Having problems with your Fisher and Paykel Dishwashers ?

I have a double drawer dishwasher. On the upper one, the cycles jump to different settings merely by closing the drawer. On the botttom one, the setting is stuck at rinse and I can't change it(I tried cleaning the control) Any advice?


Answers :

Sounds like you may have a bad unit control board with cold solder joints on it,and too you could have a high resistance ground and by merely bumping the machine you make and break these connections,check all chassis grounds and inspect the circuit board for weak dull connections,its around moisture so this is always possible
For the bottom drawer have you tried to check if the childlock is not on. Not sure what is the exact model you have, but the manual should tell you how to check and disable childlock. Are you able to start the rinse cycle?
\015\012
\015\012For the top drawer I would still check if there is any contamination on the touch switches at the top inside of the drawer. Are you able to start the unit even if the cycle jumps to different settings?
\015\012
\015\012Please provide model no. and your observations to my above questions so that I can try to help you to find the cause of the problems.
Repair Help & Product Troubleshooting for Fisher and Paykel Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a double drawer dishwasher. On the upper one, the cycles jump to different settings merely by closing the drawer. On the botttom one, the setting is stuck at rinse and I can't change it(I tried cleaning the control) Any advice?


Sounds like you may have a bad unit control board with cold solder joints on it,and too you could have a high resistance ground and by merely bumping the machine you make and break these connections,check all chassis grounds and inspect the circuit b ... Fisher and Paykel Dishwashers

Just looking for some advice on removing the drawer from my servis washing machine, sorry I dont know what model it is. I need to clean the powder drawer but cant find any way to remove it from the machine. There is no internal part marked push that i can see and im wondering if i need to unscrew the four screws around the drawer. Help please! Cheers


Send an email to this address asking for the user guide for your model \015\012\015\[email protected] ... Servis Dishwashers

I have a Fisher and Paykel 2-drawer dishwasher. The top drawer is stuck in the rinse cycle and I cannot change it to another cycle. Please advise.


Assuming the controller of the top drawer is still ok, take a clean damp cloth and wipe the top panel where the program keys are located. \015\012\015\012If nothing happens, you will have to check if the controller connector is not loose. ... Fisher and Paykel 23 in. DD603H SS Free-standing Dishwasher

Dishwasher is stuck on one wash cycle - cannot make changes


... Jenn-Air 24 in. JDB1100AW Built-in Dishwasher

I have the DD6031 fisher Paykel two drawer dishwasher and I cannot change the settings; it is stuck on rinse. Any suggestions?


Disconnect the power to the unit for at least 15 minutes to see if you can "reset" the unit. ... Fisher and Paykel 24 in. DD603H W Built-in Dishwasher

Programme stuck I can't change the programme for the top drawer of my DD603 - its on the rinse cycle and won't move to anything else. Can anyone help?


Try swapping the motor controllers (computers) over between the two drawers to see if the fault moves while doing this give the touch buttons at clean. Any questions feel free to ask. Cheers ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Hi, I have a fisher and Paykel double dish drawer model DD605. A couple of days ago when we opened the top drawer all the lights flashed and beeped in sequence repeatedly and would only stop when the power was turned off or the dishdrawer closed. Today I went to turn the top dish drawer on and cannot change the cycle off rinse. I can push the eco button and the rinse cycle works no problem but I cannot change the cycle. The bottom drawer is running as I write this and appears to be fine. An


Hi\015\012\015\012\015\012Could you please let me know which all lights are blinking/lit solid in sequence from right to left. This could be an issue of drawer lock mechanism or flood switch issue. PLease post back with detai ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Drawers Stuck I've had my dishwasher for a couple of years now. All of the sudden the drawers are extremely difficult to open. I have to use all my strength to pry open the drawers so I can get the dishes out.  It started out as only the bottom drawer having the problem and now both drawers are having it.  It seems to be running fine because the dishes that were in the drawer before it got stuck were cleaned.  And there is nothing blocking the drawer from opening.  It seems like the seal that c


I turned off the electrical breaker for about 8 seconds and it rebooted itself ... Fisher and Paykel 23 in. DD603H SS Free-standing Dishwasher

One drawer totally stuck


I have had this problem too. You need to make sure the top lip of the inside of the drawer is dry. I usually just take a paper towel and dry that area off and then it works. ... Fisher and Paykel 23 in. DD-603 Built-in Dishwasher

The dishwasher is not cleaning. It has left a residue all over the dishes especially colored plastic ware glasses. like it doesn't rinse but i have ran the extra rinse cycle and residue is still there. It has actually stained the dishes. Then ceramic dishes are not clean. And ones on the top rack feel like there is a coating on them that does not come off unless you rinse by hand.


Normal\012 0\012 \012 \012 \012 \012 \012 \012 MicrosoftInternetExplorer4\012 \012\012\012\012\012\012 /* Style Definitions */\012 table.MsoNormalTable\012\011{mso-style-name:"Table Normal";\012\011mso-tstyle-rowband-size:0;\012\011mso-ts ... GE Tritonr XL GSD6260JCC Dishwasher

I have a Fisher and Paykel dishdrawer model ds603. Not sure eactly what happened but my son says that the cycle stopped last evening (and only tells me this morning!). Dishes though appeared to be clean and there was a small amount of water at the bottom. I tried opeing the washer and it was hard to open as though the drawer was stuck on something. I removed the drawer and checked the rollers and they are fine. I realised then that the drawer is getting stuck on the inside lid that provides the


The best thing to do is to remove the rack,drawer completly,and close it up,see if it will come on,and run all threw the cycle.If it does,then put the rack,drawer on the track.The rollers could be,well,not snapped all the way on.It will be in that ar ... Fisher Dishwashers

