Having problems with your Fisher and Paykel 24 in. DD603H W Built-in Dishwasher ?

I have the DD6031 fisher Paykel two drawer dishwasher and I cannot change the settings; it is stuck on rinse. Any suggestions?


Answers :

Disconnect the power to the unit for at least 15 minutes to see if you can "reset" the unit.
Repair Help & Product Troubleshooting for Fisher and Paykel 24 in. DD603H W Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have the DD6031 fisher Paykel two drawer dishwasher and I cannot change the settings; it is stuck on rinse. Any suggestions?


Disconnect the power to the unit for at least 15 minutes to see if you can "reset" the unit. ... Fisher and Paykel 24 in. DD603H W Built-in Dishwasher

I have a Fisher and Paykel 2-drawer dishwasher. The top drawer is stuck in the rinse cycle and I cannot change it to another cycle. Please advise.


Assuming the controller of the top drawer is still ok, take a clean damp cloth and wipe the top panel where the program keys are located. \015\012\015\012If nothing happens, you will have to check if the controller connector is not loose. ... Fisher and Paykel 23 in. DD603H SS Free-standing Dishwasher

I have a double drawer dishwasher. On the upper one, the cycles jump to different settings merely by closing the drawer. On the botttom one, the setting is stuck at rinse and I can't change it(I tried cleaning the control) Any advice?


Sounds like you may have a bad unit control board with cold solder joints on it,and too you could have a high resistance ground and by merely bumping the machine you make and break these connections,check all chassis grounds and inspect the circuit b ... Fisher and Paykel Dishwashers

Further to my open question for my Asko N516 D5131 SS dishwasher I have been able to successfully press the wash setting cycle, which was before frozen on 'rinse and hold' . I then press the on/off. Button the time shows but as soon as I press it to start the dishwasher the screen changes to three horizontal curly lines and nothing further happens... It won't start. Please , I do hope somebody can give me advise. I cannot get to the power plug as it appears pot be located behind the unit whi


... Dishwashers

Describe your whirlpool du948pwpq Problem: I have a whirlpool du948pwpq dishwasher in a tenant's unit. They said the delay start button is no longer working. Also, they cannot "de-select" the heated dry option. It seems to be an issue with the electronics of the control panel. I've already tried to "unlock" the buttons - no change. I also powered off the unit in hopes of re-setting - no change. Does anyone have any other suggestions? I am hesitant to call a service person (it's out of warrant


... Whirlpool 24 in. DU948PWPQ Built-in Dishwasher

Dishwasher is stuck on one wash cycle - cannot make changes


... Jenn-Air 24 in. JDB1100AW Built-in Dishwasher

When starting my Bauknecht GSFP 5586 dishwasher the program is set for rinsing and the start light flashes two blinks, then again two blink etc. I cannot get the program to change. When I hold the Start button for 2 seconds, the progress light flashes at END for a moment then reverts back to the double blink sequence. I have checked the filter and it is well seated and clean. What can I do to start the program selection again?


Ok, so I had the exact same problem with the exact same model. NOT 7 blinks and to buttons that you do not have.\012I will tell you what I did as I do not know what (if any) of what I did fixed it (it could be luck but I do not think so).\012 ... Dishwashers

My dishwasher is stuck on quick rinse and red light indicator just flashes. can not change any settings and does not do anything.


... Kenmore 24 in. 15782 / 15784 / 15789 Built-in Dishwasher

I have a Kenwood slimline dishwasher KDW45X10 which was working fine but now when you switch it on you cannot set a program because it is stuck on delayed start and keeps constantly changing from 1hr


... Kenwood KDW4TTSL Dishwasher

1. changing dishwasher settings from the various dishwashing selections (i.e., auto, auto plus, regular, delicate, etc.). I cannot change the settings from one to another. 2. getting film free cleaning results. Honestly this dishwasher has never provided crystal clean (filmless glasses) or completely dries the full load.


... Bosch SHX68M06UC 24 in. Built-in Dishwasher

Hi, I have a fisher and Paykel double dish drawer model DD605. A couple of days ago when we opened the top drawer all the lights flashed and beeped in sequence repeatedly and would only stop when the power was turned off or the dishdrawer closed. Today I went to turn the top dish drawer on and cannot change the cycle off rinse. I can push the eco button and the rinse cycle works no problem but I cannot change the cycle. The bottom drawer is running as I write this and appears to be fine. An


Hi\015\012\015\012\015\012Could you please let me know which all lights are blinking/lit solid in sequence from right to left. This could be an issue of drawer lock mechanism or flood switch issue. PLease post back with detai ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

I have a Kenmore Elite Ultra Wash Dishwasher 665.1319 and it uses all of the rinse aid added in 1 day. The setting inside is set at the factory set of 2. Any suggestions on how to fix that?


