Having problems with your Frigidaire 24 in. FDB1250RE Built-in Dishwasher ?

I have a Frigidaire FDB125RHD1 and it has a round white plastic drain in the bottom, I want to take it out to clean it. It moves around, but doesn't seem to unscrew, how do I get it out without breaking it?


Answers :

Hi
\015\012
\015\012Please check the part of hose which is in contact with panel. You'll be able to see a clamp, press the top of the clamp inwards and pull out the clip using a screwdriver. Next, you'll need to remove the two screws at the bottom of the front panel and then push down on the front panel to remove it. Your hose will be in view. Please check the diagram for your refrence.
\015\012
\015\012Frigidaire Dishwasher Diagram
\015\012
\015\012
\015\012Please post back for further assistance.
\015\012
\015\012Daniel
Repair Help & Product Troubleshooting for Frigidaire 24 in. FDB1250RE Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a Frigidaire FDB125RHD1 and it has a round white plastic drain in the bottom, I want to take it out to clean it. It moves around, but doesn't seem to unscrew, how do I get it out without breaking it?


Hi\015\012\015\012Please check the part of hose which is in contact with panel. You'll be able to see a clamp, press the top of the clamp inwards and pull out the clip using a screwdriver. Next, you'll need to remove the two screws at the ... Frigidaire 24 in. FDB1250RE Built-in Dishwasher

I have a maytag mdb4000aww dish washer. The dishes aren't getting consistently clean. I wanted to clean the trap/filter. There's two ports towards the front side. The one on the right i was able to remove and clean. The one on the left moves up and down but i can't seem to be able to remove it (without breaking it). Any advice? Thanks


What must I do if the rinse compartment is plugged???\015\012help please. My moms dishes are piling up. my hands are all pruiny from hand washing!!! ... Dishwashers

I am trying to get the wash module off so I can clean the debris in the sump/chopper& screen.But the last screw(4th one) is under the feed tube cap and I can't get to it.And I can't seem to move the tube either. What's my next move? Thanks in advance, Murph


... Whirlpool 24 in. GU1500XT - Multiple Color Built-in Dishwasher

I have a Maytag dishwasher, Model MDB4100. Are there directions for removing the cleaning equipment in the bottom of the dishwasher? I do have the manual and there are no instructions to do this. I am getting scummy buildup around the drain and suspect it needs a good thorough cleaning that I can't do without taking it apart. I have tried to clean away the "gook" but it reappears after a few washes and I can't reach the back. Thank you, Cara


... Maytag 24 in. MDB4100 Built-in Dishwasher

There are no error codes showing, water is definately getting hot but dishes on bottom tray not cleaning, i have used few products specially designed to clean the dishwasher itself without any dishes in, checked the filter, salt, etc, used tablets, gels ... nothing seems to work. Dishes just not clean !


Lower washer not working but upper washer is. This is due to the dishwasher thinking it is on half load. the sensor is faulty and you need to replace the whole unit (water circulation pump). However if like me and your not bothered about having a hal ... Baumatic 23 in. BDW13 Built-in Dishwasher

Top arm does not seem to be going around when diswasher is running. Top shelf articles are not getting clean. Black scummy material gets stuck in the top arm jet.


HI-\015\012If you can remove the spray arm, usually they screw or pull off, then put it under the faucet and start picking out all the stuff out of the jets. The best tool i've found for this is a large safety pin, bend a little hook on the end of i ... GE Dishwashers

Our Kenmore dishwasher 665.1726 doesnt seem to be cleaning as well. LAst time this happened a serviceperson cleaned out a filter where food debris had clogged the water flow. We were able to take off the bottom wash arm but couldn't figure out how to get the filter off (there are 4 screws holding it in place and one is under the plastic arm that caries water to the sprayer.


I had the same problem!\015\012\015\012The arm WILL come off....you have to pull the screen off. ... Kenmore 24 in. 15689 Built-in Dishwasher

I have a kitchen aid dishwasher that is stuck on the clean cycle. It will drain water, but no water seems to be getting into the washer. If i push the start button, cycle will not start. The clean light is the only light that will stay on. the other lights will go on, but they eventually go off without starting the cycle. Is this the thermal fuse???


