Having problems with your Fisher and Paykel Dishwashers ?

Our machine has a F1 error - Fisher and Paykel Dishwashers


Answers :

F1 error is usually a flood error which means water is leaked into the base of the dishwasher. YOu will need to provide the model number for a more clrearer diagnosis.
Repair Help & Product Troubleshooting for Fisher and Paykel Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

We just installed a Fisher & Paykel DD603 dishwasher. Intially it would not drain correctly. And, proceeded to flood the bottom and set off the F1 error code. I dried out the bottom to get the F1 code to stop, which it did. After adjusting the leveling the dishwasher drained both drawers correctly, once. A few minutes after the rinse cycle had finished and the drawers were empty of water the F1 code started again. Now it will not go away unless I unplug the machine. I dried out the bottom very w


HI. The original code(f1) is in reference to a overfill condition. This may be a clogged drainage Assembly. This condition will usually cause the control sector to short out if not corr ... Dishwashers

Our machine has a F1 error - Fisher and Paykel Dishwashers


F1 error is usually a flood error which means water is leaked into the base of the dishwasher. YOu will need to provide the model number for a more clrearer diagnosis. ... Fisher and Paykel Dishwashers

F1 Error code on fisher paykel softouch dishwasher


F1 means that water is in your basepan--- you can pull the bottom\015\012drawer out and soak up the water with a towel... you will have to use a\015\012hair dryer to dry underneath the control sensor in the back left corner. ... Fisher Dishwashers

Fisher and Paykel Error code Ho - Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher


... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

My dishwasher's lid is stuck down and won't retract. I have a Fisher and Paykel DD605 dishwasher, and I think I must have placed some dishes in there that were too big for it and the lid got stuck. It's now showing an F7 error and refuses to do anything other than beep at me. I've tried turning the power off and back on, but it persists with the error. Is there a way to get it to reset and retract the lid? I've read that in situations like this, when people get repair technicians to com


The error code f7 stating that "the communication time out error"this are all the reason for the error1.the motor control micro has crashed and is not responding to communication request.2.the hardware communication link from ... Dishwashers

Error code. Fisher and Paykel Dishwasher


Well since you asked on the 5th July, and no reply, doesnt look like you may get one. I thought thats what this site was about?? ... Dishwashers

Fisher Paykel Dishwasher Door Open error code


If it is a dish drawer type there is a clip at the rear of the drawer that holds the drawer closed. you will need to withdraw the drawer partially to look in. with the drawer open the fingers should be facing towards you. If not you will need to reac ... Fisher and Paykel 24 in. DD603H W Built-in Dishwasher

DS603 Fisher & Paykel U1 error code ..(see our previous errors we've listed) we have now pulled out the yellow water valve that goes up behind the front panel and at the other end by removing the drawer and plastic protector thingy - we checked that there were no bedris or calcium buildup in the valves ends and filters and replaced it all. So we put it all back to gether as we could not see what would cause this error, only to find that it worked - water came into the machine but about 4 mins in


This product is total ****.\015\012Pull it out, call whoever sold the **** to you\015\012and tell the to come get it and shove it up their ***.\015\012Then buy a Bosch and live a happy life.\015\012The design is moronic. The machine is like the old\ ... Fisher and Paykel 23 in. DS603H W Built-in Dishwasher

F4 error fisher & paykel nautilus dishwasher sometimes this error comes up and it seems to occur about 10 minutes from the end of the cycle. it doesn't happen all the time. the user guide does not specifically address this error code.


F4 is a heating error- dishwasher has not reached temperature in allocated time. If intermittent fault, problem is usually with electronic board, which has temperature sensor attached. Sometimes the wiring to the control board burns out and can give ... Fisher Dishwashers

E4 error fisher and paykel dishwasher


There is a Y shape pipe under the sink's piping & it was blocked so I drilled & open a hole then the machine could has drained & worked. ... Fisher and Paykel Dishwashers

Fisher & Paykel dishwasher drawer won't run, beeps F2 error code


Craig, we had virtually the same situation.  The repair man  came and it took 2 minutes to fix.  The problem was that the bottom drawer had not been used for a couple of years and thus the impellor had jammed.  to fix it take out ... Fisher and Paykel 24 in. DD603H W Built-in Dishwasher