... Dishwashers

Tecnik DW2677/1 Dishwasher - Electrical fault - program stuck on 'Rinse' with start light flashing


... Tecnik Dishwashers

We have just purchased an IQ100 SE26N250G Dishwasher and are having problems in setting the washing programme. We have followed the instructions in the leaflet but the dishwasher will on wash on 40 degrees and cannot be cleared or changed to any other programme. Also, the information in the instruction manual that accompanied the dishwasher is not at all clear and is rather confusing as it shows that to clear an existing programme you simultaneously press and hold the 2nd and 4th buttons out o


... Siemens Dishwashers

Fisher&pakel dishwasher The settings on my office dishwasher wont stay on normal it changes to "delicate" and then beeps at me and doesnt do anything. Is there anything i can do or should i call someone?


I would call the company number to ask\015\012you could have a problem if it is a push button type controll and could have gotten dirty behind it ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Dishwasher setting is stuck on heavy - Fisher and Paykel DD605SS Stainless Steel Dishwasher


Please provide some detail about the problem. does it work on that setting. clean the panel with damp clean cloth. ... Fisher and Paykel DD605SS Stainless Steel Dishwasher

NEFF S51M53X0GB - Display flashing and programme stuck on the rinse cycle only. Can't change cycle can't reset and doesn't change when switched off at the wall. Any suggestions welcome??


... Dishwashers

Change Cycle dishwasher stuck on rinse&hold can't change cycle


Bad electronic control or stuck keypad ... Bosch 24 in. SHU66C02 / SHU66C06 Built-in Dishwasher

We just installed a Fisher & Paykel DD603 dishwasher. Intially it would not drain correctly. And, proceeded to flood the bottom and set off the F1 error code. I dried out the bottom to get the F1 code to stop, which it did. After adjusting the leveling the dishwasher drained both drawers correctly, once. A few minutes after the rinse cycle had finished and the drawers were empty of water the F1 code started again. Now it will not go away unless I unplug the machine. I dried out the bottom very w


HI. The original code(f1) is in reference to a overfill condition. This may be a clogged drainage Assembly. This condition will usually cause the control sector to short out if not corr ... Dishwashers

I have an ignis dishwasher by whirlpool and it seems stuck on the rinse cycle - it wont move on and the machine is beeping non stop. I have switched the machine off several times and unplugged it but it still lights up on the rinse icon and is still beeping and I cannot move it on


... Dishwashers

My dishwasher stopped cleaning my dishes when it was just under 2 years old. I hadn't changed the type of detergent, or how I loaded/ran it. We have since tried different detergents and different wash cycles to no avail. If I want to use the dishwasher, I must first completely rinse off any food--and I cannot load dishes as tightly as I used to be able to. Yesterday I noticed that a dish in the back left corner--bottom rack was completely untouched---the residue was as if I had put it in the


Hi,\012\012\012\012\012I\012have an older dishwasher also and recently my wife also complained\012about it not cleaning right... so me being the man I am tried in vain\012to clean the things... Bought new ... Whirlpool GU3600XTV Dishwasher

Bosch dishwasher Dishwasher given to me two months ago and everything came out brilliantly clean. This week everything coming out white. Salt and rinse aid full. Have not changed settings. Does not come off glasses. Baked on. Everything getting ruined. Also started to sometimes make whiny sound at certain times in cycle. Filters clean.Please help!


Check the salt cap is not split and tight. if this is o.k try to empty out the salt and use 3 in 1 tabs as they contain salt and rince aid ... Kenmore 13869 / 13864 / 13862 Dishwasher

I 've got ADP 5550 dishwasher ,rinse only light is stuck flashing and I can't change programs or start dishwasher


Hi,This problem can be fixed by pressing heated dry, normal, heated dry, normal keys\015\012within 6 seconds. There should be a technical sheet attached to the toe\015\012panel at the bottom front of the machine. If pro ... Whirlpool 24 in. ADP5966 Free-standing Dishwasher

I cannot figure out how to advance a cycle without having to go through the entire cycle. For example, I had a drain problem with my sink and the plumber put the rinse and hold cycle on for about 10 minutes; now every time I want to turn on the dishwasher it is in the rinse and hold cycle. How can I change it???


Hello,\015\012\015\012Welcome to FixYa.\015\012\015\012Your post doesn`t specify a model number, however on most Bosch dishwashers in order to change from "rinse & hold" to "regular" ( or any cycle ) simply turn t ... Bosch Dishwashers

I have a LG intello dishwasher 2050SH Turned it on yesterday and did a rinse. This was the first use for 4 months in our second home. It was very cold. The rinse stopped some way through and an error message displayed (cannot remember). Tried to run again and now the dsiplay is locked. It turns on with usual sound, but none of the buttons work. They make a noise when pressed but nothing on the dsipay changes. I suspect that the outlet was frozen and that I should not have tried again - too im


Hi\015\012\015\012To\015\012unlock the lock in your LG Dishwasher, with the door open press the SPRAY &\015\012RINSE buttons simultaneously for 15 seconds. Hope this helps...please post back fo ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2564 seconds