Having problems with your Fisher and Paykel 24 in. DS-603 Built-in Dishwasher ?

F1 comes up on the screen and alarm goes off - Fisher and Paykel 24 in. DS-603 Built-in Dishwasher


Answers :

The most likely cause is the flood switch has triggered. This means there is water at the base of the dishwasher under the drawer. You have to turn the power off at mains and take the drawer out. Dry the base with towels and hair dryer and put everything back.
\015\012
\015\012Cause of water collecting is one or some of these - foam in detergent (incorrect type), leak in lid seal, hoses cracked or kinked.
\015\012
\015\012Hope this helps.
Repair Help & Product Troubleshooting for Fisher and Paykel 24 in. DS-603 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

F1 comes up on the screen and alarm goes off - Fisher and Paykel 24 in. DS-603 Built-in Dishwasher


The most likely cause is the flood switch has triggered. This means there is water at the base of the dishwasher under the drawer. You have to turn the power off at mains and take the drawer out. Dry the base with towels and hair dryer and put everyt ... Fisher and Paykel 24 in. DS-603 Built-in Dishwasher

F1 coming up on screen - Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher


You must be having F1 code flashing on door display of one of the drawers of your dishwasher.\015\012\015\012This means the flood switch has been activated. Check if there is water inside the dishwasher (turn power off at the mains suppl ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Keeps coming up with fault "F1" - Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher


Is that in one drawer or both?\015\012\015\012Generally it means the flood switch under the drawer (inside the housing is activated). This means water is leaking from somewhere - foam in detergent, cracked or crinked hoses, door seal leak ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

How does the front of the tub come off - Fisher and Paykel 24 in. DD603H W Built-in Dishwasher


I have dish drawer model DD601V2 and after fixing a U3 error on the top drawer, by clearing pump line and into the hose, water is leaking through the floor cavity where to dishwasher sits, into the downstairs of our home. I'm guessing the hose is pe ... Fisher and Paykel 24 in. DD603H W Built-in Dishwasher

F6 error message on led screen and leaking - Fisher and Paykel 24 in. DD603MFC Built-In Dishwasher


... Fisher and Paykel 24 in. DD603MFC Built-In Dishwasher

The power on the top draw doesnt come on - Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher


Most likely the thermal fuse has blown which shuts of the control power.\015\012You will need to replace the heater assembly at the base of the drawer as the thermal cutoff is integrated with it.\015\012The parts are listed in this docume ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

U 3 on screen - Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher


U3 means the unit failed to drain. check the motor rotor under the spray arm and look for a drain blockage. try swapping the motor rotor from the other drawer to see if this is the fault. if not try swapping the main PCB boards (Mtr Controller modul ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

I have a Fisher & Paykel 913T soft touch dishwasher. On all types of washes when the wash cycle starts there is no 230 volts on the element & after 5 minutes the wash cycle finishes & then goes onto to the next cycle. None of the wash or rinse cycles heat the water but on the dry cycle their is 230 volts onto the element & dries the dishes OK. Is my problem the power supply PCB or could it be the Controller PCB? Does the 230 volts to the element on dry cycle come from the same cicuit on the po


Have you considered the possibility the water temperature sensor may be faulty.\015\012\015\012If the controller is getting false water temp reading then it may never turn the heater on.\015\012\015\012Generally with FP dishwa ... Dishwashers

F2 Code Hey, I have a single drawer built in Fisher & Paykel dish drawer and today I pulled the spray arm, filter and large metal screen out to clean them as we have been starting to get a bit of stuff left behind after washing lately. That was all good After putting it all back in though I went to use the dishwasher and it stopped and came up with an F2 fault, I thought I may not have put the bits back in properly so pulled them out again and noticed that on the rotor that connects the motor to


Fault F2 means the rotor is not rotating. If you say some of the vanes have broken off, they could have been jamming it. This should spin freely with minimal force when installed correctly. If you removed the rotor itself, you do ned to take care whe ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

F2 error on bottom draw screen - Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher


... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Fisher&paykel dishwasher wont work says F1 - Fisher and Paykel 24 in. DD-602 Built-in Dishwasher


The f1 fault is cased by a leak on the dishwasher.It is activated when water gets to a dangerous level in the base of the appliance near to the PCB. The main reason this happens is putting cups on the drop down shelves and whe ... Fisher and Paykel 24 in. DD-602 Built-in Dishwasher

Paykel&fisher dishwasher keeps running - Fisher and Paykel 24 in. DD-602 Built-in Dishwasher


... Fisher and Paykel 24 in. DD-602 Built-in Dishwasher

Fisher paykel dishwasher not draining well - Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher


Check the drain hoses by removing the dishdrawers from the machine and pulling on the hoses. I installed a Fisher Paykel DD602 about a month ago and the bottom drawer was not draining. I removed the drawer and freed up the drain hose and the machine ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

How do you remove a fisher paykel dishwasher - Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher


If you are just going to fix it you dont need to remove the hole thing WARRING UNPLUG THIS THING B 4 YOU EVEN TAKE OUT ANYTHING ON IT there is power to stuff even when it's off what problem r u having ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

FISHER PAYKEL DISH DRAWER U3 FAULT CODE - Fisher and Paykel 24 in. DD-602 Built-in Dishwasher


LP is a setting for Low pressure. To reset your pressure to HP, hold the Programme and Eco touch switches simultaneously for 5 seconds. Once the setup mode is entered a beep is emitted andthe LCD is red with ‘HP’ or 'LP' displayed. ... Fisher and Paykel 24 in. DD-602 Built-in Dishwasher

Fisher and paykel DD603 has no power - Fisher and Paykel 24 in. DD603H W Built-in Dishwasher


If both drawers have no power and the mains supply is ok, then the power filter board at the base of the dishwasher (under bottom drawer) is faulty. ... Fisher and Paykel 24 in. DD603H W Built-in Dishwasher

Fisher and paykel different models - Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher


Please clarify the problem you have with your dishwasher so that I can try and find a solution for you. Fisher and Paykel make a range of dishwashers in particular the drawer units which are very popular and convenient. ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Fisher Paykel DD602 removing bottom drawer - Fisher and Paykel 24 in. DS603H I Built-In Dishwasher


You can view the following video to check how to take the drawer out. The steps are shown half way into the video. Make sure the mains plug is pulled out from the socket before w ... Fisher and Paykel 24 in. DS603H I Built-In Dishwasher

Fisher and Paykel Error code Ho - Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher


... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Fisher and Paykel Dishdrawer pausing - Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher


... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Fisher paykel dishdrawer f2 with wrench - Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher


... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Flood sensor location fisher & paykel DD603 - Fisher and Paykel 24 in. DD-602 Built-in Dishwasher


... Fisher and Paykel 24 in. DD-602 Built-in Dishwasher

Fisher and paykel diswasher f1 fault code - Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher


F1 fault code means the flood switch is activated. There is moisture at th e base of your dishwasher.\015\012 ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Excess water in fisher peycal dishwasher - Fisher and Paykel 24 in. DD603H W Built-in Dishwasher


... Fisher and Paykel 24 in. DD603H W Built-in Dishwasher

Fisher and Paykel f1 - Fisher and Paykel 24 in. DD-602 Built-in Dishwasher


Hi\015\012\015\012Error F1 on your fisher & paykel means an overfill condition. One of the most common causes for an overfill fault is that the dishwasher cannot pump out the dirty water due to a plugged drain hose. Check the drain ho ... Fisher and Paykel 24 in. DD-602 Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2435 seconds