Having problems with your Fisher and Paykel Dishwashers ?

We just moved in to a new house and the dishwasher's spinning piece was dismantled. We dont know how to set it up and we have a few different pieces that dont really match. please help! Thanks


Answers :

Hi Lorainne.. You ,may be able to get the user manual at this link http://www.fisherpaykel.com/global/customer-care/product-manuals.cfm Should get you steered in the right direction... Hope this helps..
Repair Help & Product Troubleshooting for Fisher and Paykel Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

We just moved in to a new house and the dishwasher's spinning piece was dismantled. We dont know how to set it up and we have a few different pieces that dont really match. please help! Thanks


Hi Lorainne.. You ,may be able to get the user manual at this link http://www.fisherpaykel.com/global/customer-care/product-manuals.cfm ... Fisher and Paykel Dishwashers

I think I am finding small pieces of the wrap from the tablets in the small holes in the spray arms, one wont move anymore??? This is about 10 yr old maytag machine. I tried to clean out the spray arms but dont really know what I am doing. Bought a new diswasher, dont want to use the tablets if they will clog up the works. please advise.


Just prime the sink before you start the dish washer ... Maytag Jetclean II MDB8551A Dishwasher

Cant get the front door open on my kuds25sh no way to get at the screws that secure the unit to the counter i am very good with tools but i dont know the way the mechanism is set up please help my wife is driving me crazy cliff


... KitchenAid KUDR25 Dishwasher

My asko d3530 is making a terrible noise and all the display has disappeared the pump is still working with the door open. please help as we really dont want to spend an arm and a leg getting it fixed. regards anthea


Hello Anthea, Seems that your program controller module has failed and so it is possible that you can end up with an expensive repair. To start with remove the power plug and keep aside from plugging for few hours, now depress on the control panel sw ... Asko Dishwashers

The dishes wont come clean on top rack? the bottom rack is clean..we tried cleaning filter and making sure the wash arm wasnt hitting anything..we tried different wash settings..please help Jessie Oakes


Check that the top rotating arm jets are not block. These often get blocked by pieces of food or other solid particles, this is the normal problem. ... Whirlpool DU1055XTS Built-in Dishwasher

Hi I have a Bosch dish washing machine. The glasses come out cloady and white when washed. It was perfect in the beginning but it is getting worde. The salt is full, the rinsing liquid is full and set right. I used to use the 3 in one capsules, but now I am trying the seperate salt, powder and liquid but nothin gis working. I have also cleaned the washer with that plastic holder filled with liquid a few times, but it doess/t make a difference. Please help. Melani


First thing to try is to use the capsules and see if they work. Try reducing the detergent a little. ... Bosch Dishwashers

Prima lpr601 problem- filled dishwasher up sa normal set the wash pressed button on far right (dont know what it is but needs to be done), closed door and loud raattling so i opened door to make sure all spray arms were clear which they were, closed the door , again the rattling . now the green light has gone out on far right and cant get it back on so program wont start at all. Any advice?? please help


... Dishwashers

I have a frigidaire dishwasher and the top rack all the dishes dont get clean like they should, both set of arms work and we are getting water? through, please help me


... Frigidaire 24 in. FDB1050RE Built-in Dishwasher

My dishwasher BOSCH SGS4802EU/12 dont stop after 92 minutes, wich is the time of one cycle. it take more than 3 hours to finish. I think that can be resolved if y make a reset on the dishwashwer, but y dont how to make the reset. Can you help me please? Best regards. Pedro Antunes


... Bosch Dishwashers

Hi, I get a problem reading " E4". I have now switched the machine off and on again, but still it says the same. Incidentally the machine has already pumped the water out, so the 'overfill" is actually not supposed to be a problem. It is KELVINATOR EXTREME CLEAN DISHWASHER, model KD14SS. Please help, how am I to get rid of this problem, I really do not have the time nor the money to get outside help! Anita Kleynhans


... Kelvinator MDP531RF Dishwasher

Our Whirlpool ADP 6515 has a delay button. When the button is pressed and activated for a 3 hour, 6 hour or 9 hour delay, if we change our minds and want to wash immediately, we cannot disable the button!! How can we deactivate the delay setting to wash immediately? We have pushed the delay button over and over to turn it off but it will remain on the 9 hour delay setting. We are very frustrated. Please help.


Try switching the power off at the wall switch for a minute, then switch back on, to clear the memory. ... Whirlpool Dishwashers

HI I HAVE A GREAT ILIVE INTERGRATED DISH WASHER, BUT NO MATTER WHAT SETTING I PUT IT ON TO WASH IT WASHES FOR 88 MINS, IT DID NOT COME WITH A BOOK AS IT WAS LAST ONE ON SALE CAN YOU HELP WHAT DO I HAVE TO PUSH TO GET IT TO WAS FOR 25 MINS. HELP PLEASE.


