Having problems with your Fisher Dishwashers ?

I am installing a DD60Ddouble dishdraw. can you please advise how

\015 I am installing a F & P DD60D double dishdrawer . can you please advise how I adjust the feet as it is impossible to fit the hexagonal socket onto the threaded portion as shown. Thank you\015

Answers :

You should be able to turn the feet by hand. If not, use an adjustable wrench or large pliers- you can turn feet from underneath dishdrawer without having to remove drawer as indicated in the installation guide
Repair Help & Product Troubleshooting for Fisher Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I am installing a DD60Ddouble dishdraw. can you please advise how


You should be able to turn the feet by hand. If not, use an adjustable wrench or large pliers- you can turn feet from underneath dishdrawer without having to remove drawer as indicated in the installation guide ... Fisher Dishwashers

Installation upon installing 24"stainless electronic dishwasher, I don't see how & or any top tabs to attach to under counter top for stadiltion. most diswashers have tabs for wood screws to attach the top of dishwasher to. please advise. theres just thick plastic w/ grooves in it..


Some people put timber off cuts on the top panel to stop the dishwasher tilting forward ... LG 24 in. LD-12BS6 Stainless Steel Free-standing Dishwasher

New KUDL40CVSS includes a piece called Sound Insulation - assembly p/n W10084568. The installation manual does not address where it goes. Please advise.


... KitchenAid Dishwashers

CDA CW497 Integrated Dishwasher. Please advise how to connect the door as I do not have the installation manual and have changed all my kitchen doors, but now cannot get the door on the dishwasher.


Please note the link to download this manual has now changed to http://www.cda.eu/Downloads/Manual/2176/cw497_im.pdf ... Dishwashers

I have an lg ldf7811st and the bottom arm will not turn. I purchased the part 1267558 (motor assembly, vario spray valve) to repair it and I need instructions on how to install this part. Please advise.


You need to uninstall dishwasher and tip it backwards on the bottom of the dishwasher you will see a square panle remove the 2 screwsand replace the part then proceed in revers to put together ... LG 24 in. LDS 5811ST Stainless Steel Built-in Dishwasher

I have just installed a ADP5000WH and it successfully completed 2 washing actions. Now when I try to do a third load it comes up with Error 1 which according the manual means longer inlet time and the cause is the faucets are not opened. Nothing has been changed since the first two loads. Can you please advise.


... Whirlpool 24 in. DU920PW Built-In Dishwasher

I have a new LG Dishwasher LD120W1 purchased on 6/11/09. Have only used it approx 3 times. When I turned it on today it started up and after a few minutes it starts whistling and does not fill. Have looked at filter and spray arms, all clear. Could you please advise what else to do or look at. I can pull it out to look at hose it was installed by a plumber.


Hi,I would Glad to tell you what needs to be Done!! But, as the Dishwasher is Under Warranty, give them a call. Why to spend any Money, when the washer is under Warranty :) Now, It sounds like a Water Pressur ... LG Dishwashers

Hi There, I have a F&P Dishdrawer Model DD601v2. The top drawer has come up with an error message U3. Can you please advise what this error means and maybe how expensive it could be to repair or whether it's worth repairing? Many Thanks


This applies to all DD601 ... Fisher and Paykel 23 in. DD-603 Built-in Dishwasher

Just installed bosch SHE68E15UC dishwasher today and during first cycle E15 error came up and unit will not go into another cycle or allow me to program anything else - sanitize and rinse aid lights are blinking - water went into the machine and it started filling the bottom and wasnt draining - i then adjusted the filter and the water drained - but e15 error persists - what should i do - is it install issue or machine issue - please help- thank you so much


... Dishwashers

Could someone please help me i have a lavor 160 superwash and every lance works except when i put the turbo lance on i get full pressure for a few seconds then goes low then high etc etc it has 2 be something simple so please anybody all advise needed thanks


... Honda Karcher G2400HH-R Pressure Washer

I have a Bosch SHE44C02UC/46 that will finish all of the cycle but leaves a couple inches of water in the bottom. If I pull out the dishwasher and manually active the drain pump float it will drain the remaining water out of the dishwasher. I heard about a cold solder joint on the main controller board but I am not sure if this could be the issue. Please advise wat advise you can. Thanks.


