Having problems with your Fisher and Paykel 24 in. DS-603 Built-in Dishwasher ?

Fisher and Paykel F1 error

\015 Hi there, I have the following error on my DD603 double dish drawer. F1, I did have the F1 on the top drawer before about a year ago and had water at the bottom which I dried up and got working again, but this time I have no water there and and have heated up with a hair dryer and left to stand for a week in case it was damp connections but still no better. \012\012The F1 error code is on both drawers now.\012Would there be a problem with the board in this case,\012Any replacements here in Rip Off Ireland are so expensive it seems cheaper to buy a new cheaper brand, I mean 100 euro just to call to the house to tell me what is wrong with it seems ridiculous and then the parts again overpriced here, and a new cheap one would only cost 200 euro\012\012Hugh\015

Answers :

Repair Help & Product Troubleshooting for Fisher and Paykel 24 in. DS-603 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Fisher and Paykel Error code Ho - Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher


... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Errors and restarts - Fisher Paykel Fisher & Paykel DishDrawer DD24DCB7 Semi-Integrated Double DishDrawer with 14 Place Settings, 9 Cycles, Eco Option, 163 Degree Sanitizing Temperature, Delay Start and Adjustable Racks: Black


Will need a description of the problem. Some of the common fault codes are F1, F2 and F3. All these fault codes stop the dishwasher and will not go away until the cause is removed. Please indicate the problem you are experiencing. ... Fisher Paykel Fisher & Paykel DishDrawer DD24DCB7 Semi-Integrated Double DishDrawer with 14 Place Settings, 9 Cycles, Eco Option, 163 Degree Sanitizing Temperature, Delay Start and Adjustable Racks: Black

F4 error fisher & paykel nautilus dishwasher sometimes this error comes up and it seems to occur about 10 minutes from the end of the cycle. it doesn't happen all the time. the user guide does not specifically address this error code.


F4 is a heating error- dishwasher has not reached temperature in allocated time. If intermittent fault, problem is usually with electronic board, which has temperature sensor attached. Sometimes the wiring to the control board burns out and can give ... Fisher Dishwashers

DS603 Fisher & Paykel U1 error code ..(see our previous errors we've listed) we have now pulled out the yellow water valve that goes up behind the front panel and at the other end by removing the drawer and plastic protector thingy - we checked that there were no bedris or calcium buildup in the valves ends and filters and replaced it all. So we put it all back to gether as we could not see what would cause this error, only to find that it worked - water came into the machine but about 4 mins in


This product is total ****.\015\012Pull it out, call whoever sold the **** to you\015\012and tell the to come get it and shove it up their ***.\015\012Then buy a Bosch and live a happy life.\015\012The design is moronic. The machine is like the old\ ... Fisher and Paykel 23 in. DS603H W Built-in Dishwasher

F1 error on Fisher and Paykel Dish Drawer


Sorry did not see your problem report earlier. If you have checked the sensor under the bottom drawer and it is dry, then F1 is caused by top drawer power filter fault. This means the bottom drawer controller is giving the F1 error but the top drawer ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Error code. Fisher and Paykel Dishwasher


Well since you asked on the 5th July, and no reply, doesnt look like you may get one. I thought thats what this site was about?? ... Dishwashers

Fisher Paykel Dishwasher Door Open error code


If it is a dish drawer type there is a clip at the rear of the drawer that holds the drawer closed. you will need to withdraw the drawer partially to look in. with the drawer open the fingers should be facing towards you. If not you will need to reac ... Fisher and Paykel 24 in. DD603H W Built-in Dishwasher

Fisher and Paykel Soft Touch F1 error and full of water - leaking


... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

F1 Error on Fisher & Paykel Nautilus


It leaked before leading to this.1- Unplug the power.2- Dry out the leak.3- Before taking off the lid seal, check if Lid actuator working by going to diagnostic mode. 4- Select LD. 5-Pull the drawer half way out so you can see ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Fisher & Paykel dishwasher drawer won't run, beeps F2 error code


Craig, we had virtually the same situation.  The repair man  came and it took 2 minutes to fix.  The problem was that the bottom drawer had not been used for a couple of years and thus the impellor had jammed.  to fix it take out ... Fisher and Paykel 24 in. DD603H W Built-in Dishwasher

How do i fix an F5 error code on a Fisher & Paykel Dishdraw DS605. I have turned the power off but the error keeps returning?


