Having problems with your Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher ?

Hi, I have a fisher and Paykel double dish drawer model DD605. A couple of days ago when we opened the top drawer all the lights flashed and beeped in sequence repeatedly and would only stop when the power was turned off or the dishdrawer closed. Today I went to turn the top dish drawer on and cannot change the cycle off rinse. I can push the eco button and the rinse cycle works no problem but I cannot change the cycle. The bottom drawer is running as I write this and appears to be fine. An


Answers :

Hi\015\012
\015\012
\015\012Could you please let me know which all lights are blinking/lit solid in sequence from right to left. This could be an issue of drawer lock mechanism or flood switch issue. PLease post back with details for more information.\015\012
\015\012Daniel
Repair Help & Product Troubleshooting for Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Hi, I have a fisher and Paykel double dish drawer model DD605. A couple of days ago when we opened the top drawer all the lights flashed and beeped in sequence repeatedly and would only stop when the power was turned off or the dishdrawer closed. Today I went to turn the top dish drawer on and cannot change the cycle off rinse. I can push the eco button and the rinse cycle works no problem but I cannot change the cycle. The bottom drawer is running as I write this and appears to be fine. An


Hi\015\012\015\012\015\012Could you please let me know which all lights are blinking/lit solid in sequence from right to left. This could be an issue of drawer lock mechanism or flood switch issue. PLease post back with detai ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

I have a Fisher and Paykel 2-drawer dishwasher. The top drawer is stuck in the rinse cycle and I cannot change it to another cycle. Please advise.


Assuming the controller of the top drawer is still ok, take a clean damp cloth and wipe the top panel where the program keys are located. \015\012\015\012If nothing happens, you will have to check if the controller connector is not loose. ... Fisher and Paykel 23 in. DD603H SS Free-standing Dishwasher

Top dishwasher drawer will not drain the water and now has a setting that cannot be changed past 5 min cycle ...LED readout shows a wrench. what is the problem?


Drain pump ... Fisher and Paykel 23 in. DD603H SS Free-standing Dishwasher

Top drawer on F&P dish drawer stuck on cycle & continuously beeping


You could isolate the top drawer by taking the controller power cable out. DIsconnect mains power to dishwasher, open top drawer and remove front cover carefull after removing 2 plastic pins on each side with plier. Controller box is on left top side ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

The top drawer on our dishdrawers makes a clicking kind of noise for about the first 2 - 5 mins of being on. Then goes fine with the occassional clicking noise during the cycle. It is slightly noisier than the bottom drawer. When the cycle is finished there is a couple of inches of water left in the bottom, so the dishes don't dry properly. The bottom drawer works really well with no problems at all. What do you suggest?


... Fisher and Paykel DS605I Built-in Dishwasher

Intermitttent beeping on bottom drawer of dish washer no error code only cycle to work all the way through is rinse cycle. Have turned off power supply over night did not fix problem. When you press pause button restarts for about five minutes then beeps again. No problem with top drawer. All inside cleaned using correct powder and rinse aid.


Panel control board Call Encompass Parts 1-800-638-3328 ... Fisher Dishwashers

My dishwasher stopped cleaning my dishes when it was just under 2 years old. I hadn't changed the type of detergent, or how I loaded/ran it. We have since tried different detergents and different wash cycles to no avail. If I want to use the dishwasher, I must first completely rinse off any food--and I cannot load dishes as tightly as I used to be able to. Yesterday I noticed that a dish in the back left corner--bottom rack was completely untouched---the residue was as if I had put it in the


Hi,\012\012\012\012\012I\012have an older dishwasher also and recently my wife also complained\012about it not cleaning right... so me being the man I am tried in vain\012to clean the things... Bought new ... Whirlpool GU3600XTV Dishwasher

I have a Bosch "Classic Electronic" dishwasher that has been in use for only 18 months. If it helps - SGU53E05AU/30 is marked on top of the door.. my problem is that on the last cycle, the water won't drain so I am left with lovely clean dishes but there is water up to the drawer line present and it won't drain until the next wash. I have cleaned all the filters and ensured the pipes are not obstructed. It is odd that it only does it on the last cycle. Could it be the microchip?