... KitchenAid Dishwashers

My viking dishwasher is not getting the dishes clean in certain areas of the dishwasher - they come out with food still on and/or greasy residue still left on. There is a white residue on alot of the glasses. Seems like it might be calcification - any way to clean the dishwasher to break down any calcification? might also be that water is not heating - how to best determine that? email is [email protected] and phone is 540-316-1263


Hi,The scum, film and white residueproblems have started since the reductionof phosphates in dishwasher detergents.Here is a tip that will help you to solve the problem of films, residue, and scum in your dish ... Viking VDB450 Dishwasher

We're having same problem with our whirlpool GOld quiet partner III. We moved into our house three years ago and no manueal was left. I am sure its a filter or plug but I can't seem to figure out how to get to the filter or plug. I can take off the arm but then nothing. Is there a manuel I can get or can someone explain exactly where the parts are that I need to check? Dishes have grit on them, white spots, just not clean at all. Thanks!


The problem is hard water. There is a new product out called the dishwasher filtration system. It filters the water before it enters your dishwasher. It works amazing and has a money back guarantee. You will love the ... Whirlpool GU2400XTP Built-in Dishwasher

On an AEG Favorit 64570 VI we have an error 20. Manual indicates a drainage problem, however when we pour in water, it gets pumped out without a problem. No obstructing in the exhaust tube. Next we checked the pressure sensor, by taking it out and blowing into it. It clicked as pressure was applied to it, so the inner switch worked. Everything is clean, but still we get an error 20. What does seem strange is that the appliance does not take in water. Any suggestions are welcome.


... AEG 23 in. Favorit 86070Vi Built-In Dishwasher

The dishes in my dishwasher are not getting clean, particularly on the upper rack. It seems to be because the upper water arms are not spinning during the wash cycle. The bottom spin arm is working fine. I have cleaned out both upper arms as best as I could without removing them (above and attached below to the upper rack), as it does not appear that these arms are easily detachable. I am thinking maybe water is not making it up the line to the upper arms? I also have a lot of dirt in the b


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks for using FixYa. First of all please check the\015\012Water temperature by using a thermometer inside the dishwasher to measure ... GE Dishwashers

Top "spinner" has some water flow but doesnt spin. Doesnt seem to be enough pressure to get it moving, would the pump be on the way out , i have checked all holes for blockage and also ran some cleaner through machine.


Hi,That problem can have many and varied solutions...I have tried to put together in this tip the most common and easiest to checkout problems. For many of the spray arm problems the ... Asko D1776 Stainless Steel Built-in Dishwasher

I have a ge dishwasher and it seems as if the top rack is getting clean and part of the bottom but the back left and front right of the bottom is not cleaning. Something must not be moving for the bottom? Please help! I just got this and was so happy to have a dishwasher and now it is useless :(


Hi, \012I have an older dishwasher also and recently mywife also complained about it not cleaning right... so me being the man I amtried in vain to clean the things... Bought new spray arms online and installedthem in minutes...now the thing works li ... Tappan 18 in. MDR251RE Built-in Dishwasher

FDW60 dishwasher - taken apart pump and that is clear. Seems that dishwasher fills, and empties and heats all OK but water wont go around the machine ie the motor pump doesnt start - any idea how to take this out and replace without having engineer around? Taken small pump apart and its clear. First of all the Eco and fast light flashed, then we took it apart with some direction from online discussion advice. Now Eco and Pre wash lights are flashing. Machine empties water, then fills with


... Hotpoint 24 in. FDW60 Free-standing Dishwasher

I have a GE dishwasher and it seems as if the top rack is getting clean and part of the bottom but the back left and front right of the bottom is not cleaning. Something must not be moving for the bottom? Please help! I just got this and was so happy to have a dishwasher and now it is useless :(


Hi, \012 \012I have an older dishwasher also and recently my wife also complained about it not cleaning right... so me being the man I am tried in vain to clean the things... Bought new spray arms onli ... Tappan 18 in. MDR251RE Built-in Dishwasher

The water is not getting spun around inside my Maytag, everything else seems to be working, but the dished are not getting totally clean.


