Having problems with your Fisher and Paykel DD605HSS 23 in. Built-in Dishwasher ?

Washer is making grinding noise after start. I found little plastic pieces in the filter in top washer drain. Cleaned it all out including the well which turns the rotating sprayer on. Less noise but it was not eliminated. Is it possible that the drain pump is making the noise? If so how do I get a repair manual to take the pump out and replace it?


Answers :

Hello. Contact the company's US office and request the repair manual Fisher & Paykel Appliances Inc.
5900 Skylab Road
CA
92647
Huntington Beach
USA
Phone: 1.888.936.7872
Hi.

The pump making noise is a common failure. Before replacing the pump undo pump hoses and ensure that there is no foreign object in there.

Here the full service manual in PDF format.

If the solution was helpful, please do not forget to accept the solution. Feedback is important for us.
Repair Help & Product Troubleshooting for Fisher and Paykel DD605HSS 23 in. Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Washer is making grinding noise after start. I found little plastic pieces in the filter in top washer drain. Cleaned it all out including the well which turns the rotating sprayer on. Less noise but it was not eliminated. Is it possible that the drain pump is making the noise? If so how do I get a repair manual to take the pump out and replace it?


Hello. Contact the company's US office and request the repair manual Fisher & Paykel Appliances Inc.5900 Skylab RoadCA92647Huntington BeachUSAPhone: 1.888.936.7872 ... Fisher and Paykel DD605HSS 23 in. Built-in Dishwasher

My kenmore/whirlpool dishwasher makes a noise, sort of a grinding noise, throughout most of the cycle. I have removed the pump and motor thinking that their might be something in the pump, but there is nothing there. My guess is that the motor is making the noise, but I do not know how to tell other than by replacing the motor and seeing if the noise goes away.


Hi Thank You for usingFixYa. To start with check the pump and try to clean it out, then check drainhose for any obstruction. Also check for a bad bearing on the spray arm. Ifstill the is ... Dishwashers

Motor makes noise shortly after starting, makes normal sound level during main body of wash, then makes noise again during what I'm guessing is the rinse cycle. Not sure if it is a pump or motor problem. Slight electrical smell noticed after finishing the ''cancel/drain''. Water does not seem to be sprayed around washer during normal cycle, even though water has been in the washer.


Make sure the sprayer arm is turning freely, check for something stuck in the base of the sprayer arm (food or utinsel) preventing it from turning. ... Dishwashers

Bosch SHY66C makes groaning noise during the wash cycle. Circulating pump, drain pump and water inlet valve have been replaced.


... Bosch 24 in. SHY66C02 / SHY66C06 Built-in Dishwasher

Makes rumbling noise during wash cycle. I've pulled the pump and found no debris. It's been making this noise for about a year now. No problems with our dishes getting washed. Do you think the bearings inside the motor may be bad? If so, would I need to replace the motor and pump assembly?


... GE 24 in. GLD5560LSS Stainless Steel Built-in Dishwasher

Kenmore Ultra Wash Dishwasher (Mod: 665.1373) makes bad noise after the tub fils and the pump starts running. (Not sure how to describe noise.) Bad pump? Other? I have checked for anything obstructing rotating parts and that is definitely not it. My guess is something wrong with the pump, but not sure. If so, I'm wondering what my options are. Like are their common problems with pumps that can be fixed at home? Replacement?


Definately sounds like a pump on its way out. Probably not the pump itself - but the starting capacitor.However it may be cheaper for you in the long run to have a professional out to diagnose the problem instead of throwing money into it blind ... Dishwashers

Had the Northstar 3000 psi Pressure Washer for 2 months and it started leaking oil from the pump during use. Took it to Northern and they are replacing the pump under warranty but said it was likely because I was using quick connects on my garden hose coupling and that was restricting the water flow making the pump overheat. They said never to use quick connects on the garden hose unless the opening is at least 5/8". Does anyone make such a quick connect? I hate having to screw the garden hose o


It is easy to check if your hose and quick connects are supplying enough water to the pump. Your pressure washer gallon per minuite requirements are printed on the machine and also on the pressure tips in GPM. Your post indicates 2.5 gpm but check yo ... Northstar Pressure Washer 3000 PSI

We discovered broken glass dish in bottom of dishwasher with some pieces below the bottom pump area. Shortly after the washer is making a louder noise during operation time. The water pump is quite when filling but after fill the noise comes during the wash time. The heat element works fine. What can be done to quite the wash cycle????


