Having problems with your Frigidaire 18 in. FDR252RB Built-in Dishwasher ?

Plumbing issues for under the counter frigidaire mini dishwasher

\015 I have a frigidaire mini dishwasher that fits under the counter, plugs\015\012into an outlet and has two hoses. the end of one hose is metal with a\015\012rounded end that dis allows a nut from sliding off when screwed into (I\015\012don't know where!) I suspect this is the intake hose. The second hose\015\012has a gray plastic fitting on the end of it. The fitting is grooved on\015\012both ends and presses into the hose. The grooves are such that it is\015\012difficult to pull the hose out once it is pushed in. I suspect this is\015\012the drainage hose. I am trying to find out what I need plumbing wise to\015\012hook this up. Home Depot was less than helpfull. Thanks.Michael Bradford\015

Answers :

Your right the one with the rounded end and nut is the intake. It is supposed to be attatched to your faucet. Adapters may be needed. The other is the drain hose, make sure it is attatched firmly, you can't just throw it in sink or BIG mess will follow!
Repair Help & Product Troubleshooting for Frigidaire 18 in. FDR252RB Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Plumbing issues for under the counter frigidaire mini dishwasher


Your right the one with the rounded end and nut is the intake. It is supposed to be attatched to your faucet. Adapters may be needed. The other is the drain hose, make sure it is attatched firmly, you can't just throw it in sink or BIG mess will foll ... Frigidaire 18 in. FDR252RB Built-in Dishwasher

When running my dishwasher it overflows and leaks out onto my kitchen floor. Had a plumber in and identified that this issue is not with the plumbing as there are no other issues to the sink.


Sounds like you should check the rubber gasket around the door. if it is torn or ripped it will leak. hope this helps.also make sure where the rubber meets when you close the door that it is al clean from dirt and grim. have a nice day ... Maytag Dishwasher

Our frigidaire professional dishwasher occasionally has an issue where the soap is in the bottom not dissolved. We need to run it again. Can't figure out this problem.


Hi,Here is a tip that will help you with how to clean that dishwasher up and get it smelling good again... ... Dishwashers

Our dishwasher does not drain completely and leaves a bit of water covering the bottom at the end of the cycle. We tried running the disposal during the cycle to see if that clears a drain, but it did not resolve the problem Is ths a plumbing or appliance issue


This might help, i had same problem, right where the dishwasher hose connects to the disposal, it was partially blocked with grease, loosen the hoseclamp, pull off, and scrape it out. ... Electrolux 23 in. ESI6104 Built-in Dishwasher

Not sure if this is the correct model # but I get an F on the light panel that usually displays the time- I know it is not a plumbing issue any other ideas


... Gaggenau GI 230/161 Built-in Dishwasher

Frigidaire 2405 Dishwasher has a direct drain into the floor and is too far from the sink to be able to drain into the sink pipes. Can I add a loop of drain hose from the floor drain up to the counter height, about 30", then back to the floor to mimic the loop that would be created by running to the sink drain? I have been told that these new types of dishwashers require water remaining in the pipes to work properly. Thanks, John


There will be no problem with you adding more drain hose to the unit. ... Frigidaire Dishwashers

Kenmore model#587(Frigidaire) leaks under door. New install. Had machine for a year plus before install. took off front panel- can see water squirting past lower door gasket as wash arms rotate. cause is water running down door during wash cycle piles up in the channels molded into the lower left & right side of the wash tub and pushes out the sides of the lower gasket. looks like a design issue- called SEARS, they just want to sell me a new gasket! go figure. any ideas on a fix?


It does sound like an inner door seal ,however If you get upset at Sears and complain they may help you as they say the squeaky hinge gets the oil..And with Sears the more you squeak the better your chances of results ...Good Luck ... Dishwashers

Frigidaire dishwasher (Electrolux FDB750RCB0) does not move water through the hose to the upper wash/spray bar. The lower wash/spray bar has pressure enough to turn. With the dish washer out from under the counter I can see the water rise very slowly up the translucent hose. If I remove the check ball under the stem assembly in the motor in the bottom of the tub, water flows, but I'm not sure if the top bar turns then (with the door open I see water coming down from the top, but never saw


... Dishwashers

We recently purchased a new pump for our frigidaire gld4355rf dishwasher. The old one started making grinding noises. When we moved the dishwasher it had leaked due to a failure of an interior seal. Our new pump is now making the same grinding noise but it is not constant. When my husband adjusted the pump by using his hand when he got into a certain position the noise stops. We keep the screens clean. Is there an issue with the pump in this model?