Hi there,\015\012\015\012thank you for providing the model #, that helped me narrow down the troubleshooting.\015\012\015\012try the following to fix your problem:\015\012\015\012check for blockage or kink in the d ... Bosch Dishwashers

Hi, I've got a Fisher & Paykel DD603i which is very nearly 3 years old. The top drawer runs through its cycle and end with a continuous beeping, and some water left in the drwaer, although the dishes seem to be cleaned OK. I have folowed step 2 on page 7 of the manual as described in your response to a similar-ish problem, but didn't completely remove the drawer (as I wasn't sure how to get the clear plastic cover on the electrics underneath). However, at this point I had already disconnected t


Hi,Does it show Error U1 on the display. If yes, follow the below. I am hate to say, however user manual does not contain all the details.If that would have been the case, there is never a need to service manuals, bulletins or even tech's ... Fisher and Paykel 24 in. DD-602 Built-in Dishwasher

My dish drawer is stuck on the fast cycle and am unable to change cycles on control panel


Take a damp clean cloth and clean the touch panel where you set the cycle. If this does not work try turnign the mains power off and back on. I am assuming by fast cycle you mean rinse. It is likely the heater unit has a problem which the controller ... Fisher and Paykel 23 in. DS603H W Built-in Dishwasher

I have a fisher & Pakel dishwasher and it appears to have brown a fuse inside the machine which means it does not work at all and the problem occurred during the wash cycle. This means the seal (which is a top piece that's lifted and lowered by two motors. When the seal is in the lowered position it creates a complete seal but it also locks the drawer (single drawer dishwasher) so it cannot be pulled out. I repaired the dishwasher two years ago. One of the lifter motors didn't work. I replaced t


According to the service manual there is no problem in manually forcing open the drawer in the situation where the power has failed part way through the diswasher cycle.\015\012\015\012The problem is that once you force the lid open, you ... Fisher and Paykel Dishwashers

Both dish drawers emit loud wails ( almost siren like) when started. Repairmen have not figured it out. It happened in the lower dishdrawer first and the impeller was replaced. This did nothing. Now the top drawer makes even louder noise when the wash cycle seems to start.


\015\012\015\012If your dishwasher seems noisy, check these:\015\012\015\012\015\012Water-inlet valve\015\012\015\012\015\012An aging water-inlet valve can sometimes fail slowly, rather than all at ... Fisher and Paykel 23 in. DD-603 Built-in Dishwasher

Hello, I am having problems witha kenwood dishwasher, it just isn't cleaning anything. It seems to be going through the cycles and sometimes the dishes particularly in the top rack are a bit cleaner but in general they are uncleaned. There are no error codes. I wondered if the arms for some reason weren't turning correctly as some of the dishes were clean but this is inconsistent. I have tried changing detergents, adding more salt and rinse aid but it still isn't working, can you help?


... Kenwood Dishwashers

We have just installed a brand new Fisher and paykel 2 drawer dishwasher and the top drawer is not emptying all the water after the final rinse cycle. We cannot see any kinks in the drainage hose....


\015\012Make the following checks:\015\012\015\012\015\012Determine whether the washer's power supply cord is plugged into a live power outlet. Unplug the power cord from the outlet, then plug a working electrical ite ... Dishwashers

Belling IDW604 dishwasher. Accidentally openned mid cycle, could not reset or switch off. Then had power cut. Dish washer now off and cannot be switched on or activaled at all. Have changed the plug fuse but still will not work.


The one link for all the solutions just click the link and solve any type of problem in kitchen ranges.\015\012www.applianceaid.com\015\012\015\012 the link ... Belling Dishwashers

The top drawer of my FP dishwasher is not cleaning everything properly. The glasses or dishes in the front left side are always dirty and are covered with crumby dried residue when the cycle is complete. I took the wire grate out and cleaned the stainless panel on the bottom, I removed the spinning wand armature and made sure the holes were clear. It spins freely. What else can I do?


