Having problems with your Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher ?
My fisher and paykel dishwasher makes this weird noise like its crushing ice.. has anybody else had this problem?
Repair Help & Product Troubleshooting for Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
My fisher and paykel dishwasher makes this weird noise like its crushing ice.. has anybody else had this problem?
... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher
Motor problems? I have a fisher paykel DS6031SS -top drawer dishwasher that the motor makes a loud sound when cycle first starts. Sound seems to be coming from the front of the dishwasher. It is 7 years old. Anyone else have this problem? I llive in a small town in Washington state (Lacey) and have been told the closest place to get parts is Seattle! Thanks.
... Fisher and Paykel DS603SS Stainless Steel Built-in Dishwasher
Hello I have a Fisher & Paykel dishwasher, model DW681ES. The problem is that it stops in its cycle. The reset button keeps flashing. I open the door and there is water at the bottom. It will not drain away. Is there a way to reset the system? Is there something else I can do?
Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks\015\012for using FixYa. If the cycle doesn't complete, then the first thing\015\012that should be checked is the Timer and then ... Dishwashers
Kenmore dishwasher I have a kenmore dishwasher and in the middle of a cycle all my front panel lights went off. I have checked the power going into the dishwasher it is fine. I also checked the door latch it is fine. Not sure what else to check? Same exact problem model number 665.15934 We have had nothing but problems with all of our sears products - highly suggest to SHOP SOME WHERE ELSE before you get stuck too.
Check the continuity of the thermal fuse (part # 8193762). It's clipped onto the electronic control inside the console.Let me know if you need more help. ... Kenmore Dishwashers
Dishwasher Problem... Hey, I'm sorry I can't seem to find this information anywhere else. I'm having a similar problem with my dishwasher (also a kenmore quiet guard) and I wanted to try to clean the filter. I'm not sure how to remove the lower arm of the dishwasher. There is a kind of plastic-screw in the middle of the lower arm, is that what holds it on? I'm afraid to try twisting it because I don't want to break it. How did you get it off of yours? I hope I'm not bothering you! Thank you, Je
You are right. The plastic screw needs to be removed. I have a Quiet Guard 4. My procedure is as follows:\015\0121. Remove baskets. Need to pop off the 'keepers' at the ends of the top slidding shelf supports.\015\0122. Remove bott ... Dishwashers
KUDS30IXBL My dishwasher stops mid cycle. Technician said it was too many suds and cutting off. I use cascade and jet dry and nothing else. There has been no other soap in the dishwasher. After it cuts off on normal (soap dispensed) I restart on light/china with no detergent. Sometimes it runs through with no problem and sometimes it stops with all lights off. Any suggestions? I have already had technician out twice for other problems with this dishwasher that is only 2 years old and don
... KitchenAid 24 in. KUDS01FLBL Built-in Dishwasher
Bosch HydroSensor Dishwasher (SGS5342GB/17) - cleans dishes but constantly leaves a gritty residue in cups, glasses and now on plates. I have to rewash items and the problem is getting worse. I have cleaned filter, topped up salt and am now stuck as what else the problem could be. The dishwasher was here when we bought the house (2 years ago). Any ideas? Thanks
Hi Julie,\015\012\015\012The sprayer arms may need replacing. ... Bosch Dishwashers
II HAVE A KITCHEN AID DISHWASHER MOD#KUDP01LWH1. THE DISHWASHER TAKE TOO LONG TO RUN THE CYCLE. I FOUND OUT THAT THE ELEMENT DIDN'T WORK, I REPLACED THE ELEMENT STILL THE PROBLEM THERE. WHAT ELSE COUL BE THE PROBLEM
... KitchenAid Dishwashers
Dishwasher Dilema Hi, Can someone help me solve this problem. Last time I had a problem with my dishwashers I was pretty successful in solving it on this site. I was running a reg wash on the top drawer of my Fisher&Paykel when I suddendly had to stop it in the middle of a wash to add more dishes (something I do all the time) suddenly both screens started beeping with an F1 along with a wrench. It sounds like both motors top and bottom are running full blast. I tried shutting the power for a few
You need to remove the bottom drawer and dry out the water with towels and a hair dryer when this is done it should operate normally. most likely when you pulled out the drawer the water sloshed back and out of the drawer making the dishdrawer think ... Fisher and Paykel 24 in. DD603H W Built-in Dishwasher
F9 problem code Fisher and Paykel Dishwasher - Soft Touch
That's an electronics failure code. Bad news. http://www.advantagesupplyfl.com/FisherPaykelDishwasherFaultCodes.html ... Fisher and Paykel 23 in. DD-603 Built-in Dishwasher
I have a single draw Fisher and Paykel dishwasher. I stupidly put washing up liquid in the dishwasher which resulted in a F1 problem. Water started leaking under the draw and onto my floor. I turned the dishwasher off at the power point and have cleaned up the leak. Have I damaged my dish washer? How do I fix it?