Sounds like you have broken glass in the wash pump you will have to remove pump from sump and clear also check the drain pump.good luck let me know how it goes ... KitchenAid KUDK03ITBK Built-in Dishwasher

Have a Whirlpool Model GU1200XTLQ3 that makes this God awful noise when running. Did what your post said about cleaning the chopper and found glass. Replaced it back and I'm still getting the noise. Is there a way to check the pump from inside. In other words, if I take the chopper back is there a way to check out the pump


... Whirlpool Dishwashers

Bosch dishwasher SHX46A05UC/40 is making noise when draining. I have cleaned the screen and hose back to the drain and removed all debris. So it seem to be the 'drain pump'. But replacing it - now that seem complex - is it? Looks like I would have to stand the DW on its head and remove the base and then replace the pump. Anyone know if I am on the right track? Could it be something else?


... Dishwashers

I have a sears pressure washer, model 580752300. The pump on the underside vibrated lose and broke a couple screws. It came off and the oil drained out. I replaced the screws and it's ready to go except I can't find out how much replacement oil to put back in. Sears has larger containers but won't tell you how much oil to put in. However, there's a pricey pre-measured container they want to make you buy. Anybody know how much oil goes in that pump?


... FAIP Non Marking Pressure Washer Hose 4000 Psi, 50ft. Length

Kitchenaid KUD124SE DISHWASER SUDDENLY STARTED MAKE A GRINDING NOISE DURING LAST DRY CYCLE. TRIED RINSE AND ALL I GOT WAS GRINDING NOISE. BELIEVE IT TO BE PUMP. NEVER WORKED ON ONE. FIRST ALL IS IT MOST LIKELY THE PUMP AND IF SO HOW HARD TO REPLACE? tOM


You most likely have either a piece of broken glass or hard food debris in the pump. There is a cutter within the pump designed to grind food debris and flush it away. However, you can take off the lower wash arm, remove the (recessed) s ... Dishwashers

The eco light is flashing constantly on my Dishlex Global 300 dishwasher, it is making a noise like a pump is running continously, but the unit will not operate. Can you give me some possible faults and solutions. Regards Dave I have the same problem. The Eco light flashes and there is some sort of noise, not sure if it is a pump or a solenoid, but thats as far as it goes. A friend gave me the machine after aservice tech told him the main washer motor was gone. i have fitted a new motor, but


Its an overflow of water into the base of the machine.There is a float switch in the base of the machine in a small plastic dish.There is a metal cover with 2 small bolts that have to be removed to get to it.get the overflow c ... Dishwashers

When I replaced my garbage disposal I forgot to remove the knockout tab that would have allowed my my bosch SHE58C05UC dishwasher to drain into the disposal. I discovered my error the first time I ran my dishwasher and discovered that none of the water had drained. I then removed the knockput plug and reattached the drain line. My dishwasher now drains correctly but makes a loud sound whenever the pump turns on. Have I ruined my pump or is there something I can do to eliminate the loud noisy pum


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thank You for using\015\012FixYa. To start with check the pump and try to clean it out, then check drain\015\012hose for any obstructio ... Bosch Dishwashers

Pressurized water sprays out bottom of pump but no visible cracks, seals or washers maybe? Are these parts available, I only see a replacement pump complete unit... Unit has less than 10 hrs use.


