on/off switch is not working. I use to be able to stick a cocktail stick to hold the switch in and then it would work but even that has stopped now. Do I need a new switch or is it the whole board?


... Dishwashers

Belling IDW 450 Faulty on/off switch Initially the dishwasher wouldn't switch off but still functioned ok Now the dishwasher won't switch on What parts do I need to buy and would I be able to fix it myself


The astix light keeps flashing ... Belling Dishwashers

Getting an F1 code. Online search indicates I need to call in a technician because Flood switch has been activated. No water leaking anywhere. Is there anytihng else that would cause this code to appear?


Yes, we had this problem until we started using the high efficiency detergent. If you put to much in, it will overflow and cause the F1. You can fix an F1 by taking out the bottom drawer (unplug first) and drying out the control board (it is under ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

I have an f1 fault on the display of the dish drawer dd-603ss which i believe is the flood switch activation would you be able to help me reset it


F1 is the flood code, first thing you have to do is dry up the base of the dishwasher. then you have to find out where the leak is coming from and resolve that issue. you should also replace the mains filter board at the same time. ... Ariston Technologies L63SNA Stainless Steel Built-in Dishwasher

Fisher-Paykel DD603 DishDrawer shows F1 fault code. The Flood Switch has been activated. I need instructions on how to re-set the flood switch. I have two drawers that are possitioned one above the other and the are both giving the error of the activated flood switch. Any advice or instruction is greatly appreciated.


Fisher-Paykel DD603 DishDrawer shows F1 fault code. The Flood Switch has been activated. I need instructions on how to re-set the flood switch. I have two drawers that are possitioned one above the other and the are both giving the error of the activ ... Dishwashers

I recently had the e4 error code on my new world dw60 dishwasher. I have since opened it up and replaced the heater element, which appears to have resolved that issue. However, in the process of doing this I incorrectly installed the flood switch back into place, meaning that it was in its closed position (i.e. the position it would be when activated by a flooded base) when I went to turn the dishwasher back on. I have since opened it back up and correctly installed the flood switch, but I ca


... Stoves 27 in. DW60 Built-in Dishwasher

Hello, I purchased a Kitchen Aid Architect II series KUDSO3FTPA3 ~ two years ago. It is deigned so you can put your own panel on it. Duw to a design issue with my cabinets I was not able to add my own panel and wanted to purchase the stainless panel to cover the front of the dishwasher. Kitchen aid was no help, they sold me a panel that would not fit and then would not take it back! Then they said I would need to replace the entire door for $389.00! I need to know if there is a stainless


There is a MUCH better way! go to www.applianceart.com, these guys have tons of panel options including stainless and fax stainless that was featured on HGTV and the Today Show. www.applianceart.com (Appliance Art) ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

Got a Indesit Di620 Dishwasher that trips RCD after power up & immediateley as you shut door.Fault is definately related to pressure switch, disconnected pipe to switch and then able to start cycle, without tripping, small amount of water out of pipe,but cycle only lasts for a few minutes, then stops. ( blowing into pressure switch trips rcd )How can i test switch, or is it a water level problem ??Any help would be good, thanks S.C


... Dishwashers

Fisher Paykel Dish Drawer flood alert switch


Switch the main power off and on after a short time. If the error does not go away then you have water collection in the base of the dishwasher under the drawer.\015\012\015\012Take the bottom drawer out and try to use a couple of towels ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Blanco BFDW6 dishwasher drains and sounds like it is going to start but stops after 2-3 seconds. Yesterday it was playing up and made a fairly small puddle on the floor. Electrics seem to have been a problem from early on as after a few months it would let me open it during the beginning of the cycle to add items without needing to restart program. I am not sure if problem is electric (may need a reset?) or due to anti-flood feature.


... Frigidaire 24 in. FDB126RB Built-in Dishwasher

I would like to get a user manual for LG dishdrawer model DD603, Australian model. Failling that what I really need to know at present is how to use the lock button - just pressing it doesn't seem to work. I need to be able to stop my toddler starting and stopping the dishwasher at her own whim! The front display has three buttons, 'power', LED display then 'Start/pause', & 'lock'. Thanks Shelley


Opps wrong make & model. Searched for fisher & Paykel and found what I needed! No longer need a solution. ... LG Dishwashers

Hi i have a technik dishwasher it has flooded the kitchen, i managed to get all of the water out of the machine but now the pump seems to be running all of the time, someone has told me there is a flood switch on the wachine that will need re-setting but i can not find it can you please help me please either email me or ring me on 07875666327 uk number. many thanks chris


Drain pump is running all time because there is water in bottom tray. tilt machine back to 45deg and water will flow out. otherwise, take front panel off and mop water out. alll that is required to reset flood switch is to get rid of the water ... Tecnik Dishwashers