Ok , F1 means your flood switch has activated, which is underneath the drawer. now they show the F1 fault because of 2 reasons.1st there is still water underneath drawer causing switch to activate. 2nd your activator board which has the flood switch ... Fisher and Paykel 23 in. DD-603 Built-in Dishwasher
Dishwasher problem this dishwasher is stuck in the clean mode and will drain but will not do anything else. It just flashes clean and will not kick into start mode. Do u have any suggestions on what I should do.
This is a common problem indicating a heater fault. could be heater or thermostat or neutral switch in the door handle failure. remove kick plate and find diagnostic sheet to direct you w/ wiring diagram to trace this down ... Dishwashers
I have a Whirlpool dishwasher, model DU943 that's under 7 years old. I went to use it last night and it won't power on. I tried selecting all of the cycles, but the dishwasher never came on. I looked through the troubleshooting tips in my manual (like checking the circuit breaker for a tripped fuse, which was fine) and I still have a problem. what else can I try? thanks.
Hello- This unit has a thermal fuse inside the door panel on the control. This part is replaceable. If it is bad, replace.- and would suggest not using heated dry as this is most common cause of fuse failure. Let me know if this info helps- have more ... Whirlpool Dishwashers
Water comes out the top of the aeration spout into the sink. Dishwasher still works, but this doesn't seem right. Cleaned drain filtered at bottom of dishwasher, but problem continues. Is there a clog someplace else in the system?
Hi yes your aerator seal is probebly bad on your sink ... Kenmore Dishwashers
The adapter on my maytag portable dishwasher comes off the faucet when I try to run it sending water everywhere! We JUST replaced the adapter and hoses, $50 and not the problem. It seems that the plastic pieces (not metal balls) are wearing out as soon as they're used. Does anybody know what I can do or if that isn't the problem, could it be that I have the wrong end on my faucet????? HELP!!
If you just replaced the connector and it won't stay on, replace the adaptor on the faucet. ... Dishwashers
I have a Bosch SMU2046UC/14 dishwasher that makes some noise but will not start the wash cycle. I found that the noise was from the timer motor by removing the front of the door. The timer continues to run and but only advances until half way through the wash cycle where it stops permanently. Is this a problem with the timer or could something else be causing this problem.
HI. The timer motor mechanism regulates the length of time power is to be routed to each component. If the timer motor does not advance properly, it can result in a wide range of problems. Common symptoms will usually include sticking in a cycle(fail ... Bosch 24 in. SMU40 Built-in Dishwasher
I am having problems with the bottom drawer not draining in my Fisher Paykel dishwasher. How do I drain the water? the last time a repair man came for this same problem, he was able to punch the keys in a certain order to get it to drain.
