Having problems with your Fisher and Paykel Dishwashers ?

Model 913T-shorting out trip fuse in electrical

\015 Model 913T-shorting out trip fuse in household electrical board-washer ran a cycle on ECO wash for first time in years and then refused to start again-no power to panel and would not select normal wash after ECO wash was selected proir to losing total power and shorting house circuit.\015

Answers :

Well, this sounds pretty severe. It sounds like the machine control could have some pretty good issues. The question here is how far do you think you can go with the troubleshooting end of things here? Do you have a multi meter? Do you have some tools? Have you ever Taken anything like this. I can help, but you need to be able to start by taking the top console off and look for the tech sheet. Then you need to do visual inspection of the electronics.
Repair Help & Product Troubleshooting for Fisher and Paykel Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Model 913T-shorting out trip fuse in electrical


Well, this sounds pretty severe. It sounds like the machine control could have some pretty good issues. The question here is how far do you think you can go with the troubleshooting end of things here? Do you have a multi meter? Do you have some tool ... Fisher and Paykel Dishwashers

IDL750 - Fuse trips when turned on. HELP! We had some electricians here to install a new electrical socket for a new fridge. They put the new socket in the same wiring as for my existing dishwasher!! The first time I tried to start the dishwasher cycle with the new fridge plugged in, the circuit box fuse tripped. Now, even with the fridge turned off, the dishwasher makes the fuse trip when turned on. Is there a fuse inside the dishwasher that has blown and needs to be replaced? or a ground brea


Hi.The first step is understanding if the problem is the socket or the appliance. Find an extension long enough to reach a different socket. Move the appliance to reach the power cord, and connect the dishwasher to a different power sock ... Indesit 24 in. IDL700 Built-In Dishwasher

Model d2pdwi 854234715810 dishwasher trips house fuse part way through wash cycle. Rinse cycle works ok and water is comming in and can be pumped out. You can hear it clicking like its trying to activate something 1-2 time and then trips fuse.


... Whirlpool Dishwashers

My Beko D3422 FS was washing normally and the residual current device tripped approximately half way through the cycle. I have unplugged the dishwasher and checked the plug socket with various other appliances. None have tripped the RCD. I have stripped the Dishwasher to look for any disconnected terminals or shorted wires and cannot find anything obviously burnt or any signs of shorting. The 13amp fuse in the dishwasher plug is fine. Are there any components I can test or replace which wouldgi


... Dishwashers

MAINS ELECTRICITY FUSE TRIPS WHEN DISHWASHER TURNED ON


Hi, I think you will need to check the heater or the wash pump, as these are the first things to energised. IOf yo could give me some more information then i could tell you where to after these things have been tested ok!\015\012Get back to me. ... Tricity Bendix 24 in. DH102 Free-standing Dishwasher

We have an Hotpoint FDW70 Dishwasher that for some time has had an A10 fault which although stops the machine some times 70% of the time it does a full cycle. However it is now tripping out the electric at the mains. It is not RCD protected, but does not blow it's own 13amp fuse or that of the fused extention lead it is pluged in to. Tends to blow after about 5 minutes. I know about the fault code A10 being 'Fill Valve Triac' but as not an engineer what is that? and what parts are needed and or


Hi the fill valve triac is the plastic vlave that the inlet hose connects to you can get them for about £10 you reset the machine after replacing it by switching it on, pressing the power button leaving it off for about a minute then switching ... Dishwashers

I have a aeg 43070 vi dishwasher It keeps tripping the circit breaker on the house fuse box . I have reset the leak cutout by dipping the dishwasher back and stopped the warning sound,but went for about a minute and then trip the electrics again . any ideas whats wrong ?


I assume you are refering to the earth leakage circuit breaker. This trips when a earth leak fault has occured. The normal cause for this could be\015\012A) Water leaking via a pipe at the bottom comming in contact with one of the electric moto ... AEG 23 in. Favorit 44070Vi Built-in Dishwasher

Power washer - model jcb-pw20tss. TSS=total stop system. seems to be ''stuck'' on my model. Can you suggest method to free up and restore pressure which will allow me to switch on machine again. Mains electric =OK Fuse = OK Connected to water supply =OK


... Pressure Washers

Stopped mid-cycle by blowing fuse. Cannot remove water from machine. Every time I switch on it blows the trip again. I tried leaving it for a while in case water had got into the electrics but after about one second the fuse went again.


Can be the drain valve/ drain pump is faulty and so since it is in this cycle the drain current is too much for the fuse to blow.\012So recheck by disconnecting the valve and putting fuse in , if the fuse stays then it is confirmed. if not the ... Miele 24 in. G645SC Plus Free-standing Dishwasher

Own a Frigidaire Dishwasher Model Number FDB4315LFSO and now after about 2 years suddenly the display will not light and function anything. Without pulling the power panel off the whole line circuit seems to have power as they have my disposal unit tied into same electric line and that runs and so does everything else and no breaker is tripped. Is their a reset somewhere to check or any ideas what can casue the display panel not to function any commands at all. Nick


... Dishwashers

Dishlex global 300 seems to be shorting out mid way through a cycle and tripping the fuse at power box what could this be?