I am assuming you have the DD605 double drawer dishwasher. Is the problem F5 on both drawers or just one?\015\012\015\012F5 code involves the drawer lid seal and will need a bit of effort to check and fix.\015\012\015\012Take ... Fisher and Paykel 24 in. DD603H W Built-in Dishwasher

Fisher & Paykel DD603 Error code F2. My top dish draw is showing the error F2 , I have taken out the baskets, spray arm, propellors. The metal shaft is completley frozen, I can't move it at all. I see other posts say to wiggle it to free it but that doesn't work here. Can I get a copy of the service manual too? We are along way from a repair man to come look and I like to try myself before spending more money on it. My e-mail is [email protected] Thanks.


... Fisher and Paykel 23 in. DD603H SS Free-standing Dishwasher

My fisher paykel DD603 fills with water at the start of the cycle and stops with the following error code and a beeping noise: - error U1 spanner symbol - crossed out faucet symbol. The water level is high enough that the spray arm is floating in the water. I am able to drain the water by entering the hardware diagnostics mode and running the motor in the drain direction. By removing the filter plate and examining the impellers I am not able to see visible damage. All filters are clean. The


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks for using FixYa. You are spot on as error U1\015\012indicates that the dishwasher has twice tried to fill with the required amou ... Dishwashers

We keep getting an E4 error on our Fisher and Paykel DW60CSX1 dishwasher. It is only new and initially worked fine, now the error indicates the drainage hose is too high, however it is where it says to locate it according to the diagram


... Fisher and Paykel Dishwashers

Dishwasher error have a fisher paykel ds603i, top draw is receiving an error, constantly beeping with red light showing, bottom drawer is running


The error was a flood fault, water was not draining from either of the drawere, I removed the bottom drawer, dried drip pan and used hairdryer to dry fault sensor, the dishwasher then reset itself and works fine. ... Fisher DS603W / DS603B / DS603I Dishwasher

Error E1 Just moved to a house where a Fisher & Paykel EZKleen Stainless Steel DD605SS - 2 drawer is installed. Tried to get it going and both drawers show a plate icon and 38 and 45 mins respectively, then there are some sounds and we get Error E1 on both of them. There was no manual and the video they left didn't help. Any ideas? I would also be interested in a link to a User's guid. Thank you, Julia.


There is no e 1 error in dd603 , maybe u1 or f1 , u can call 1800650590 nd ask hem to send the use nd care manual , or download it from fnd p website ,\015\012If it is U1 its saying taps not turned on , more than likey u have a F1 fault which i ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

My dishwasher's lid is stuck down and won't retract. I have a Fisher and Paykel DD605 dishwasher, and I think I must have placed some dishes in there that were too big for it and the lid got stuck. It's now showing an F7 error and refuses to do anything other than beep at me. I've tried turning the power off and back on, but it persists with the error. Is there a way to get it to reset and retract the lid? I've read that in situations like this, when people get repair technicians to com


The error code f7 stating that "the communication time out error"this are all the reason for the error1.the motor control micro has crashed and is not responding to communication request.2.the hardware communication link from ... Dishwashers

Our 2 drawer Fisher and Paykel dishwasher is automatically starting its own washing cycle (well, motor starts, but no water appears to be entering), then it shows F1 error message and a spanner icon flashes. Within 30 secs of this occurring on one drawer, this starts on the other drawer. Only way to stop is to switch off at power socket. Any idea what the error message is telling me?


... Fisher and Paykel 24 in. DD603H W Built-in Dishwasher

E4 error fisher and paykel dishwasher


There is a Y shape pipe under the sink's piping & it was blocked so I drilled & open a hole then the machine could has drained & worked. ... Fisher and Paykel Dishwashers

Fisher and paykel Nemo error message 8 flashes


... Fisher and Paykel Dishwashers

F1 Error code on fisher paykel softouch dishwasher


F1 means that water is in your basepan--- you can pull the bottom\015\012drawer out and soak up the water with a towel... you will have to use a\015\012hair dryer to dry underneath the control sensor in the back left corner. ... Fisher Dishwashers

Fisher & Paykel DS605 starts cycle, stops, beeps, shows U3 error.


U3 means the tub filled to quickly or the water failed to drain. Do you have very high water pressure? are you using the wrong detergent? eg you can't use tablets (powerballs) etc in the unit. Try putting half a cup of white vinegar in the tub to kil ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

List of error codes fisher & Paykel dw60


... Dishwashers

Fisher & Paykel DW6OCDW1 Error codes


... Fisher and Paykel Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0328 seconds