You can do 2 things: If this problem persists it means that the "flap" that prevents the water from draining into the drawer needs to be replaced, unfortunately this is a common problem with this model if you are a frequent user. In the meantime wha ... Fisher and Paykel 24 in. DD-602 Built-in Dishwasher
I have ge dishwasher thats 3 years old and I'm having problems with it leaking from the bottom of the door. I replaced the seal once but I can't tell what else the problem could be. Any suggestions?
It could be overfilling. check the overflow float inside. if it is stuck down, the water level will get to high. the seal is not meant to be under water. it just stops splashing water. if it moves freely, it is okay. ... Dishwashers
Dishwasher problem have a fisher and paykel nemo dishwasher . it starts beeping near the end of the cycle and wont stop , the only way to stop it is to turn it of at the wall .
I had the same problem with a fisher paykel nemo dishwasher beeping at end of cycle, as im a mechanic i was curious to pull it apart and see how it works, i pulled the main control board out and unscrewed the three screws holding it all together and ... Dishwashers
Both of the baskets are rusting and even several of the rungs have completely rusted off. This dishwasher was installed in 2003, 6 years old. Has anyone else had the same type of problem with this model? What happened to dishwashers lasting for 10-15 years? Where is the Maytag quality?
The problem is most likely due to minerals or other impurities in your water. The nylon coating covering the metal dish baskets erodes quickly from contact with this water. It is also exacerbated by the wayers high temperatures. ... Dishwashers
Our Asko D1716 dishwasher functions to fill and empty but the pump which causes the sprayers to rotate and distribute the water does not function. The local appliance repairman diagnosed the problem as a bad pump (he called it a motor). Since the pump is a $400 part plus labor, is it possible that the problem is something else like a bad motor capacitor or relay? When the cycle calls for the pump to come on, there is no sound except for a very soft hum.
Hi ! \015\012\015\012Got a D1706 ( in 2002 ) paid $1000 and as os April 2010...same problem as yours, I will trow it away ( dishwasher ) and will never buy at such cost. I'll get a GE or LG. \015\012\015\012Stupid Sweden dish ... Asko D1716 Built-in Dishwasher
Hello, My Kenmore elite dishwasher model 665.17282.400 seems to have a problem. The CLEAN light is flashing and can't do anything else with it. Do you know what thew problem is, or how to reset it. I tried cotting off the power to the unit but to no avail. Please help ASAP
Try pressing the heated wash then heated dry one after the other about 5 times. this should reset the unit.\015\012\015\012\015\012--------\015\012in some machines there is "Hi temp scrub " and "air dry" so press this ... Kenmore 24 in. 17282 Built-in Dishwasher
My Bosch diashwasher is just a little over a year old. Just recently it started leaving behind a white residue thats hard to wash off even by hand. I've always used the same dishwashing detergent (Cascade) and nothing else has changed has anyone else ever had this problem?
Hard water is the problem. go to www.dishwasherfilter.com and solve your problem once and for all. they offer a product that filters the water before it enters the dishwash ... Bosch SHX43M05UC Built-in Dishwasher
Hello, I have a Fisher Paykel Double dishwasher (DD-603) - about five years old and then top unit is literally going nuts. It turns itself off and on, beeps constantly, and will not run through a cycle. What is causing this issue and how can I go about fixing this problem?. What parts do I need to buy? How do I remove the front panel of the dishdrawer to fix this problem? Do it yourself repair instructions would be terrific.
It sounds like it needs a new computer board (the whole thing) so you cant do it yourself it needs to be orded in. \015\012\015\012If you have any questions please dont hesitate to ask ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher
I have a Fisher and Paykel Nautilus DW920 dishwasher. However, the door to the detergent dispenser does not open reliably every load -- usually I have to open the dishwasher door about 20 minutes into the load and open the soap dispenser myself. The catch on the dispenser will have released, but the dispenser door will not have sprung open. I am not sure exactly what the problem is -- the soap dispenser door simply seems a bit stiff in its holster. Given a little nudge, it springs open fine. I h