Ck screens may be chopper propeller kit ... Maytag Dishwashers

Dishwasher is 2 years old. Top shelf dishes not getting clean even on on heavy duty and sani rinse cycle. All arms move freely,tried the 2 cups white vinegar in an open container and run cycle. I thought that helped but a few days later we are back to the same thing. No debris around drains. Tried loading differently. I have called for a repair person,but is there anything else I could check on my own?


Sometimes the holes in the arms get blocked up,sweetcorn,rice etc, this then stops the arm spinning and water being sprayed onto plates etc, unscrew it and run water through the centre hole and see what happens. ... KitchenAid Dishwashers

Both spray arms of my DU943PWKQ0 do not turn or spray. The motor is moving and the it drains without problem. During the wash and rinse cycle I can hear the sound of water, however it doesn't clean at all and the sprays arms stay where they were. It seems the motor only creates no spray, but wave. I powered cycled the dishwasher, the problem remains the same. Anyone know what's wrong with it? Thanks James


Try rotating the spray arms by hand. It should rotate freely. If possible clean the arm rotating place by removing them.Arms rotate by by pump pressure only. finally check the water pump also. ... Whirlpool DU943PWK - Multiple Color Built-in Dishwasher

WATER IS COMING IN TO THE TUB WITH LOW PRESURE. SEAMS THAT THE BOTTOM ARMS IS HARDLY MOVING. SEEMS NONE FOR THE TOP ARMS. SAOP IS NOT DISOLVING. DISHES ARENT GET CLEAN. it is draing ok


... Maytag 24 in. MDB8750A Jetclean II Built-in Dishwasher

Top arm of dishwasher does not spin or spray. it is a 7 yr old frigidaire dishwasher, model #gldb957ab. The dishes on the lower rack also do not get clean. this just started recently. the mid level sprayer will turn by hand but doesn't move during cycles. seems like it would be there is no water coming to the top of dishwasher while it is running.


... Frigidaire 24 in. GLDB957A - Multiple Color Energy Star® Built-in Dishwasher

My Miele Platnum dishwasher is not working. It is flashing "intake/drain" When it begins instead of the normal hearing of water moving around you just hear a humming. My husband and father took out all the filters/baskets etc and made sure everything was cleaned out. They checked the hoses. After that it seemed like it was going to work because it started to cycle normally but now it is flashing again and this time there was water standing in the bottom of the dishwasher. Any thoughts?


Most common faults with dishwashers is a drain fault. Check for any kinked hoses and check the drain spigot under the sink where the drain hose connects into the u bend. Usually this is where food gets trapped due to the spigot not being drille ... Miele 23 in. Novotronic G841 Built-In Dishwasher

Dishwasher Problem... Hey, I'm sorry I can't seem to find this information anywhere else. I'm having a similar problem with my dishwasher (also a kenmore quiet guard) and I wanted to try to clean the filter. I'm not sure how to remove the lower arm of the dishwasher. There is a kind of plastic-screw in the middle of the lower arm, is that what holds it on? I'm afraid to try twisting it because I don't want to break it. How did you get it off of yours? I hope I'm not bothering you! Thank you, Je


You are right. The plastic screw needs to be removed. I have a Quiet Guard 4. My procedure is as follows:\015\0121. Remove baskets. Need to pop off the 'keepers' at the ends of the top slidding shelf supports.\015\0122. Remove bott ... Dishwashers

I have a Whirlpool DUL300XTLQ3 Queit Partner III. The cleaning blades stopped moving-started it-waited awhile-opened it-the blades were in the same position. Took the bottom blade+filter cover off. Then I held down the metal piece on the case and switched on the micro switch on the door to see it running with the door open. The water shot straight up about 4-5" that's it. This does not seem to be enough pressure for the water to get all the way up to the top spinner. Am I looking at a new pump


If there is not enough water, the dishes would not get cleaned. Thiscould be caused by a partially closed water shut-off valve (locatedunder the sink), or a faulty dishwasher water valve (located at thebottom of the dishwasher, behind the kick panel, ... Whirlpool Dishwashers

New dishwasher the soap dispenser door doesn't open when the washer is on any cycle. Therefore, dishes are not getting cleaned. Help. I have tried moving the button back and forth to break anything free that could be making it stick. Still doesn't work.


Having same problem + won't dry. Looks like this is a crap dishwaher. ... Frigidaire 24 in. FDB1050REC Stainless Steel Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1310 seconds