Having problems with your Fisher and Paykel 24 in. DD-602 Built-in Dishwasher ?

Hi the top draw of my fisher & Paykel 2 draw dishwasher is displaying an F2 with a spanner display, can you please help. Vicki


Answers :

Hi Vicki.

F2 means that there is a problem with the rotor attached to spray arms on one side, and to impeller pump on the other. The electronic control detects rotation thanks to a hall sensor located at the base of the rotor. If rotation is not regular you get F2.

The problem is usually given by debris stuck in the rotor mechanism, and it is fixed taking apart and reassembling the rotor and arms. The sensor can also be faulty, but this happens quite uncommonly. Usually the problem gets fixed disassembling, cleaning and reassembling rotor and arms.

The video below shows how to disassemble upper part of the rotor. If cleaning that area does not fix the problem, sensor and part underneath must been accessed. At that point the repair will become more complicate and you may require a professional. Try cleaning the rotor, most of the time that is enough to fix the problem.

Regards.

Ginko
http://www.youtube.com/watch?v=UXzuJvKIIgU
Repair Help & Product Troubleshooting for Fisher and Paykel 24 in. DD-602 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Hi the top draw of my fisher & Paykel 2 draw dishwasher is displaying an F2 with a spanner display, can you please help. Vicki


Hi Vicki.F2 means that there is a problem with the rotor attached to spray arms on one side, and to impeller pump on the other. The electronic control detects rotation thanks to a hall sensor located at the base of the rotor. If rotation ... Fisher and Paykel 24 in. DD-602 Built-in Dishwasher

F1 fault f1 on the display and wont do anything had to turn it off at the wall.its a fisher and paykel nautilus about 5 years old and NOT the draw type any suggestions ?


F1 code would mean the flood switch is activated.\015\012\015\012In Nautilus people have found this to be caused by a faulty door seal.\015\012Water seeps under the diswasher base panel and finally the flood switch (a protection) ac ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

My dishdraw is making random noises comming on by itself and has a spanner and f1 displayed on the screen could you please identify the problem


... Fisher and Paykel DishDrawer DS605FDSM Stainless Steel 23 in Builtin Dishwasher

Fisher and Paykel dd605 The flood switch has tripped and is showing "F1 with spanner" on the display turned of for 24 hr still there pumps just running . this problem happened aftr my son put cloths washing powder in it


F1 is a flood code meaning excessive amounts of water have collected on the bottom catch basin. If a flood condition is detected, both draws will activate the drain motors and flash F1. Remove the bottom drawer and dry the catch basin.TUR ... Fisher and Paykel 24 in. DD603H W Built-in Dishwasher

Fisher Paykel DD603 Problem. Top drawer shows F1 and pump runs continuously. Lower drawer does nothing, no display. I think the Electronic Controller in lower drawer is fried and maybe the Mains Filter Board. Please help.


Yup, definately the bottom drawer controller, for some reason you can run a DD603 with no board in the top, so long as you have a board in the bottom, but not the other way around. This is the fault you get, constant F1 from the top drawer. If you ar ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Bottom draw displaying U1 error message - Fisher and Paykel 24 in. DD603H W Built-in Dishwasher


There is no water coming to the drawer.\015\012\015\012This could be due to several reasons. The tap must be on as I presume the top drawer is working.\015\012\015\012Could be one or more issues like Inlet solenoid,controller ... Fisher and Paykel 24 in. DD603H W Built-in Dishwasher

Fisher and paykel dishwasher model DD603M both drawes are flashing F1 with a spanner symbol what should i do


... Dishwashers

HI I have a 2 drawer F&P unit. the bottom draw works perfect, the top has not power and no display at all. Please help, Cheers.


Hello,Here is a video that explains how to take the drawer out. ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

I'm Not sure of the model number, Fisher & Paykell double draw dishwasher


F1 fault means the flood switch on the base of the dishwashers has been activated.You would need to ring someone who repairs dishdraws.\015\012You can remove the two kick plates on the bottom of the dishwasher.\015\012Dry out the water i ... Fisher DD603FCSS Dishwasher

There was some ordinary dishwashing liquid leftover on plates when i placed into dishwaher and this caused foam. The machine had a spanner appear on display and blinking light with a beeping noise. whenever I turn the machine off from the power button, it would after a 1 minute turn itself on again. with the blinking light, beeping noise and spanner picture on display. 1. how do i turn off completely 2. what does spanner mean and how do i resolve.


Hello &\015\012Welcome to FixYa\015\012\015\012Spanner\015\012indicates that there is excessive water in the unit, and instead of leaving it\015\012open you can take off the bottom front panel of the unit and clean the ... Dishwashers

Hi please help. the top draw in my dd603


The sensor that tells the dishwasher that the drawer is closed may be faulty or dirty. This means the dishwasher thinks the drawer is open and ignores the start command.\015\012\015\012You can clean/ replace the sensor at the back of the ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Power is on, lock symbol appears in display panel of both upper & lower draws. On pressing lock button on either draw you hear a click however their is nothing else showing in the display panels & there is no response when pressing the power buttons or any of the other buttons. Every thing is completely dead. Is their a fuse or overload button?