E3 Error Hi My dishwasher is showing error E3, which the user manual states "The appliance is not able to pump out the water.", however, other E3 error states a heating issue. The dishwasher does in fact heat the water but generates the E3 error after 10 minutes or so, then pumps out the water from the dishwasher. I'm a little confused as to what the issue is here and what part I would need to rectify the problem. Any advise you could give would be greatly appreciated. Kind regards


The E3 error is a result of water temperature not getting to a nominal value within a particular time. This could be caused by several factors like heater faulty, wash pump not working well, wash arms not circulating water as required. Need model nu ... Smeg Dishwashers

I have a Miele 24 in. G638 Plus Free-standing Dishwasher which is leaking into the pan underneath the machine (and triggering the polystyrene float switch) I am almost certain that the leak is coming from the main pump seal. Is it feasible to replace the seal (it looks like a major job to take the pump assembly apart). I guess Miele labor charges would make the repair not worthwhile Is there a service manual for this machine. I guess I would need it


Hi\015\012\015\012Please check the bellow link to have a detailed view regarding your query…..\015\012http://www.appliance-r ... Miele 24 in. G638 Plus Free-standing Dishwasher

I need retainer clip 912681 for Maytag dishwasher. I am a 90 yr old woman. Would I ge able to insert it in the arm, if it were available


... Whirlpool Dishwashers

Drain pump The drain pump is running continuously. The instruction manual says the anti-flood system has been triggered, and I should switch off and contact AEG. Is there anything I can do? I am a qualified engineer. This happened once before and the techbnician apparently solved the problem very quickly (I wasn't at home) and charged quite a lot! Kel [email protected]


Switch off at the mains. Take a side panel off and tip your dishwater over 45degrees towards th open side. Make sure you put towels down to soak up the water that will come out of the base. This will reset the flood detector. Reassemble. Switch ... AEG 24 in. Favorit 40260i Built-in Dishwasher

So I found this power washer for sale. The seller claims that the washer generates a good stream of water, not just full power. He also mentions that after a few minutes the engine starts to bog down like it is working extra hard. Does this sound like a pump issue? Could something be clogged or would the pump need to be replaced? Or should I avoid this power washer?


Don't buy a power that doesn't work.There are many expensive parts on a power washer. If it was cheap and simple to fix, the seller would fix it and the washer would not be for sale.Would you buy a car that doesn't work? Especially ... Pressure Washers

Own a KitchenAid dishwasher, model KDC-21AD. Unit stopped shortly after startup cycle began. When cycling thru the various wash cycles, I hear a slight hum when selector switch is at the "pots/pan" selection. About 2" of water is standing in base of dishwasher and it will not start. Checked the KitchenAid site and they do not list my dishwatcher. Would like to be able to repair myself or have it done at reasonable price.


... KitchenAid Dishwashers

Hi Hobart Model H50SU-DW. We cant seem to be able to pump out the water. I think we need a maintenance check and would like to know who will come and service this dishwasher in our area. Tarneit, Victoria


... Hobart Dishwashers

Have never used our dishwasher. It has a strange smell so I would like to use it now to clear up the scent, but I'am not able to get it running. Should there be an on/off button or maybe a switch?


... Whirlpool DU840CWD Dishwasher

Dishwasher leaking we replaced the float switch. It is still leaking. Is there a valve that needs replaced? Would like to fix ourselves instead of paying $129 plus parts.


Try checking the rubber door seal if it is not sealing properly dish washer will leak just below the door it is easy to replace and not that expensive ... Kenmore Dishwashers

Hi there I purchased a Simpson Riviera 966 Dishwasher about 10 years ago and was very happy with it. All of a sudden water was flooding the kitchen from somewhere under the dishwasher, and not having the money to repair it at the time, it has just been sitting, and possibly the seals may need replacing. All electronic funtions seem OK on it however. Would it be possible to give me a quote on repairing the dishwasher - I HATE washing up !!!! My name is Hartley Cowderoy, and I Live at 65 Rosemount


... Dishwashers

My Karcher (K2.26M) pressure washer is leaking water from the ON/OFF switch and the bottom. Does anyone know what could have broken, and what part I would need to fix it?


I have had a dozen of these units, My advice is not to bother trying to get parts or fix it. Its designed to be a throw away unit! ... Karcher K2.26 Electric Power Washer

My KUDD01DPPA KITCHEN AID DISHWASHER BOTH TOP AND BOTTOM DRAWERS have red lights on in the front and the pumps keep pumping . Is there a flood switch that needs replacing? im a plumber by trade. So im very capable of replacing any of the parts.


... KitchenAid 23 in. KUDD01DPPA Stainless Steel Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1175 seconds