Having problems with your Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher ?

I get a quick beepbeepbeep when I press the start button. As if the drawer were not completely closed but the drawer is closed. Then, nothing, the display just shows the length in minutes of the selected wash, as if it's ready to go. .


Answers :

Check if the lock is not enabled. Do you see a key symbol on the display? press lock button for 4-5 secs to disable.
\015\012It is possible the door close sensor is faulty.
Repair Help & Product Troubleshooting for Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I get a quick beepbeepbeep when I press the start button. As if the drawer were not completely closed but the drawer is closed. Then, nothing, the display just shows the length in minutes of the selected wash, as if it's ready to go. .


Check if the lock is not enabled. Do you see a key symbol on the display? press lock button for 4-5 secs to disable.\015\012It is possible the door close sensor is faulty. ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Electronic control pad is pushed for quick wash and the LED display would show 52 minutes. Now when it pushed the display shows 17 minutes and performs all the functions that would occur at the end of a normal cycle. Can set for the longer wash cycle 94 minutes and performs all functions start to finish. Think the control board is bad any advise.


... Maytag 24 in. DWU9902 Built-in Dishwasher

1991 model 665.1691591 shows cycle and options on display but when you push start just beeps twice and does nothing. When you push cancel/drain it shows two minutes on the display and does nothing. Tried turning off breaker to reboot...nothing.


My 665.1691591 was exhibiting EXACTLY the same symptoms. It was a bad door switch. This machine is a bit unusual in that it has 3 door micro switches.Whirlpool part number 431823 repaired my machine. It comes with illustrated directions. ... Kenmore Dishwashers

I have a two drawer Fisher and Paykel dishwasher. The lower drawer initially displayed an F1 and now shows nothing. It does not currently display a message even after starting it. It does not appear to engage at all - no water is released into the washer.


Hello,This is a flood error code. The bottom drawer needs to be removed to dry up the water. The video below explains how to do this. It's actually pretty easy. ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Fisher Paykel DD603 Problem. Top drawer shows F1 and pump runs continuously. Lower drawer does nothing, no display. I think the Electronic Controller in lower drawer is fried and maybe the Mains Filter Board. Please help.


Yup, definately the bottom drawer controller, for some reason you can run a DD603 with no board in the top, so long as you have a board in the bottom, but not the other way around. This is the fault you get, constant F1 from the top drawer. If you ar ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Frigidaire PLD2855RFCO starts to run, runs for a few minutes, but then does nothing. It shows the washing light, but also the clean & sanitized lights are also on. It dispenses no soap, nothing.


Normally, when the lights come on in an out of sequence manner, it indicates the board will need replacement. I have seen it time and time again. Once you have access to the board , quote the numbers written on the board and the washer model so you ... Frigidaire PLD2855RFC Dishwasher

I have a Kenmore Ultra 15895 or 15891. It fills with water then doesn't run. It will continue through it's cycles, but stays full of water. If I hit cancel before it completes the cycle, the number 2 shows in the display and nothing happens. If I let it complete the wash cycle, it will sometimes start and wash properly.


HI. The culprit will be the main control sector. This control fault may possibly be corrected by initiating a hard reset. the logic chips are scrambled, and this damage may be correctable by simply unplugging, or shutting off the appropriate circuit ... Dishwashers

Bosch SHE44C02UC digital display shows longer time for regular wash than power wash


Sadly enough, same problem. looks as though micro processor is defective. ... Bosch 24 in. SHE44C02UC / SHE44C06UC / SHE44C07UC Built-in Dishwasher

My Frigidaire dishwasher PLD4375RFC0 won't lock so it won't start. I select the normal wash and start and close the door and the led light shows the minutes but it doesn't lock and after a few seconds the led light goes out and nothing happens.


... Frigidaire PLD4375RFC Dishwasher

My Frigidaire Dishwasher PLD4375RFC is showing 3 blinking lights at the same time when I flipped the power at the circuit breaker off-on: High Temp Wash, Air Dry on the touch pad and PF on the display. It would not respond to anything that I tried. All blinking lights are off and machine does nothing when I open and close the door. Flipped the circuit breaker off-on again to repeat the sequence. I replaced the controller board, as recommended by the appliance guy since he checked and said ele


... Frigidaire PLD4375RFC Dishwasher

I have a d3530 asko dishwasher and after a few minutes in to a normal wash it stops and the lcd displays shows "water outlet fault" i have cleaned the filters and checked that the impeller rotates and i have blown air back in to the d/washer from the water trap and the d/washer outlet hose. i


... Asko 24 in. D3530FI Built-in Dishwasher

The dishwasher will not do anything. The normal wash cycle led flashes and the lcd display shows --. I have reset the breaker and tried to reset the dish washer and still nothing.


What does the lcd show it says this -- in your post ? or is that all it shows is two dashes first thing to try is hold the cancel button for 5 seconds and then message me back with what the lcd shows i await your reply Thanks Rick ... Whirlpool 24 in. GU3200XTP Built-in Dishwasher

My Maytag dishwasher model MDB600AWB, serial 18721619CN Quiet Series 300 will light up on the panel except for NORMAL WASH and START. It will not run. All other buttons work. It displayed the number 9 and the RINSE ONLY light came on after we got off the phone with Maytag. Initially nothing would light at all. We changed the fuse (it is NOT on a breaker) and it again didn't light. A few minutes later it did light the above mentioned buttons.