Hi \015\012If the key/ lock symbol is showing in the display, then it is possible you have the child lock on. Disable it by pressing the key/ lock button on the panel. Press and hold the "Lock" icon again until o ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Fisher paykei dd603 double draw f1 falt showing


... Fisher and Paykel 23 in. DD-603 Built-in Dishwasher

Fisher paykel DD609 diswasher - top draw does not drain properly. Water build up in bottom of the top draw even when bottom draw is used.


It is usually due to a small piece of broken glass or plastic blocking\015\012the little propellor that pumps the water out, (think of the little\015\012paddle in Nemo's tank)\015\012You need to remove the bottom of the machine, undo one screw ... Dishwashers

Hi, I emailed sometime ago about my fisher @ paykel dishwasher not working. This will be the first time I've used your service and I'm just a little unsure how effective it will be. I guess I'm a just being sceptical but i really want it fixed without paying call out fees and the like. So how much do i have to pay. The top draw will not turn on. At the time the draw was hard to open so i went through the procedure to recalibrate the draw when i was holding down the buttons to get it into self t


Please confirm if you still have a problem with the dishwasher. It is unclear from the thread of your responses as the statements of the other expert will be visible only to the client. \015\012Also please confirm what you mean by "buttons stop ... Fisher and Paykel 23 in. DD603H SS Free-standing Dishwasher

Display frozen My DW920 Fisher and Paykel dishwasher display is frozen on 91 and the normal button keeps on flashing. Also the unit does not respond to any buttom pressed - merely beeps. Thanks in advance.


I think if you push the heated wash and heated dry buttom several times until all the buttoms light up this may fix your problem.You may have different kind of light flashing indicator, but the same solution.Possibly check the sequence sw ... Dishwashers

My Delonghi dw67s power button is on but the display panel wont light up. Sometimes when I leave it on an hour or so later the display comes on but I have left it for several hours and it still isnt lighting up??? Help Please!!!


Not true..... ... Dishwashers

Whirlpool ADP5966 developed a leak at small rubber connection from circulation pump. Leak repaired, machine reconnected, programme selected, some sound for about 20 secs then shutdown. Display showed F6 once then nothing. L.E.D.programme indicator glows, display remains blank, start light flashing. Help please


... Whirlpool Dishwashers

I have a single draw Fisher and Paykel dishwasher. I stupidly put washing up liquid in the dishwasher which resulted in a F1 problem. Water started leaking under the draw and onto my floor. I turned the dishwasher off at the power point and have cleaned up the leak. Have I damaged my dish washer? How do I fix it?


Ok , F1 means your flood switch has activated, which is underneath the drawer. now they show the F1 fault because of 2 reasons.1st there is still water underneath drawer causing switch to activate. 2nd your activator board which has the flood switch ... Fisher and Paykel 23 in. DD-603 Built-in Dishwasher

Fisher Paykel control panel to far left side has a film on it that chipped off - showing a shinner stainless steal under it. I guess this is a coating of some sort. Dish draws are 4 1/2 yrs old. Mild det on them only. Only bottom draw has the cracking on it. -- can that be fixed or just has to stay ugly.


You can buys the parts that look chipped/ broken and replace them. Panel parts are very easy to replace.\015\012\015\012Check out which parts you need from the parts manual and order from the local fisher and paykel distributor.\015 ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Fisher & Paykel DD603 model Upper Dishdrawer has F3 fault code. cycke starts, then stops within minutes. Water in tub after stopping is not hot. Temp sensor bad? Could you please send pdf of servie manula for dd603 please? Thanks [email protected]


F3 means your dishwasher water is too hot. Go to the link below and it will show you how to determine what is causing the error. ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Hi there my f&p d draw dishwasher is dead on the top draw i have tried replacing an other mother board and controll panell of another dishwasher but still no good please advise joseph.


Is it plugged in all the way? ... Dishwashers

We have a fisher Pakel dd603 2 drawer , the top draw wont close so we r trying to remove it to see what is blocking it can't figure out how to take top draw out


Hi!There are two small clips down in the front of each drawer, one on each side. You depress these clips/tabs which are attached to the drawer slides, and then the drawer can be lifted away from the rails. You need to be very careful not to dam ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

I have a 10 year old dishdraw (Model No DD601v2). It is displaying a fault message "F1" on the top draw display and will not start. What fault is this indicating?


Normally F1 should display in both drawers. \015\012\015\012But this is a bit unsual. Please confirm if you are still able to operate the bottom drawer. ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Fisher Pykel draw dishwasher has F1 on both draws


My fihser dishwasher is showing f2 and not draining ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0772 seconds