Having problems with your Fisher and Paykel 24 in. DD-602 Built-in Dishwasher ?
Both drawers go on if you start 1 drawer. they both do the exact same thing at the same time?
Repair Help & Product Troubleshooting for Fisher and Paykel 24 in. DD-602 Built-in Dishwasher
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Both drawers go on if you start 1 drawer. they both do the exact same thing at the same time?
... Fisher and Paykel 24 in. DD-602 Built-in Dishwasher
Have a Fisher & Paykel two drawer built in, each drawer will start running, but stops many times thru the cycle and starts beeping.
The dishdrawer is a very sophisticated dishwasher and is very sensitive to dirt collecting inside and in the drain hoses. My suggestion would be to first clean the drawers from inside with damp cloth, especially around the top panel. Buy Finish dishw ... Fisher and Paykel Dishwashers
When I depress the start button, the timer is clicking to engage and begin the cycle, however, the dishwasher does not start. Other times, there is no noise whatsover when I press the start button and neither does the dishwasher start. If I don't use it for say 2-3 weeks and try again, it starts working for a period of a few months, but then the same thing happens again down the track. This has occurred about 4 times.
Hi.Resetting the breaker means turning power off and back on from the main switch in your house. Same as disconnecting power cord.I am sure that in this case "tripping the breaker" will not help. Repairing appliances is not th ... Dishwashers
This is the 2nd time I've had problems with my dish drawer. After I cleaned the filter and replaced it, I had standing water on the bottom of the drawer. The last time this happened, I had someone come to repair it - ended up it was me. I didn't put it together properly. This time I did the same thing I was told to do. I still have the standing water. What should I do. By the way, the coils are not kinked in the back either. Can you please give me some advice? Please respond to me at F
Unfortunately I have to respond to you through this post per policy of fixya.com. This s to ensure we have a visibility on the quality of the solution and also allow other consultants to help if necessary.\015\012\015\012Water standing a ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher
Im trying to turn on the washer ,but when press the normal cycle button and then start , the lite start to flush and the only thing the washer is doing is draining water, tried couple of times to let the draining finish and it is doing the same thing over and over again.?
... GE 24 in. GLD5500L Built-in Dishwasher
When I press the start/resume control, the dish washer start/resume light blinks 2 to 3 times, then turns-off. then the dish washer beeps several times; however, the dish washer does not start. when turned the breaker switch off and on, and then I press the start/resume control, the dish washer go through a normal wash cycle. The next day when I press the start/resume control, the same thing happens. 2 to 3 blinking lights followed by beeping for several seconds. Dish washer does not start
... KitchenAid KUDC10IXSS Builtin Dishwasher
I have whirlpool diahwasher ,model DU1055XTSQ3,quiet partner -1. when i start the machine the folowings things happen: 1.the machine does not start . 2.Start /resume light starts blinking ,after few seconds ( 40-50 seconds), the pots and pans light also starts blinkng .after some time ( 1 minute ) the normal light also starts blinking .All three lights start blinking 3. I have done the following to rectify the problem from the book : alnernatively pressed heated dry and normal keys for
... Whirlpool 24 in. DU1100XTPS Built-in Dishwasher
I have a two drawer integrated unit, 7 years old, no problems up to now. Both units started beeping; I disconnected the electrical source. Was able to start the top unit after some time messing with the controls. During/after the cycle, both units started beeping again.
Most likely a F1 fault which means that the Mains Filter board on the bottom pan has detected water, a leak. There are, unfortunately, a few possibilities of the cause of this. Most likely it is bad lid motors (the motors that lift and pull down th ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher
The dishwasher won't fill with water. We took the water inlet valve off and cleaned the filter screen. The dishwasher worked about 2 times and started doing the same thing. We then replaced the water inlet valve and again, the dishwasher worked a couple of times and now we're back to it not filling again. What could the problem be?
Check the float assembly, that will trip and stop water from coming in. May have soap or grime holding it up. ... GE 24 in. GLD6260LSS Stainless Steel Built-in Dishwasher
I have a fridgidair dishwasher model FDB4315LFBO and none of the buttons are working this is the second time this happened and last time i removed the cap for the rinse aid and heard a rush of air then everything started working. I already turned off the power to reset things and the PF light flashed until i opened the door then it went back to everything being dead.
Sounds like something has burnt in the main powerboard. ... Dishwashers
Dishwasher Dilema Hi, Can someone help me solve this problem. Last time I had a problem with my dishwashers I was pretty successful in solving it on this site. I was running a reg wash on the top drawer of my Fisher&Paykel when I suddendly had to stop it in the middle of a wash to add more dishes (something I do all the time) suddenly both screens started beeping with an F1 along with a wrench. It sounds like both motors top and bottom are running full blast. I tried shutting the power for a few
You need to remove the bottom drawer and dry out the water with towels and a hair dryer when this is done it should operate normally. most likely when you pulled out the drawer the water sloshed back and out of the drawer making the dishdrawer think ... Fisher and Paykel 24 in. DD603H W Built-in Dishwasher
After the wash & dry is complete, the next time I try to use it, won't turn on. I tried cancel and that starts and finishes but can't get any thing else to work. I turned off the circuit breaker but have to wait 6-8 hours before turning back on. Once this is done the machines runs normal again. I have to repeat this process every time I want run. Any suggestions on what might be causing this???
I have the same problem. The only temporary solution I have so far is \015\012to turn off the circuit breaker and wait between 10 & 30 minutes \015\012before resetting the breaker. The the dishwasher will work for one \015\012cycle. ... Whirlpool 24 in. GU1500XTLS Stainless Steel Built-in Dishwasher
Maytag mjd 2005 when started on normal gives a once-every-two-seconds "wash". Seems to pump out some water each time. When turned off and on again 'normal' button lights and the same thing happens. Will not start without the normal button lighting.
