Having problems with your Fisher and Paykel 24 in. DD-602 Built-in Dishwasher ?

Paykel&fisher dishwasher keeps running - Fisher and Paykel 24 in. DD-602 Built-in Dishwasher


Answers :

Repair Help & Product Troubleshooting for Fisher and Paykel 24 in. DD-602 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Paykel&fisher dishwasher keeps running - Fisher and Paykel 24 in. DD-602 Built-in Dishwasher


... Fisher and Paykel 24 in. DD-602 Built-in Dishwasher

Fisher and paykel dish washer keeps running - Fisher and Paykel Dishwashers


It will help to come up with a cause and solution if you can please specify the model number of the dishwasher.\015\012\015\012Also please confirm if you hear the pump motor start during the cycle. How do you stop the dishwasher. Is there wat ... Fisher and Paykel Dishwashers

Dishwasher keeps flashing F1 - Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher


F1 on your dishwasher is the fault code for leaking inside the machine. the water has caused the flood switch to activate. have you put any detergent rather than your normal dishwasher detergent into the machine? if you have, the water probably leake ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

My Fisher and Paykel dishwasher will not keep running.


It may be that the DW thinks the drawer may have been pulled open. On the right side, near the top. there are two light pipes on the\015\012drawer. One sends an infrared beam of light to a reflective area on the\015\012cabinet, the other receives thi ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Bosch built in dishwasher shu4302uc The dishwasher appears to run through the cycle but the cycle keeps running. I have checked the screens and they were clear. I have a Bosch Dishwasher SHU4302UC and I can't figure out how to cancel the cycle it's in. It keeps running and running. It pumped all the water out and the LED indicator are lit for the rinse/dry.


There is a recall on the control board of many of these models. I have written a guide to help. It is here. Look for the phone number near ... Bosch 24 in. SHU43 Built-in Dishwasher

Code F1 keeps draining constantly - Fisher and Paykel 24 in. DD603H W Built-in Dishwasher


Turn off the main power to the dishwasher.\015\012\015\012I am assuming you are getting F1 error code flashing on the LCD display. This occurs if the flood switch is activated.\015\012\015\012The flood switch is located at the ... Fisher and Paykel 24 in. DD603H W Built-in Dishwasher

Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher The lower drawer won't complete a cycle. It will fill and empty 4 or five times in succession then continue to wash for about 15 mins the it starts to fill and empty as before. On a 36 min Eco cycle after 1 hr it still shows to have 15 mins to the end of cycle and wants to run forever. I have swapped the control boards to no avail.


Http://www.retrevo.com/support/Fisher-&-Paykel-DD603-Dishwashers-manual/id/20093dj878/t/2/\015\012 ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Hello, We have a Fisher & Paykel dishwasher m# dd602 znwn showing After we fixed a hole in the drain line an F1 code still appears and the pump keeps running. What should I do from here?


F1 means that your dishwashers have flooded. You can \015\012download the video in the link below to see how to get rid of the error \015\012and fix your dish drawer for n ... Fisher and Paykel 24 in. DD-602 Built-in Dishwasher

Keeps coming up with fault "F1" - Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher


Is that in one drawer or both?\015\012\015\012Generally it means the flood switch under the drawer (inside the housing is activated). This means water is leaking from somewhere - foam in detergent, cracked or crinked hoses, door seal leak ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Cannot turn my fisher and paykel dishwasher off..keeps beeping and motors are running in both draws. I have taken the bottom draw out and it is dry.. I can only turn it off if I turn the house mains off (then everything else is off!!)