Is your display faulty?Does the timer count down?Does the run time of the dishwasher change even though 88mins is displayed?if all else fails run the dishwasher from a plug in timer, turning it off after 25 mins : ... Dishwashers

Hi i have a technik dishwasher it has flooded the kitchen, i managed to get all of the water out of the machine but now the pump seems to be running all of the time, someone has told me there is a flood switch on the wachine that will need re-setting but i can not find it can you please help me please either email me or ring me on 07875666327 uk number. many thanks chris


Drain pump is running all time because there is water in bottom tray. tilt machine back to 45deg and water will flow out. otherwise, take front panel off and mop water out. alll that is required to reset flood switch is to get rid of the water ... Tecnik Dishwashers

PROBLEM! Hello, When we turn on the dishwasher and set it to any setting it beeps once, appears to work, then beeps again, and the first light flashes. Then the inside noises stop and the light continues to flash until it is turned off. We have cleaned the filter, and added salt, but this has not affected it at all. Please help! Thank you.


... Indesit 18 in. D41 Slim-Line Free-standing Dishwasher

Hi, how do i install my dishwasher....i dont know where to connect the water supply pipe to as i dont seem to have a tap under the sink for it to be connected to, can anyone help please.


You'll have to tap into the hot water supply for the sink to get a connection for the dishwasher. This is a moderatley difficult plumbing task. If you don't have plumbing experience, it's probably best to call a plumber.\015\012\015\012 ... Dishwashers

Hi, I have a bosch SGS43E02Z dishwasher that dont seem to wash clean. It would seem that some times the presure from the spinning washers arnt working well enough as it dont even move rice from plates stacked next to each other. i have checked all filters inside the machine and if you start a wash program the sprayers work and the water is splasing. please help with sugestions.


... Bosch Dishwashers

Dishwasher i moved into a house and it has a Bauknecht dishwasher and i dont know how to use it please help me.


Have only worked on them a few times but no problem to use. literally select program, close door and start. you won't break anything by trying it out.put detergent in the dispensor and rinse aid in the rinseaidv despensor. if in a harrd water a ... Bauknecht 24 in. GSF8971 Built-in Dishwasher

Model SHU43C06UC a mouse eats a poliestirene circular piece like a float attached to the right of the bottom plastic base of the dishwasher under a grey plastic lever, now the DW runs but the cycle in the display doesn't make progress and it doesn't make any noise that indicates the water are running, help!, please advice!


Hi there sounds like your dw is in flood protection remove the poliestirene float compleatly and make sure the lever that sits on top of it is in the down position, hope this is of some help.\015\012\015\012pat no for new float is 165301 ... Bosch 24 in. SHU43 Built-in Dishwasher

We have just been given a bosch sms6011 dishwasher and have no instructions for it, all we need to know is what the different settings mean. Can anyone help? Thank you.


Try the website: http://www.boschappliances.com/site_tools/DocumentDisplay.aspx?menu_id=27&menulev ... Bosch Dishwashers

KUDG25SHBT1 Kitchen Aid dishwasher child lock is on and cant get it off. Pressed and held the start button and now the child lock light is blinking but dont know what to do next?? Please help!! Lexi


... KitchenAid 24 in. KUDS25 Built-in Dishwasher

The start button is flashing on the dishwasher and it wont start,i try changing the different cycles but it just wont start,the bottom of the dishwasher was full of water in which i drained it and took out some type of filter as i thought it may be causing a blockage which it wasnt as i still have the same problem....please help...my name is adam


What type of dishwasher do you own? Model, Brand?It could be a touch pad or control board issue. ... Whirlpool Dishwashers

I have a nardi dishwasher and it does not wash the dishes properly. sometimes the water does not circulate.Sometimes there is no water at all. I use the proper finish stuff, dishwash salt, tablets rinse aid. each time I call an engineer out they all give me a different diagnostic. HELP. Please


Nardi dishwaser water will not drain away after wash cycle. ... Dishwashers

We have a kenwood kdw12st3a dishwasher - ever since we have had it, it has been nothing but trouble. It constantly flashes e4 so we have tipped it and drained the water out of the bottom (as advised) and it works for a couple of days then happens again. Now it refuses to work at all - cant set a programme - nothing at all - please help!


To clear the fault you need to remove the two baskets from the dishwasher.Slide it out from under the worktop and lean it forward to about 45 degrees.If it is already full of water, turn on the power whilst pushing the program ... Dishwashers

Not cleaning dishes especiialy the ones on top rack. Found some broken glass pieces in bottom. No obstructions in line leading up to top washer. It looks like the pump is not pumping enough water pressure and/or volume for the top washer to function properly. Please help. Whirlpool Quiet Parnter I. Approx. 2-3years old.


If you remove the filter in the sump area underneath the lower dish rack (removing the screws to do so) you may find debris blocking/jaming the impeller area. Be very careful of almist invisible broken glass. Inspect the impeller to make sure it is ... Dishwashers

I am stuck on the rinse cycle. it wot allow me to set it to anything else including a normal wash. Have tried unplugging but its still only rinsing. Please help!


Unplug, remove tub by rextending out fully and uncliping lock tabs at front of slider. lift tub out and support on a chair. the circuit panel on bottom left floor area needs to be dried out underneath, there is a water sensor below this panel and if ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1134 seconds