... Maytag Dishwashers

On the display is a flashing CL, according to the manual the latch is not closed. Tried several times to close the door and push the normal wash button. Nothing happens, only the CL light is on. Tried to unplug unit for 30 minutes, the same.


Hi\015\012\015\012Error CL appears when the dishwasher control detects door switch is open or door is open. You'll have to open the door and check the continuity of the door switch. If the door seems to be closed then it is the control ha ... Frigidaire PLD2855RFC Dishwasher

Have a 665-16293201 dishwasher with electronic controls and smart sensor. Approx 10 years old in great shape. it just started having a problem - it takes a long time for the sensing to be completed at the start of a wash and then the washer will start and display a time - like 92 minutes - turn the sensing light off, then start to wash and count down. when it gets to 86 minutes, it starts to sense again and will continue washing while displaying 86 and with the sensing light on. It will keep


... Kenmore 24 in. 16293 Built-in Dishwasher

Hi There, I have a F&P 918td dishwasher which has stopped working. Whenever I press any of the buttons I get 5 very quick beeps and then nothing - no error message, nothing the display is blank. If I turn it off at the wall and then back on again the display briefly shows two characters that do not show up in the manual as valid errors. Any ideas anyone?


Sounds like a fried board. ... Dishwashers

When I press the start button, Bosch dishwasher (model SHY56A 05UC) just keep running the motor pumping the water out of dishwasher, irrespective of: 1) the wash cycle it is on, 2) whether the door is closed or open, 3) whether I cancel drain cycle, as told by Bosch Cust Svc in following steps: - "Cancel Drain" by pressing 'Quick Wash' and 'Regular Wash' buttons together for a minute until it shows 0* - Shut power off for a minute and wait for a minute - Restart on Quick Cycle. Paid


What is happenig i believe and has happened to me 2 times is that the water level float that is on the left side of dishwasher is stuck.\015\012\015\012Either remove side panel and flick lever or pull dishwasher out and tap lower portion ... Bosch SHY56A02 / SHY56A06 Built-in Dishwasher

Maytag mdb6601aww push normal wash button-- nothing happens. push other wash cycles, the lights flash about 30 times then stop-- then nothing happens. tried clearing codes. hi temp wash then heated dry , hi temp wash then heated dry. same problem. also tried normal wash then heated dry 3 times in 6 seconds--- same thing. also tried unplugging unit waiting 10 minutes with no luck. thanks


... Maytag 24 in. MDB6100A Built-in Dishwasher

FGHD2433KFI ER Multiple lights go on when choosing the wash cycle. Quick wash is brightly lit but heavy wash is less bright along with air dry. When Start is pressed display shows delay/50/S. After 10s or so the display goes off and the dishwasher doesn't start. The same thing happens if I try Quick wash again.


... Frigidaire Dishwashers

My dishwasher is flashing the clean green light, however it shows it has 2 minutes remaining from previous cycle, i have let that 2 minutes run throught, but it then show up again as 2 minutes left, but still flashing clean, and i can not cancel to staret new wash cycle


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks\015\012for using FixYa. If the clean light flashes 7 times, pauses, and then repeats. When\015\012the dishwasher doesn't sense a ... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

Kenmore 665.15912001 DISHWASHER RUNS BUT DISPLAYS ERROR MESSAGE Instead of displaying the number of minutes in the cycle when I push the cycle selector button and then the start button, it starts as soon as I push the cycle selector, without waiting for me to push start; meanwhile, it displays "_J" instead of the number of minutes in the cycle. It washes the dishes but not well, lots of food debris. Some people in this forum have described running a diagnostic on this machine; how do you do that


... Kenmore 15912 Built-in Dishwasher

Hello, I had a problem with my Bosch dishwasher not washing properly. I have fixed burnt out wires, replaced the water inlet valve, AND tested with a new control module. Nothing is helping. When I start the cycle, it completes the initial drain and water does flow into the unit for about a minute, maybe a minute and a half. I can hear the clicking of cycle changes but it is not washing. Eventually it will drain the inch or so of water in the bottom, but it never washes. Any help???


Hi,\015\012\015\012Welcome to Fixya.\015\012\015\012Can you hear the wash motor humming ? I`ve got a "pdf" I can send you regarding this if you want to contact me at ... Bosch SHU9925UC Built-in Dishwasher

My electrolux ultra silencer 8kg EWF 1495 has been working since purchase some months ago. yesterday when i tried to put a wash on i turned the dial and nothing lit up or was displayed on the display panel. the washing machine is plugged in at the wall and switched on but does not register being turned on from the dial.


... Dishwashers

Kenmore Elite Drawer Dishwasher model 465.13329600 Normal Wash and High Temp Wash buttons stay lit, as does green Lock button. The Start/Resume button and the red button on the front of the drawer keep flashing. I've tried key combos suggested above, but nothing seems to work. Even tried shutting it off at the circuit breaker to reset it, and that didn't work either. This ****** was purchased in 2006 or 2007, and hasn't been used very much. WTF?


... Kenmore Dishwashers

KUDU03STSS2 The dishwasher won't start and you cannot select a cycle. Hiting cancel twice will turn a small steady light on in the time window were the spining light normally is before a cycle starts, at which time closing the door will drain the dishwasher. Tried using the reset combos: hot wash, heat dry, hot wash, heat dry - all lights came on but nothing reset. Also tried same sequence doubling the heat dry. Unpluged for ten minutes, still nothing. Can select rinse, but unit does not start,


... KitchenAid Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1382 seconds