I have a maytag mdb4000aww dish washer. The dishes aren't getting consistently clean. I wanted to clean the trap/filter. There's two ports towards the front side. The one on the right i was able to remove and clean. The one on the left moves up and down but i can't seem to be able to remove it (without breaking it). Any advice? Thanks


What must I do if the rinse compartment is plugged???\015\012help please. My moms dishes are piling up. my hands are all pruiny from hand washing!!! ... Dishwashers

The dishwasher isn't cleaning well and doesn't use much rinse agent. I have tried and tried to figure out why the dishwasher isn't washing dishes well and I can't figure it out. I haven't called the manufacturer yet and maybe I should. I've changed the cycles and that doesn't matter. First thing is that it doesn't really use very much rinse agent, so my glasses look yucky. Second thing is that I can tell it hasn't cleaned the dishes well because the inside of the door isn't clean. With a s


Hi, \012I have an older dishwasher also and recently mywife also complained about it not cleaning right... so me being the man I amtried in vain to clean the things... Bought new spray arms online and installedthem in minutes...now the thing works li ... Jenn-Air 24 in. JDB1100AWS Built-in Dishwasher

Intermitttent beeping on bottom drawer of dish washer no error code only cycle to work all the way through is rinse cycle. Have turned off power supply over night did not fix problem. When you press pause button restarts for about five minutes then beeps again. No problem with top drawer. All inside cleaned using correct powder and rinse aid.


Panel control board Call Encompass Parts 1-800-638-3328 ... Fisher Dishwashers

I have the "rinse" error code on my kitchenaid double drawer dishwasher kudd01dppa1. I've turned off the power, then it worked for one load and the code reappeared on both drawers again. What should be a next step? it says in the manual that the "rinse" error code means that something happened to the flood switch...? Can this be fixed without calling out the kitchenaid technicians? thanks


... KitchenAid 23 in. KUDD01DPPA Stainless Steel Dishwasher

After running our dishes through a wash cycle we noticed there was still a lot of food stuck on the plates & glasses etc. We cleaned out the trap but due to the murky water in the well, we also pulled out the racks & removed the bottom plate. The underside was greasy and had a lot of grim stuck to it as well as the bottom of the drawer itself. We washed the filter trap, swing arm and plate in the sink. We loaded it with the dishes that previously did not come clean and ran a full cycle. The


Hi,\012\012\012\012\012I\012have an older dishwasher also and recently my wife also complained\012about it not cleaning right... so me being the man I am tried in vain\012to clean the things... Bought new ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

I have the double drawer dishwasher. It is 3 years old. For about 1 year now one of the programmes - the second one along which is for quite dirty crockery and cutlery (programme is about 99 minutes) - STOPS after about 60 minutes. It bleeps and flashes and the pot wash programme and eco button are on when I open the drawer. Sometimes the programme works right through. No pattern or consistency. Also the dishwasher isn't cleaning terribly well. I've checked the filters as much as I can an


A few things you could do.\015\012\015\012Is this happening with both drawers.\015\012\015\012Take a clean damp cloth and wipe the switches and the inside panel.\015\012\015\012Get a couple of Finish dishwasher cle ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Just installed fisher paykel model 88270 dishwasher, bottom drawer has no power,and top drawer does not fully drain. Cant find another power cord, is there a second one? Cant locate the manual.


... Fisher Dishwashers

My dishwasher is only one and half year old. all of a sudden the dishes seem not be rinsed properly. As if a small coat of thick unrinsed film further stick on thedishes and glasses after the drying cycle I then have to proceed to scrub each dish ,fork, knife and glass... I cleaned the dishwasher with a special product t to clean the empty dishwasher, and the drying rinse agent is on full . Please advise


Try running a cycle with bleach on an empty dishwasher water might be too soft ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

The some dispenser and the rinse aid dispenser seem to be "stuck", soap door doesnt open and dishes appear streaky from no rinse aid. this happened after I cleaned the deposits from under the screen in the bottom of the dishwasher. how do I clean the dispensers?


There is a solenoid which pops open the soap lid after the initial rinse.\015\012\015\012If the solenoid or soap lid latch is faulty, you will need to replace it. In the interim just poar your soap in the bottom of the dishwasher tray bef ... Bosch Dishwashers

1. changing dishwasher settings from the various dishwashing selections (i.e., auto, auto plus, regular, delicate, etc.). I cannot change the settings from one to another. 2. getting film free cleaning results. Honestly this dishwasher has never provided crystal clean (filmless glasses) or completely dries the full load.


... Bosch SHX68M06UC 24 in. Built-in Dishwasher

Bottom drawer stuck on 12 min cycle(rinse only)


Turn power OFF at main power point, then\015\012Turn power ON.\015\012Check that the "ECO" button is no glowing.\015\012Good Luck! ... Fisher and Paykel 24 in. DD603H W Built-in Dishwasher

Kitchenaid kudh03dtss cancel, power, rinse aid and clean lights are all lit and no other buttons work on the bottom drawer. top drawer works fine. how can i reset the bottom panel?


... Dishwashers

Fisher & paykel dw920 can not change washing cycle stuck in rinse


... Fisher and Paykel 23 in. DS603H W Built-in Dishwasher

Model MDB5100AWW, sn 10493315YK. Dishes not coming clean, stuck on food, and cloudy. We have installed new Jet Dry, and operated unit in rinse cycle with added vinigar about 4 times with no luck on cleaning. We do NOT have a water softener. Do we have lime deposits that are not allowing water to properly. Are there components that we can remove and clean? Mike


The problem is hard water. www.dishwasherfilter.com has a product to solve this problem once and for all. It filters the water going into your dishwasher and removes the ... Maytag MDB5100 Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1077 seconds