... Frigidaire GLD4355RF Dishwasher

Dishwasher does not seem to have power. I have a Kitchen Aid, under counter unit, 9 years old, model KUDS01I. I used it 2 nights ago with no problem. When I push a button, nothing happens, no lights show, etc. It is plugged into the lower half of a duplex socket with disposal plugged into the top. Disposal works, so the problem seems to be with the dishwasher. That also eliminates any issues related to breakers or ground fault indicators, etc. Is there a reset button on the dishwasher? Is there


... KitchenAid Dishwashers

I purchased a Bosch dishwasher and had it installed into my new kitchen. It is plumbed and it does not work, a reapair man said it needs a new motherboard. My issue is that Bosch can't seem to supply central Wi. with this part. The repair place put the order in two and onehalf months ago and still cannot give me a date about when the part will be in. I have owned this dishwasher for five months and have not been able to use it once!


... Bosch Dishwashers

I have a brand new Blanco dishwasher but im unsure if it is a DWF6XP, DWF4X or DWIN7 model. It does not have a salt dispenser if that helps. Last night when running for the first time i had a plumbing issue where the drain pipe was not set high enough as it states it has to be 500 to 100cm of ground height. Also had a leaking sink drain pipe. Fixed all that and turned machine back on and it pumped all the water that was inside to drain. I have cancelled the program and restarted but now it is ru


Unplug it and wait 5 minutes. Plug it back in. This will reset the machine. Put it on full cycle and allow it to do a full cycle. It should work just fine. ... Dishwashers

I have a Frigidaire Gallery Series dishwasher that is 4 years old. Model No. GLD2440RES1. The problem is that there is a high pitched whine and a "rattatt" sound from the pump/motor when the d/w is running. Not hearing this sound when the d/w is draining. Sound seems to be getting louder. What is the issue and how would I fix the problem. Thank you!


Hello. That sound is coming from the dishwasher's motor. This is a costly repair and honestly not worth doing on a four year old dishwasher. If you do choose a repair, you can purchase a motor for your model at this link ... Frigidaire Dishwashers

Kohler sink Building a Peninsula with a sink adjacent to a wall where I have to run the plumbing. The sink center will be 4'6'' from wall and the floor joists run perpendicular to the island. I am putting a 42'' counter behind the sink. I am in NJ and several plumbers say they can vent this. How is it possible to run the vent if you are not above flood rim. not allowed to use studa vent


I don't know the laws in NJ but in MT we would build what is called a loop vent. It is hard to explain but if you googled it I bet you could find some pictures. ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

After starting wash cycle the rotary dial advances to what appears to be the second phase and stops at about 1 oclock position. I replaced the timer/switch, same problem. Could I have a water temp sensing problem due to a poorly adhered sensor? I thought this may be the issue as the sensor at the water feed near the soap dispenser was loose on inspection. Model Bosch SHU4002UC/U06 Under counter Dishwasher


Check the thermostat sensor. If the sensor is faulty the amchine will not detect that the right temperature is reached and the cycle will not advance.The thermostat will read low ohms (about 1K) using a multimeter at Rx1 at ro ... Dishwashers

Frigidaire FDB1050REM2 soap cup doesn't open or opens but doesn't dispense. is it a latch, spring or timer issue?


Hi,\012There are three common problems that cause the Soap Dispenser or Cup not toopen. I have a tip that will explain these problems in detail....Dishwasher Repair Problem ... Frigidaire 24 in. FDB1050REC Stainless Steel Built-in Dishwasher

Frigidaire Dishwasher GLDB957AS1 - Control Board Failing?


... Frigidaire 24 in. GLDB957A - Multiple Color Energy Star® Built-in Dishwasher

Frigidaire Ultra Quiet i Overflowing


... Dishwashers

Frigidaire dishwasher stuck on wash cycle, doesn't complete - model # FDB1050reb0


This model doesn't use a timer like older types, The element is turned on and off by the electronics and a failed board can cause the symptoms mentioned, thee is no real way to test the board as the integrated electronics are quite complicated. The b ... Dishwashers

Frigidaire pld2855rfc1 Dishwasher cycle error


... Frigidaire 24 in. FDB750RCC Stainless Steel Built-in Dishwasher

Frigidaire Professional Series dishwasher not working


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks for using FixYa. To start\015\012with error ‘Er’ means membrane switch failur ... Frigidaire PLD4375RFC Dishwasher

Frigidaire fridge door makes a loud popping sound


You need to take the door off the hinges and remove the lower hinge plate from the bottom of the door. This is where I found my popping problem. The black bushing with the 3 bumps and dips on it is loose in the plate going into the door. I took black ... Electrolux Frigidaire Professional Series 24 in. Built-In Dishwasher Dishwasher

Frigidaire dishwasher doesn't pump water to the top wash bar


... Frigidaire Dishwashers

Frigidaire dishwasher not completing cycle.


Hi,The cycle doesn't completeIf the cycle doesn't complete, check these:Water-heating cycleTimerWater-heating cycleMany dishwashers heat the wash and/or rinse water to a higher temperature, as the cycle ... Dishwashers

Frigidaire dishwasher model FDB1050REQ2 won't start


... Frigidaire Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0473 seconds