... Dishwashers

I have a Candy CDW254 E/1 or CDW 254 S/1 (not sure as this is the dishwasher in the house we are renting) I have taken the model from the Candy instruction leaflet. Our problem is the dishwasher cannot complete its cycles. If you are not able to help, could you please advise who is the best person in the Nelson area to contact for help with this dishwasher please? Thanking you Karen


... Dishwashers

We are attempting to install new dishlex 203: To install under bench/sink does the worktop have to be removed?... If not, what is the situation with steam protection foil please? Thanks


Look at link below to see how to install under the counter page 13.\015\012\015\012http://www.dishlex.com.au/common/pdf/156989323_DX203.pdf ... Electrolux Dishwashers

When I turn on the GE PotScrubber dishwasher with water, water is leaking out from disher please advise. According from one repair guy, it is related to pump issue please adivse


First try to look and see where the water is coming from,,,the bottom of the unit,,,,or the front of the unit...remember the door has a seal all the way around it and it has to seal correct and make sure the latch is all the way in lock postion ... Maytag Dishwasher

Dear sirs, I own a Kenmore dishwasher Model # 665.17039400. The clean light flashes 7 times and then repeats. It will not run, only the drain button will work. I changed the heating element from advise on another forum. This did not resolve the issue. Please advise promptly as my wife is going crazy without this appliance. Regards, R. Carmikel


... Kenmore Dishwashers

Good evening I have just purchased a Bauknecht GSXP 7427 dishwasher which was to be installed in a kitchen but probkems with the design would not allow. Instruction book supplied but not the installation booklet and in particular on how to fit the decor panel to the front of the unit, Appreciate advise on how to fit the decor panel and where the required parts may be sourced.


... Whirlpool Dishwashers

When I use my Karcher pressure washer it works perfectly until I release the trigger. Instead of remaining silent until I pull the trigger again the motor intermittently, at approx 2/3 second intervals, starts and stops. Could you please advise what is causing this to happen please.


What it is doing is keeping the pressure up in the hose. It is completely normal for it to do that. they all do it. Listen to others in use and it will do the same thing. Nothing to worry about. ... Karcher Pressure Washers

Fisher & Paykel DD603 model Upper Dishdrawer has F3 fault code. cycke starts, then stops within minutes. Water in tub after stopping is not hot. Temp sensor bad? Could you please send pdf of servie manula for dd603 please? Thanks [email protected]


F3 means your dishwasher water is too hot. Go to the link below and it will show you how to determine what is causing the error. ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

I have a Bosch Exclusiv dishwasher (Model SGS 8812 GB) which, from installation in January 2002, has consistently caused glassware to go cloudy. This happens after about 8/10 weeks from buying new glasses. I use Finish Rinse Aid and Salt and have an independent water softener installed. This is proving an expensive exercise, as I need to replace glassware every 10/12 weeks. Have you any suggestions, please? Thank you - Doreen Sheardown


You are sandblasting your glasses. The added salt with the salt from the softener is causing the cloudiness. If you are rinsing the dishes to be mostly clean first and using the suggested amount of detergent you are way over sudsing.#1 St ... Bosch 24 in. SHE43C05UC Stainless Steel Free-Standing Dishwasher

My drawers are both flashing F1 and sound as though they are in high gear. I have unplugged them. Please advise. Please give detailed instructions.


F1 signifies that the flood sensor in the rear of the cavity on the \015\012bottom drawer has been activated. This is caused by water leaking into \015\012the rear of the drawer. I have had the same problem with my own and \015\012also repaired a ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Model KUDI02CRBS1 I used to be extremely happy with my KA dishwasher, but lately dishes are coming out milky and gritty, some dishes still semi dirty. After cycle is complete top inside of door is dirty and soap dispenser door open but some soap remains. Please advise to help me trouble shoot. Please, list from most obvious/simple to worst case etc. Thank you G


Hi\015\012If you are noticing that the dishes are not clean, then there are a few things to check for. Check the soap powder if it's kept in a dry environment. Also try replacing the powder with something like a gel or liquid. Next ... KitchenAid Dishwashers

Heller Dishwasher DWH16 has completed cycle and the door wont open. I put it on again wishful thinking and it still wont open. Can you please advise.


... Maytag Dishwashers

Hi i have a karcher b602 washer it jets intermitantly please advise


... Pressure Washers

Miele dishwasher g1040. all the lights are flashing. I have tried re-setting it according to the user manual. this hasn't worked. Please advise if anything else will work. thanks, Penny


... Miele Dishwashers

My dishwasher is brand new Model FDB1502RGS0. I used it for the first time today. It seemed to be cleaning for a very long time. It was up to 2 hours and I had to leave so I turned it off. How long should it take. That seems like an awfully long time. I kept waiting for the drying mode to start and it sounded like it kept filling up and emptying. Does this sound right? Please advise asap.


Most DW today take a minimum of 90 minutes. Run the hot water from the\015\012sink until it gets hot, then start the DW, this will shorted the first\015\012wash cycle. It is not uncommon for the DW to run 2hrs or more based\015\012upon the water temp ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0417 seconds