Check the fuse in the console and also the door switches for continuity.The door switches will stop power if they are not being depressed\015\012because the door isn't shutting perfectly or one of the switches has\015\012failed. I would be lo ... Dishwashers

When it is swiched on it trips the main electric residual current device (fuse)


If you're not an electrician get an expert in or replace it. ... Dishwashers

Dishwasher won't switch on but fuse is ok? In fact each time we switch it on it trips the electric, have turned upside down etc, but cannot see any obvious problems, any ideas? Its a SMEG DWD912CSS. Thanks


As this is a serious electrical fault (live fault to earth) I would have an engineer check it over before using again. ... Smeg DWD612C Built-in Dishwasher

My dishwasher blows the mains electrical fuse every time i turn it on it is a zanussi model da 6142 ( 6 mths old )


You need to get under your dishwasher and check the wiring to it... most likely it is grounding to a metal part down there... make sure all the wires are nutted together tightly and if you see a mark where arching has occured and a burnt wire, strip ... Dishwashers

My whirlpool dishwasher model DU800CWDB5 stopped in middle of rinse cycle does not work at all acts as if no power checked fuse box no breakers tripped


... Whirlpool Dishwashers

I have a Whirlpool dishwasher, model DU943 that's under 7 years old. I went to use it last night and it won't power on. I tried selecting all of the cycles, but the dishwasher never came on. I looked through the troubleshooting tips in my manual (like checking the circuit breaker for a tripped fuse, which was fine) and I still have a problem. what else can I try? thanks.


Hello- This unit has a thermal fuse inside the door panel on the control. This part is replaceable. If it is bad, replace.- and would suggest not using heated dry as this is most common cause of fuse failure. Let me know if this info helps- have more ... Whirlpool Dishwashers

Craftsman model 580.752020 electric pressure washer. First time I used it worked for about three minutes then the motor stopped. I cannot get it to start again. Plugged into a 15 amp gfi circuit which did not trip. The light on the plug is red as per instructions. Unit is beyond warrenty. What to do?


Turn off water and machine electrics.remove high pressure hose from front of machine, this may be tight if there is still pressure in the system.turn on water, when water comes out of machine hose outlet turn on machine. does the ma ... Electric Pressure Washers

Completes programme up to drying cycle and then everything on that circuit goes off as electric trips out . Fuse in machine does not blow.


What is the make and model. bosch units has a big recall on certain models. ... Bosch Dishwashers

Hi, I have a KitchenAidDishwasher (Model KUDP01FL). It's worked well for a few years. Yesterday, when we went to turn it on, none of the lights on the buttons were on. WE can't turn it on at all. The fuse box looks fine, nothing is tripped. Any ideas?


Kill the power to the unit. Pull the control panel down to access the control board located on the right hand side of the panel. There will be 2 wires coming in to a white plastic clip on fuse located on the side of the control board. It will have a ... Dishwashers

I have a Craftsmen 1800 PSI Electric Pressure Washer, Model 580.752020 and it keeps tripping.


Without more information than you have provided, I would think that yoour motor has been damaged by over use or by using too small an electric cord or too long a cord. The overload which is most likely a thermal overload is getting too hot. ... Pressure Washers

Bosch SHV 4300 Dishwasher stopped in mid cycle Power Lights now don't come on No Power Will not run. Main fuse in electrical box not tripped.


... Bosch Dishwashers

My dishwasher had an electrical short. I fixed that but it still has no power. Does it have a fuse somewhere?


... LG 24 in. LD-12BS6 Stainless Steel Free-standing Dishwasher

Hi, i have inherited a diplomate dishwasher. It is now tripping out the electrics. I have tried to find model number but all that is visable is the serial and service numbers.


Your heater element may have an electrical leak down to earth the circuit breaker will detect this and trip. The only solution is a new element ... Dishwashers

My Beko dishwasher model number DWD 4310 has stopped working and now trips the electricity when you turn it on.


Dishwashers are appliances that work in the kitchen to clean dishes. It\015\012has rules to govern its use and when those rules are broken, the\015\012dishwasher will fail to work. The General Electric dishwasher is a\015\012great addition to ... Dishwashers

I have a stoves dishwasher i do not know model or serial no only just its a stoves DW 60 it turn on but as soon as the door is closed to start the wash it blow the trip in the fuse box


Its one of two things. Either its your heating element or your motor. Look underneath and also inspect for water having possibly splashed around. Remove both element wires from terminals and place them safely as not to touch anything when testing ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1040 seconds