I am assuming you infer that the bottom of the dishwasher is dry when you took the bottom drawer out. This means the floodswitch located on the power filter board at the bottom of dishwasher might be faulty. Do you get any Fault code on the display. ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

The bottom drawer will not run but has power - Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher


If the display on the door does not turn off a few seconds after you shut the drawer, then one possibility is that the drawer sensor switch in the unit is faulty. This sensor operates when the drawer is closed and the unit will not run if the sensor ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Fisher paykel dishwasher not draining well - Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher


Check the drain hoses by removing the dishdrawers from the machine and pulling on the hoses. I installed a Fisher Paykel DD602 about a month ago and the bottom drawer was not draining. I removed the drawer and freed up the drain hose and the machine ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Fisher&paykel dishwasher wont work says F1 - Fisher and Paykel 24 in. DD-602 Built-in Dishwasher


The f1 fault is cased by a leak on the dishwasher.It is activated when water gets to a dangerous level in the base of the appliance near to the PCB. The main reason this happens is putting cups on the drop down shelves and whe ... Fisher and Paykel 24 in. DD-602 Built-in Dishwasher

How do you remove a fisher paykel dishwasher - Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher


If you are just going to fix it you dont need to remove the hole thing WARRING UNPLUG THIS THING B 4 YOU EVEN TAKE OUT ANYTHING ON IT there is power to stuff even when it's off what problem r u having ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Fisher paykel Hi I have a fisher paykel dd603 dishwasher. when I run the bottom drawer on its own ,,it also fill the top drawer with water ! so after the dishwashing cycle , im left with water in the top drawer. im guessing that a valve should close on the top drawer to stop this happening? is there a part I could order and replace myself? thanks [email protected]


Check your email ... Fisher and Paykel 23 in. DD603H SS Free-standing Dishwasher

Fisher and paykel DD603 has no power - Fisher and Paykel 24 in. DD603H W Built-in Dishwasher


If both drawers have no power and the mains supply is ok, then the power filter board at the base of the dishwasher (under bottom drawer) is faulty. ... Fisher and Paykel 24 in. DD603H W Built-in Dishwasher

Fisher and paykel different models - Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher


Please clarify the problem you have with your dishwasher so that I can try and find a solution for you. Fisher and Paykel make a range of dishwashers in particular the drawer units which are very popular and convenient. ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Fisher Paykel DD602 removing bottom drawer - Fisher and Paykel 24 in. DS603H I Built-In Dishwasher


You can view the following video to check how to take the drawer out. The steps are shown half way into the video. Make sure the mains plug is pulled out from the socket before w ... Fisher and Paykel 24 in. DS603H I Built-In Dishwasher

Fisher and Paykel Error code Ho - Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher


... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Dishwasher Dilema Hi, Can someone help me solve this problem. Last time I had a problem with my dishwashers I was pretty successful in solving it on this site. I was running a reg wash on the top drawer of my Fisher&Paykel when I suddendly had to stop it in the middle of a wash to add more dishes (something I do all the time) suddenly both screens started beeping with an F1 along with a wrench. It sounds like both motors top and bottom are running full blast. I tried shutting the power for a few


You need to remove the bottom drawer and dry out the water with towels and a hair dryer when this is done it should operate normally. most likely when you pulled out the drawer the water sloshed back and out of the drawer making the dishdrawer think ... Fisher and Paykel 24 in. DD603H W Built-in Dishwasher

Fisher and Paykel f1 - Fisher and Paykel 24 in. DD-602 Built-in Dishwasher


Hi\015\012\015\012Error F1 on your fisher & paykel means an overfill condition. One of the most common causes for an overfill fault is that the dishwasher cannot pump out the dirty water due to a plugged drain hose. Check the drain ho ... Fisher and Paykel 24 in. DD-602 Built-in Dishwasher

FISHER PAYKEL DISH DRAWER U3 FAULT CODE - Fisher and Paykel 24 in. DD-602 Built-in Dishwasher


LP is a setting for Low pressure. To reset your pressure to HP, hold the Programme and Eco touch switches simultaneously for 5 seconds. Once the setup mode is entered a beep is emitted andthe LCD is red with ‘HP’ or 'LP' displayed. ... Fisher and Paykel 24 in. DD-602 Built-in Dishwasher

Fisher and Paykel Dishdrawer pausing - Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher


... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Fisher and paykel diswasher f1 fault code - Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher


F1 fault code means the flood switch is activated. There is moisture at th e base of your dishwasher.\015\012 ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Flood sensor location fisher & paykel DD603 - Fisher and Paykel 24 in. DD-602 Built-in Dishwasher


... Fisher and Paykel 24 in. DD-602 Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2030 seconds