I have the same problem but now on all cycles - to get it off normal and try the other ones, open the door, hold down the 'normal' button for three seconds, and then at least try the other settings temporarily. ... Maytag 24 in. MDB9750AW Dishwasher
My dish drawer won's start. there seems to be no power. i checked the plug and it is fine, but the dw is dead. what are some things i can check? it is a dish drawer - single it is two years old never did this before wall plug has power there are no lights, no electrical activity at all
... Fisher and Paykel DD605I Dishwasher
Our dishwasher won't start (model number 665.16049401). We had a similar problem last summer and a repairman came and fixed it. The problem was that the water level had gotten too low and so the machine locked itself off. This made sense as, at the time, I remembered filling the pool, running laundry and someone taking a shower all at the same time that I turned the dishwasher on. I am guessing this is the same thing that has happened now. The repairman put in a code and the machine worked. Can
Hello,\015\012\015\012ahhhh, you're taking about the reset sequence.\015\012okey dokie :)\015\012\015\012Here it is:\015\012Push the NORMAL WASH then HEATED DRY buttons in that sequence two to three t ... Kenmore Dishwashers
I have a Delonghi dishwasher model no. DW67S/W which is coming up with the E4 message. I had this once before and was told to turn it off and on and it righted itself. This time however I used the next bit of advice. I took everything out including the salt cap thing, tipped it on its side and drained all the water out, reconnected the hoses and when I turned it back on it seemed fine....no E4 messaage straight away. It drained out for a while and then starting filling. It has overfilled again
Hi.As you know E4 means overflow. If the problem occurs regularly there is either a problem with drain line, or a fault.Ensured that you have removed all the water from the inside and cleaned thoroughly the drain ... Dishwashers
My Whirlpool ADP 553 dishwasher starts and time switch goes through normally but nothing happens. The only thing is it does try and drain previous water. I suspect the inlet valve to be faulty thereby not letting water in. Could this be the fault
... Whirlpool 18 in. ADP530 Free-standing Dishwasher
Dishwasher fills with water and then stops. No lights are on at all. I cked wiring and circuit breaker and no issues there. I then flipped off circuit breaker over night. Got up next morning and flipped breaker back on. Dishwasher lights were on and when I pushed Start button, it ran fine. Now it is doing same thing except circuit breaker trick dont work like last time. THERE is NO issues with wiring or connections to dishwasher.
... Whirlpool 24 in. GU2500 XTP Built-in Dishwasher
Often had to press 'Start' up to 5 times to get it going. All lights light up but then go out. Occasionally the pump would run for a minute or so then whole shooting match would close down. Recently we were lucky and it filled with water but sadly disappointed when it closed down again. 8 people in the house so had to do the dishes in the sink (again!!). Plenty of helpers and a glass or two of wine so things weren't that bad. Not good for Dishlex though especially when others say theirs are
Problem not solved yet.\015\012Cleaned the filters well, hoses clear and water delivery happens.\015\012Both pumps work happily so are not seized/locked up or have anything jambed in them (pulled them both out and checked for foreign obje ... Dishwashers
When trying to start the dishwasher you can hear the water come in and the you should here it all engage. All you ear is a hum of an electrical motor. Then it shuts itself down. It tries again after a few and then same thing. The readout that usually tells you the time left just has the alternating 4 lines go around in a circle
The motor or the pump could be jammed. If it is then the motor will trip its overheat safety. When it cools down it tries to run and overheats again. See if there is anything stuck in the pump. ... Whirlpool GU2400XTP Built-in Dishwasher
I have a kenmore dishwasher model #655.1374 or 655.1384 which is only about a year old. I am having a problem with the controls. It will not allow me to use smartwash. The only control that can be used is quick rinse. I reset it by pushing Sani rinse and heated dry. All the lights come on and it seems to do a test. But after that still the same thing except if I push start resume it goes to normal wash which stays on a long time and periodically the cancel drain light comes on as well as the 4
My fisher paykel dishwasher started beeping both drawers. I shut the power off to them and let it sit for awhile. When i turn it back on they do the same thing.
There is a leak on the top bottom housing and also the lower bottom housing. Until it dries out in these areas, it will continue beeping if power is plugged in. Please dry out and wait at least 6 hrs to dry out the sensors.After this, you have ... Dishwashers
Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher The lower drawer won't complete a cycle. It will fill and empty 4 or five times in succession then continue to wash for about 15 mins the it starts to fill and empty as before. On a 36 min Eco cycle after 1 hr it still shows to have 15 mins to the end of cycle and wants to run forever. I have swapped the control boards to no avail.
Http://www.retrevo.com/support/Fisher-&-Paykel-DD603-Dishwashers-manual/id/20093dj878/t/2/\015\012 ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher
LE CODE i am having a le code, it says its the main pump motor. i replaced it and still same thing, fills and then does not start,times out 2 or 3 mins and LE CODE COMES ON.
Check whether you have 115/220V on pump's tags.\015\012In case you can't read 115/220V on pump's tags,\015\012your problem could be the water level switch. The switch level is usually a diaphragm device with a small clear tube attached between the sw ... LG 24 in. LDF 7811 Stainless Steel Built-in Dishwasher
I have a HD 2701 DR pressure washer that starts and runs fine and usually works fine the "first" time but if you let go of the trigger and then try to use it again you just get a trickle out of the end of the wand. Usually if you hold the thing open for a while it will kick in (sometimes it takes forever...). Any ideas? It sounds like some of the "unloader valve" problems are similar but I do not see an "unloader valve" in the parts lists for the 2701...
... Karcher G 3050 OHR Gas Pressure Washer