... Craftsman 2500 PSI Briggs Stratton Powered Pressure Washer

The dishwasher only makes the loud rumbling noise during the initial wash cycle, not during the cycle when it is pumping water out of the dishwasher and into the drain. I found some dental floss wrapped around the blade shaft when I cleaned the area out. The noise is now less but it is still there. I am wondering if the blade got twisted or the shaft got bent.


... Maytag 24 in. MDB9750AW Dishwasher

I have a Bosch SHX46B02UC dish washer that now makes some louder pump noise than in the past. Sounds like it's pumping without water present and has lots of humming and such noice. Any idea here?


... Bosch 24 in. SHX36L05UC Stainless Steel Built-in Dishwasher

My cda Dish Washer (model CW494/1) makes loud grinding noises during the cycle. Post cycle there is a black residue remaining on all of the plastic parts inside the dish washer (utensils basket & filters). Is the pump breaking down internally?


... Dishwashers

I have a whirlpool ADP4404 5 dish washer. It wont pump out the water and the pump just makes a humming noise, as though it is struggling to work. Machine is about 5 years old and is used almost daily


... Whirlpool Dishwashers

I have an asko D3450 dishwasher. Washer makes buzzing/humming noise at start of cycle and then randomly through cycle. I checked the sump and pump appears to be clean and impeller spins freely. The cycle seems to work ok. Water is pumping out ok. If you open the door to stop the cycle, the buzzing will continue for a few minutes then stop. If the cycle is restart, the buzzing starts again. The vibrations seem to originate from under the lower spin arm.


If the sound is a bussing - it is the capacitor mounted to the pump. It is failing.Shown here (big white cylinder on right of pic).. ... Asko 24 in. D3450 Dishwasher

I have a Generac pressure washer, model #01450-0, with a Honda 5hp motor. The motor runs fine, but the pressure hose pulsates as if the pump is intermittently making pressure, and the pressure out of the sprayer is about half of what it should be. A friend suggested replacing the seals in the unloader. I bought an unloader kit, replaced everything and it still runs the same. It will build a small amount of pressure, spray for a few seconds, then the pressure dropps to almost nothing. Any help ap


Take a small diameter wire and poke thru the discharge hole of the spray head to clean out.\015\012Second time in 6 months that I had the same problem. The problem is alway in the spray head. ... Pressure Washers

Broken plate in dish washer. Pump is now making noise. How to take pump out and clean?


At the bottom rear of the dishwasher there is a cover over the sump. remove this cover and below there should be water in the sump. feel down in this area and clean out the trash. there is also a metal cutter in this area that chops up small particl ... GE Nautilus 24" Built-in Dishwasher

We recently purchased a new pump for our frigidaire gld4355rf dishwasher. The old one started making grinding noises. When we moved the dishwasher it had leaked due to a failure of an interior seal. Our new pump is now making the same grinding noise but it is not constant. When my husband adjusted the pump by using his hand when he got into a certain position the noise stops. We keep the screens clean. Is there an issue with the pump in this model?


... Frigidaire GLD4355RF Dishwasher

I can not get the water to drain during a normal wash cyclr. When I press the start/restart button twice it makes noise but no water comes out the end of the drain hose. I have put a shop vac on the end of the hose and can get water out that way but it appears not to be pumping. The washer sits for up to 6 months at a time without being used. Thanks for any help Ted Berry Placencia, Belize Central America


Teddy,\015\012\015\012Buy a new one...then go fishin!\015\012\015\012Richard Vantine (ret'd Colonel...USAF) \015\012Bingelrade, The Netherlands ... GE GSD5310D Dishwasher

I have the Kitchen aid KUDS01DL dishwasher. It was working fine until last week. When starting a cycle, the washer fills with water. Once filled, the motor makes a humming noise and does not circulate the water. I end up stopping the cycle and the discharge pump empties the water. I took apart and cleaned the basin this morning. I did find some random garbage but it did not seem blocked. Do you have any ideas?


... KitchenAid 24 in. KUDS01DLSS Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1365 seconds