Having problems with your Fisher and Paykel 24 in. DS603H SS Free-standing Dishwasher ?

A red ligth is on, and on the screen I can se a wrench and a symbol of a crossed water tap, what should I do?


Answers :

Repair Help & Product Troubleshooting for Fisher and Paykel 24 in. DS603H SS Free-standing Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

A red ligth is on, and on the screen I can se a wrench and a symbol of a crossed water tap, what should I do?


... Fisher and Paykel 24 in. DS603H SS Free-standing Dishwasher

My Bosch dishwasher stopped the other day for no reason, the bottom still has water in it, I just tried to start a full wash again and all that happens is the red light below the brush symbol lights up, then after a couple of minutes the red light below the tap symbol lights up, also the red light below the drying symbol is also lit, but nothing happens after that? Any ideas?


... Bosch Dishwashers

MyTecnik dishwasher, TKD795/3 is draining out as soon as you switch on and continues doing this even with the door open. If you reset and try to start a new programme ot continues to drain and the water tap symbol comes on. I have disconneted to water supply and checked the little red filter and it was fine. The water pressure seem fine and not sure what to do now.


... Tecnik 18 in. TKD7000 Built-in Dishwasher

Red tap symbol lights up but no water comes in to dishwasher


I hate to point out obvious things, but did you crank your line tap all the way out clockwise? And if you are using a line tap, are you sure the piercing needle conpletely punched through the hose?Try removing the water line from your dishwashe ... Bosch 24 in. SHU66C02 / SHU66C06 Built-in Dishwasher

My fisher paykel DD603 fills with water at the start of the cycle and stops with the following error code and a beeping noise: - error U1 spanner symbol - crossed out faucet symbol. The water level is high enough that the spray arm is floating in the water. I am able to drain the water by entering the hardware diagnostics mode and running the motor in the drain direction. By removing the filter plate and examining the impellers I am not able to see visible damage. All filters are clean. The


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks for using FixYa. You are spot on as error U1\015\012indicates that the dishwasher has twice tried to fill with the required amou ... Dishwashers

FP DD603 fills water, stops error 01 crossed faucet symbol


Hi,I had the opportunity to work on a Fisher & Paykel DD632 dishdrawer a couple days ago. By the way, I am a big fan of Fisher & Paykel equipment--if you ever have the opportunity to work on one, you'll see why. The engineering is ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Starts ok wrench appears heats ok wash cycle pressure strong at first then fades wrench appears -p2 -cleaned screens and checked spray arms .incoming water pressure 20 psi whats wrong ?


Check the spray arm. Machine water pump. After this pump pressurebuilds up to the spray arm. Rubber hosejunction inside the wash tub. This place gets connected to the spray arm system. You can see this when you draw the tray for loa ... Hobart 24 in. LXIH-3 Built-in Dishwasher

My top dishdrawer stopped working half fill of water. I put it on rinse cycle and it drained the water. I found a bit of sand in the bottom of drawer. I wiped the sand out and then put onto a cycle. After a couple of minutes the dishwasher started flashing a tap symbol with a slash through it and stopped working. Any help please:) Jacki


... Fisher and Paykel 23 in. DD603H SS Free-standing Dishwasher

Fisher & Paykel DD24DCX6 Double Drawer DW shuts off at approx 2 minutes into cycle and again at about 24 minutes showing a water spigot symbol on the LCD screen


... Dishwashers

There is a symbol of a tap when i switch the dishwasher on..and it wont wash anything? It sounds like its draining? Ive tried resetting it and switching on and off but nothing. Does it need filling up with water?


Need to check your water supply from the house to the dishwasher, it won't operate properly if the water level in the washer is low. Check the water valve at the sink ands the water valve at the dishwasher.\015\012\015\012Good Luck on yo ... Dishwashers

I have a Bosch Sgv46m43gb, it's just stopped working mid cycle and come up with a tap symbol on the display. Tried re-setting but it wont move. Water at bottom wont clear. Can anyone help


... Bosch Dishwashers

I've put washing up liquid in my Bosch dishwasher...now all it will do is display a flashing red light next to the tap symbol and try to drain itself over and over...??


