Having problems with your Fisher and Paykel 24 in. DD603H W Built-in Dishwasher ?

Started by it self

\015 I just started by it self had to unplug the washer.\015\012is there anny thing that can be done /\015

Answers :

Something is wrong with the control board, replace it.
Repair Help & Product Troubleshooting for Fisher and Paykel 24 in. DD603H W Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a Kenmore 665.16039401. The 3 right hand buttons on the keypad; Delay Hours, Cancel/Drain and Start/Resume do not respond and I cannot start the washer. Doing the self-diagnostic test by pressing "Heated Dry - Normal Wash - Heated Dry - Normal Wash" results in all of the LED's lighting and the washer starting a full 20 minute self-test cycle in which all functions seems to work properly. Opening and closing the door during this testing stops and then re-starts the washer appropriately


... Dishwashers

I HAVE A BAUMATIC D/WASHER BHD5 TYPE DW-24E1,(ABOUT 8 YEARS OLD) IT IS A WHILE SINCE LAST USED THEN 1 NIGHT AS IF IT HAD STARTED BY IT'SELF IT STARTED MAKING A BEEPING NOISE ALL 4 INDICATING LIGHTS AS WELL AS SALT AND RINSE AID WERE FLASHING HAVE SINCE TOPPED UP SALT AND RINSE AID BUT ROUGHLY 1 MINUTE AFTER STARTING IT BEGINS TO BEEP AND ALL LIGHTS FLASH. COULD YOU TELL ME THE PROBLEM. MANY THANKS


... Baumatic Dishwashers

I started my dishwasher this morning. It started to fill with water, then stopped. I can hear a very slight hum sound as if the motor is running. The start/reset light flashes but does not reset upon pressing the button. Any ideas for a self-help resolution?


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks\015\012for using FixYa. This issue can be either due to a faulty door latch or\015\012door lock switch which is not engaging its ... GE Nautilus 24" Built-in Dishwasher

Started by it self


Something is wrong with the control board, replace it. ... Fisher and Paykel 24 in. DD603H W Built-in Dishwasher

DISH WASHER STARTED BY IT SELF


If the resetting at the household circuit breaker has not proven to be successful, then you would need to contact a professional to have the control board and panel diagnosed for repairs. ... Frigidaire 24 in. FDB1050REC Stainless Steel Built-in Dishwasher

I have a whirlpool (model GU2475XTVB1)that will not start. Accomplished the self-test and all lights glow, but the start/resume is dim and flickering. would this indicate a bad control panel, control


... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

Last month i was washing dishes in the dishwasher and if i remember correctly i opened the door to get a knife out of the dry cycle. i remembered shuting the door back and that is about it. this is my daughters dishwasher by the way. i left her house not noticing that the dishwasher ever finished. a week later she asked me if i had a problem with it. i told her no. when she goes to push the start button nothing happens. it doesn't restart its self. we have turned the breaker off and on


Hi.Depending on the model you may need to reset the dishwasher. Most Kenmore and Whirlpool built dishwashers for example need to press a reset button sequence to operate again after a problem has occurred. In that case you usually get lig ... Dishwashers

Diswasher will start and run for a short time but then stops,it seems to take the water in then runs short cycle then pumos the water back out and then it turns its self off


... Asko 24 in. D3120 Dishwasher

See below This is a post that I just copied to this space "I have a whirlpool Quiet Partner II, Model GU2400XTB1, that just suddenly will not start, as if the power was cut. Circuit breaker is fine. from the little Internet research I've done it looks as thou it could be a thermal fuse problem. How easy are these to replace, assuming that's what it is?" Mine is quiet partner III ... there is power to the connection box at the dishwasher it self (checked w/ light tester) ... but there is no power


Have you tryed leaving the power cord out of the socket for an hour or so sometimes they don't lose the memory until they have been left disconnected for a while ... Whirlpool GU2400XTP Built-in Dishwasher

I own a karcher water blaster 449M and needs an expert to solve the pomblem It does not bring out the presure required to the right job and makes a noise as well when you start it can someone please let help me in solving the delema my self or by repairing it by an expert I LIVE IN SYDNEY AUSTRALIA IN THE SUBERB ROSELANDS CAN SOMEONE LET ME KNOW OF A DEALER OR REPAIRER CLOSE BY THANK YOU FOR YUOR TIME AND HELP IN READING


Sounds as if you have a pump problem. your best bet is to go online to maker or a dealer near you for service help.you may wind up having to replace pump. ... Karcher 2500 PSI Pressure Washer

My KitchenAid KUDI01FL dishwasher will not start. When I run the self test all of the LED lights come on and stay on indefinitey without blinking until I press cancel. Then the cancel light comes on without blinking. What does this mean? Thanks!


... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

My lawn mower won't start - Brute 7800802 22-Inch 190cc Briggs & Stratton 675 Series Gas Powered FWD Self Propelled Lawn Mower With High Rear Wheels


... Brute 7800802 22-Inch 190cc Briggs & Stratton 675 Series Gas Powered FWD Self Propelled Lawn Mower With High Rear Wheels

Du1030xtxs1 It starts the cycle but then shuts it self off


... Whirlpool Dishwashers

I have an almost brand new husky pressure washer (one of the big ones). It has been a life saver so far. just the other day it shut its self off. its gas powered so of course i checked the gas and oil. then tried to start it back up. but when I try to pull the pull string it wont come out more than about 3 inches. i payed 400$ cash for it to use on the trucks. does anybody know how to fix that? thanks


IT SOUNDS LIKE YOUR FLY WHEEL IS BAD OR NEEDS TO BE ADJUSTED ... Pressure Washers

Kitchenaid 2 drawer model 528824. Dishwasher beeping non stop and continues to self start.


... KitchenAid Dishwashers

My amana soft and sound 1 dishwasher will not run through the cycles, it starts and the bottom fills with water, but then it turns its self off, any suggestions?


... Amana 24 in. ADB1500AW Built-in Dishwasher

Kitchenaid superba whisper dishwasher no lights wont start


... KitchenAid Dishwashers

My kitchen aid dishwasher will not start I replaced the interface control board thinking that was the obvious problem. When you go to set the dishwasher to start some of the settings don't always light up then when you push the start button the lights will flash then start but it's not flashing and won't start. I get lucky once in a while and get it to flash then start. I don't know where else to look. I don't want to start replacing parts one at a time till I get lucky. My model # is KUDIO1F


Check all cables especially the ribbon cables from the user interface to the electronic control assembly as steam from dishwashings will create small amounts of corrosion and inhibit signals to and from these 2 components,unplug each,inspect,and reco ... KitchenAid Dishwashers

The standard procedure to start the machine is to select a cycle (normal, dry heat, etc) then press the start key. Currently when I select the cycle and the cycle LED is on, pressing the start key does not start the machine. I can press cancel, then start and then choose the cycle and it will work. Also, if I first press the start key, the machine will start and the previous wash cycle selection LED will light up and that cycle will run. Do I have a problem with the keypad or the con


... Kenmore 16632 Built-in Dishwasher

My dishwasher started making a whirring sound around 20 minutes into its cycle. I took off the drain pipe to check for obstructions, however it was clear. I started the cycle from the start again, and it started the whirring sound from the start of the cycle. There was a small amount of water that drained into the bucket where I had placed the drain hose, however there was not much water in the machine to start with (I checked when it started whirring the first time and there was no water in the


Hi.\015\012\015\012A blocked pump in absence of water won't be noisy from start. Check that\015\012 the whirring sound is not given by the spray arms. Test without baskets\015\012 and check the spray arms assembly.\015\012\015 ... Fisher and Paykel DS605I Built-in Dishwasher

Whirlpool RF360BXDW how do i start the clean


... Dishwashers

My frigidaire dishwasher suddenly turns it's self on


It has a over heating fuse, that part i have figured out. As to why its over heating, thats my question. I think it has something to do with the heater its self.. ... KitchenAid 24 in. KUDP02CR Built-in Dishwasher

Kenmore ultra wash 665 dishwaser wont start. blinking light


... Kenmore Dishwashers

Hi our nemo dishwasher starts a cycle and fills but does not start cleaning cycle. Light under start button flashes. If start button is held on it resets and pumps out. We live in an area with high clacium in water. At first the machine only pumped out and did not start filling. I have cleaned the level sensor ( membrane switch filled with calcium) and it at least stopped pumping and started to fill. It does not proceed from here. I checked the level switch it seems to be working OK (NO and NC c


Hi.You need to move the appliance and check the height of the drain hose. If there is water in the tub you may have a syphoning problem (water refluxing in the tub) because of incorrect height of the drain hose elbow.The led t ... Fisher and Paykel Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0936 seconds