Error code 888 fisher & Paykel dishwasher - Dishwashers


... Dishwashers

Dishwasher error have a fisher paykel ds603i, top draw is receiving an error, constantly beeping with red light showing, bottom drawer is running


The error was a flood fault, water was not draining from either of the drawere, I removed the bottom drawer, dried drip pan and used hairdryer to dry fault sensor, the dishwasher then reset itself and works fine. ... Fisher DS603W / DS603B / DS603I Dishwasher

Our 2 drawer Fisher and Paykel dishwasher is automatically starting its own washing cycle (well, motor starts, but no water appears to be entering), then it shows F1 error message and a spanner icon flashes. Within 30 secs of this occurring on one drawer, this starts on the other drawer. Only way to stop is to switch off at power socket. Any idea what the error message is telling me?


... Fisher and Paykel 24 in. DD603H W Built-in Dishwasher

We keep getting an E4 error on our Fisher and Paykel DW60CSX1 dishwasher. It is only new and initially worked fine, now the error indicates the drainage hose is too high, however it is where it says to locate it according to the diagram


... Fisher and Paykel Dishwashers

F1 error code on both dishwasher drawers. - Fisher and Paykel 24 in. DD603H W Built-in Dishwasher


Unit is in flood protection mode (caused by leak), can be cleared by removing bottom draw and drying the residual water around and under the Rfi/flood sensor board. This problem is usually caused by iether the support that suspends the wiring and hos ... Fisher and Paykel 24 in. DD603H W Built-in Dishwasher

My fisher and paykel dishwasher drawers is giving me an F1 error code, won't stop running and is acting like it's possessed.


... Fisher Dishwashers

U2 Error Fisher Paykel dd-602 dishwasher


Hi there, Error U2 -Possible Causes - LoadingCheck loading to ensure no items extendbeyond the height of the drawer.Good Luck!neo ... Fisher and Paykel 24 in. DD-602 Built-in Dishwasher

F4 error - Fisher and Paykel 24 in. DD-602 Built-in Dishwasher


 It means your filter is dirty. Remove metal plate at bottom & scrub with a toothbrush. Clean arms as well.Clean all around the door & pull out the lift out filter, scrub clean with a toothbrush.good luck ... Fisher and Paykel 24 in. DD-602 Built-in Dishwasher

F1 Error on Fisher & Paykel Dishwasher - Model 920


Your dishwasher is in flood protection mode. feel free to live chat if you'd like me to talk you through the repair cheers ... Fisher and Paykel 24 in. DD-602 Built-in Dishwasher

Fisher & Paykel dishwasher model dd602 error code F4


Hi there,\012It means your filter is dirty. Remove metal plate at bottom & scrub with a toothbrush. Clean arms as well.Clean all around the door & pull out the lift out filter, scrub clean with a toothbrush. ... Fisher and Paykel 24 in. DD-602 Built-in Dishwasher

My fisher and paykel dishwash has and error F1


Since you did not provide the specific model, I checked a few different models at the FisherPaykel website and F1 appears to mean your flood switch has been activated and to shut off power and call a repair man.. Please provide specific model numbe ... Dishwashers

Bottom draw displaying U1 error message - Fisher and Paykel 24 in. DD603H W Built-in Dishwasher


There is no water coming to the drawer.\015\012\015\012This could be due to several reasons. The tap must be on as I presume the top drawer is working.\015\012\015\012Could be one or more issues like Inlet solenoid,controller ... Fisher and Paykel 24 in. DD603H W Built-in Dishwasher

U3 error code - Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher


Error code U3 could mean the drain pump could be blocked.Remove the trays and the impeller arm. Empty the water with small container or towel. Open the filter plate and drain filter. Get the motor out and check the cavity for any rubbish ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

I have a fisher paykel dishdrawer dishwasher that i get a F1 error code then it shuts down i have dried up the bottom tray but it will only work for about 1 week and it does it again


Perhaps you need to find out the source of the problem. The F1 code is due to the flood switch at the base of the housing getting triggered by water collecting. You could have a cracked hose or broken actuator arm (this is piece of plastic at the bac ... Fisher and Paykel 24 in. DD603H W Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2018 seconds