... Dishwashers

The washer still has water in it , It has stopped , there is a red light next to the tap svmbol on the controls ( don't think I've seen that lit before )


Are you please able to provide the model number of the dishwasher. \015\012\015\012Also please confirm which cycle was it on and how far into the cycle did it stop. For example was it still swishing the water around in wash cycle or drain ... Neff Dishwashers

Temperature Problem The water will not reach its proper temperature and a EO error code comes up with a wrench symbol next to it. How do I fix this?


Whats the model?lxih,lx30h,lx18,lx40?What temps are low,wash or rinse?Im a hobart tech and service these units.Let me know. ... Hobart 24 in. LXIC-5 Built-in Dishwasher

Hello, my Siemens integrated dishwasher no: SE64M359GB stopped working mid-cycle with 35mins remaining. It is displaying the red tap emblem. Usually the dishwasher starts when the dishwasher door is closed fully (having pressed the power button). However, it is making a noise as soon as the power button is pressed. I have checked the water supply and pipes and they are OK. The filters are also clean and OK. We have an electric de-scaler on our system so I imagine calcium build up should n


... Siemens Dishwashers

SIEMENS DISHWASHER ERROR CODE E15 WITH FLASHING TAP SYMBOL. WILL NOT SWITCH OFF WITH ON/OFF SWITCH OR BY OPENING DOOR ,FULL OF WATER. LEAKING FROM LOWER FRONT CORNERS BELOW THE DOOR.


Order Management System \012\012You will find a manual on this link that may help you ... Siemens 24 in. SE25A266 ExtraKlasse Free-standing Dishwasher

SIEMENS DISHWASHER ERROR CODE E15 WITH FLASHING TAP SYMBOL. WILL NOT SWITCH OFF WITH ON/OFF SWITCH OR BY OPENING DOOR ,FULL OF WATER. LEAKING FROM LOWER FRONT CORNERS BELOW THE DOOR.


... Siemens 24 in. SE25A266 ExtraKlasse Free-standing Dishwasher

Neff dishwasher, symbol like a tap is red but cannot find what this means in the manual


... Neff 24 in. S4443 Built-in Dishwasher

What does the red tap symbol mean when its illuminated?


I am assuming that the d/w is a Neff as the post is in this section....The tap signs means there is a problem with the water flow in or out of the machine. \015\012if you remove the lid and take the two t20 screw off the left side panel at the ... Dishwashers

The top drawer will not take in water. The tap symbol flashes. The bottom drawer is working perfectly. I have cleaned and checked it - no obvious obstruction in the drawer.


1 the inlet valve need replacing its bottom of the draw bit tricky to replace it to check it just unclip bottom draw to the side disconect the hose from the inlet top draw valve and turn it on for a sec see if water pumps out make sure you got small ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

My program is starting but stops after roughly 1 minute with water in the base and the tap sign is then lighting red


Bad float sensor or timer. ... Siemens 24 in. SL34A006UC Built-in Dishwasher

My dishwasher is not emptying and all three lights are on which includes the one with the tap symbol. help please am desperate, i have emptied by hand and cleaned out filter but it seemed fine and set it on again. it is sitting with water in the bottom.


Hi,\012MY DISHWISHER WILL FULL UP WITH WATER AND THE DETERGENT DISPENSER WILL OPEN THEN IT CLICKS LIKE IT IS GOING TO START AND IT JUST HUMS. ... Dishwashers

It keeps running and shutting off. The repair symbol is lit on the screen that shows a little wrench


Is this problem with both the drawers or just one of them.\015\012\015\012Do you get any other code in the display along with the wrench symbol?\015\012 ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Dishwasher turns on without anyone pressing the start button. Wrench symbol is on the screen of both drawers. Thanks, Bill Hewitt


This is a message indicating that there may be a water leak in the unit casing. You can open the bottom drawer and left it off it's tracks and take a look with a flashlight to see if there is any water in the casing. I would put a paper towel and s ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Dishwasher fills and empties but will not go through cycle. Have red tap symbol illuminated and have checked float switch. Seems to be clicking fine. Suspect main circulation pump but only 3 year old machine. Help?!?


Those things are built to last no longer than a max of 2 years. It is quite possible that the pump is out of time but if you or a relative of yours is handy enough than you can buy one and fix it your self. saves a great deal of money ... Neff Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1059 seconds