Hi If you are noticing that the dishes are not clean, then there are a few things to check for. Check the soap powder if it's kept in a dry environment. Also try replacing the powder with something like a gel or liquid. ... Fisher and Paykel 23 in. DD603H SS Free-standing Dishwasher

Top drawer retains about 2 inches of detergent water and dishes don't come out clean (sometimes). It also makes a loud noise during wash cycle. Drain hose is not kinked.


Hi,\012Here is a tip that I wrote that will help you with your dishwasher not draining problem...Dishwasher Problems - ... Fisher and Paykel 23 in. DD-603 Built-in Dishwasher

Programme stuck I can't change the programme for the top drawer of my DD603 - its on the rinse cycle and won't move to anything else. Can anyone help?


Try swapping the motor controllers (computers) over between the two drawers to see if the fault moves while doing this give the touch buttons at clean. Any questions feel free to ask. Cheers ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

All of a sudden, my dishes are not coming out as clean, especially the top rack of glasses. They have a white film on them.. I changed the detergent and that didn't help. We have lived here for 20 years and have had this dishwasher over 3 years? I feel as if the upper arm is not rotating during the cycle. Could this be broken?


There are many probable causes of failure .A dishwasher's water inlet valve is its most common part to fail. When \015\012your dishes are not being fully cleaned, quite often a faulty water \015\012inle ... Frigidaire PLD2855RFC Dishwasher

I have the two drawer model dish-drawer system. In the past the top seal leaked and since has been replaced with a new seal. Worked well for several years after but then the top drawer quit running. So we started to use the bottom drawer. That was fine for awhile althought it would pump waste water into the top drawer. Now neither drawer will work. The bottom drawer starts up and shuts down. I pulled the lower drawer and it is dry.


If your model has got an LCD display are you able to record what shows up on the display when the bottom drawer shuts down. If no display then are you able to note down the LEDs which are on inside the top of the drawer lid. It is likely there is no ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Dishwasher is stuck on one wash cycle - cannot make changes


... Jenn-Air 24 in. JDB1100AW Built-in Dishwasher

We have a Fisher& Paykel dishwasher with 2 drawers -- one on top of the other. Model DD603. The bottom drawer works fine. But the top drawer is not working properly -- it repeatedly stops in the middle of the cycle and there is water left in the drawer. Previously when this happened, we called a repairman; he removed the top drawer from the machine, said it was "off track", flipped some lever, and put the drawer back. He seemed a little embarrassed by having to charge for a service call for


Are you able to provide a bit more information on what you see when the dishwasher stops in the middle of the cycle -\015\0121 - is it displaying the time remaining in the cycle and is it always the same time?\015\0122- do you get any fau ... Dishwashers

Fisher paykel Hi I have a fisher paykel dd603 dishwasher. when I run the bottom drawer on its own ,,it also fill the top drawer with water ! so after the dishwashing cycle , im left with water in the top drawer. im guessing that a valve should close on the top drawer to stop this happening? is there a part I could order and replace myself? thanks [email protected]


Check your email ... Fisher and Paykel 23 in. DD603H SS Free-standing Dishwasher

Water is leaking from the top of the top drawer, mainly on the right side of the top drawer. Is there an adjustment to raise the tub so that it would have an even seal to prevent the water from leaking. I noticed that the top drawer has a bigger gap on the right side or has more give-in/movemenet when the tub is lifted compare to the left side. This casue the flooding error at the end of the washing cycle.


I have had similar problems with my DD603SS. The leakage leads to the water detection in the bottom of the unit and the resulting F1 error. The movement and height of the lid is controlled by the lid actuators. There is one on each sidewall. The draw ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Frigidaire dishwasher won't end cycle - will run on and on for hours. Sometimes it cycles through, usually it just endlessly washes and rinses. I have to CANCEL the cycle, which causes the dishwasher to empty and run a few RINSE ONLY cycles (which are consistent, cycle time wise) to rinse the soap off of the dishes. Also, the door for the soap seems to stick - how long into the cycle before the soap door should open? Also, does opening the washer during it's cycle (to add more dishes) change or


I would say the resettable thermostat has failed. There is a thermostat which senses the water temperature, and when it fails, it causes the dishwasher to run constant. Replace the thermostat underneath the dishwasher and that should cure problem. P ... Frigidaire 24 in. FDBB540 Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1641 seconds