Having problems with your Frigidaire 24 in. FDB126RB Built-in Dishwasher ?

Frigidaire Dishwasher How do I remove the blue protective material from the front of my new dishwasher?


Answers :

It should just peal off from the edge like a piece of tape.
Repair Help & Product Troubleshooting for Frigidaire 24 in. FDB126RB Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Frigidaire Dishwasher How do I remove the blue protective material from the front of my new dishwasher?


It should just peal off from the edge like a piece of tape. ... Frigidaire 24 in. FDB126RB Built-in Dishwasher

My new tappan dishwasher came with a blue front door. Is this blue material a protective layer to protect the door finish? If so, how do I remove it to show the real door finish?


Itsa protective cover. peal it off ... Tappan MDB531RF Dishwasher

I have a new tall tub GE dishwasher Model # GLD6964RSS. I removed a blue plastic strip located on the top rack because I thought it was packing material. Now I can't get to back on and oviously it was meant to hold the prongs upright. Can you tell me how to get it back on? Peggy Savell 3390 Black Ave. Simi Valley CA 93063 805/527-2120


Hello Peggy. I searched high and low for a diagram to send to you without success. This is what I recommend. Go back to the store where you purchased this dishwasher, armed with your digital camera or cell phone camera. Find your dishwasher on di ... GE Dishwashers

Unable to fit new door panel to front of dishwasher. Have removed old one with great difficulty and now cannot figure out how to get new one on. Have placed the fittings from old door onto new one in exactly the same place but am baffled as to how it attaches. HELP!


Im not sure what new panel you are trying. But if you can still get the old one back on, you can get different panels, color, and designs from applianceart.com. they also custom cut stainless panels to fit or they have a stainless foil that can cov ... Whirlpool GU2400XTP Built-in Dishwasher

Hello! I just ordered a new facia panel for our Bosch dishwasher SHU9955UC/U12. It seems like it should be fairly easy to replace it (meaning, myself...). Is it really just a question of unscrewing the screws on the inside of the door, removing the old panel and then replacing the new one? Are there any especially delicate inside mechanisms/parts That should be protected? Many thanks.


... Bosch SHU9955UC Built-in Dishwasher

My zanussi fitted dishwasher is leaking water through the door. removed front panel to see what is going on and the water is spurting out of two gaps in the seal. the seal is brand new and manufactured with these gaps. is there too much water in the dishwasher - does it have float valve that could be at fault?


It has a pressure stut,that should tell it to stop filling the machine,it sounds like it has gone ... Zanussi 24 in. ZDT6041 Built-in Dishwasher

Drain pump i bought a new frigidaire dishwasher and setting it up... i removed the drain hose from the drain pump and noticed the pump outlet has a thin rubber diaphram...should i remove it....set up instructions say nothing about it...ty....tim


My husband did remove ours,and we too have a frigidaire 18" built in dishwasher. But ours won't drain, he says it might\015\012be the pump, but he is hoping not.. everything works except when its draining. water just sits there in the bottom.. ... Frigidaire 24 in. FDB510LC Free-standing Dishwasher

Brand new dishwasher Frigidaire FBD 1250 leaking at bottom of front door


... Dishwashers

Our new home has a GE dishwasher. If I look at the steam vent on the front of the machine, I can see a piece of styrfoam. Is that supposed to be there or did they forget to remove it when they installed it?


... GE 24 in. Profile PDW7300G Built-in Dishwasher

I am trying to replace the GUIDE RAIL BRACKET ASM on my GE dishwasher (model no. GSM1800JWW). How do I either: (a) remove the old brackets, and then install the new ones; or (b) remove the rollers from my new brackets, so that I could slip these rollers onto the old brackets still in the dishwasher, saving the trouble of removing the old brackets in the first place? Either solution would be acceptable, but right now I can't figure out how to do either one without breaking something. Thank you v


Be ready for both . because if they break you can still replace it. but (a) is to me the better choice. let me know how you made out and send me a 4 thumbs post if it works out ... Dishwashers

Front panel My dishwasher wouldn't drain. I read I had to remove the front panel under the door and get to the hose to look for a blockage. I screwed out two screws on the side of the dishwasher and removed the white front panel just under the door. But then there is another metal panel and I can't loosen it. Is it just stuck or is there soem way of doing this? Elmi


Did you knock out the plug on the disposal before you hooked up the drain hose ? ... Bosch 24 in. SHE44C02UC / SHE44C06UC / SHE44C07UC Built-in Dishwasher

My dishwasher will not start. It is a frigidaire / electrolux FDB1050REQ. I have checked thepower....and reset the circuit breaker.......then pushed the start button.....the light comes on on the front of the washer like normal but no water starts filling. I have jiggled the anti water overfill device but still nothing. HELP!!! The front of the dishwasher says Frigidaire, however, the inside of the door where the model# is says Electrolux


... Frigidaire Dishwashers

Dishwasher Leak I found water on the floor in front of my dishwasher one morning so I removed the panel and ran the dishwasher to check for leaks and found none. I did check all the gaskets on the inside and they appeared okay. I again ran the dishwasher and had no leaks at that time, however, the last two mornings after I have found water in front of the dishwasher.


Hi,Here is a tip that I wrote about leaking dishwashers...There also is a link in there to another tip on how to buy parts online fo ... Frigidaire 24 in. PLD2850 Built-in Dishwasher

Hello I have a built in DCS dishwasher - width 24" heigh 35". It started smoking out the front and the repair man said it needs a new control board. Is that possible or should I buy a new one. IT is not a dishdrawer its a full dishwasher. the top rack is also broken. If I need to buy a new one - where from - new jersey area


Http://www.thefind.com/appliances/browse-dcs-single-dishwasheryou can purchase online from here... ... Dishwashers

I got this bosch sgs43C12 dishwasher and have the problem that it doesn't fit in our new kitchen(it's to high). i know it is meant as a free-standing dishwasher but is there a possibility to remove the top to get it into the new kitchen? or won't the dishwasher function without the top? many thanks for any help martin


THE LOWER LEGS CAN BE ADJUSTED ON THE LEFT ,RIGHT AND MIDDLE ... Bosch 24 in. SGS43C12 Classixx Free-Standing Dishwasher

Hello, My GE dishwasher stopped draining. Model Number: VSD2304JOOWW I emptied out the dishwasher of the liquid, removed the cover and checked the filter. (Didn't look bad.) Checked the drain pipe under the sink and there was a little debris (slime) but very minimal. The garbage disposal was installed at the same time as the dishwasher 3 years ago (brand new place). What else could it be? Any advice would be helpful as my new home seems to be falling apart and it is getting pretty e


Drain pump either disconnected or jambed ... GE Profile PDW8400J Built-in Dishwasher

Ariston LS620A When running my dishwasher the dishwasher tablet is not disolving and entering the system. The dispenser is open but the tablet is stuck there??? I have cleaned the removable parts from the bottom of the system and put a new tablet in but the same problem happens again. This time when removing and cleaning the parts at the bottom there is water present and it hasn't drained is that normal? Or are there other parts there I have to remove....I have tried but nothing seems to budg


Hey, I experienced the same problem and I realized it happens when you block the water from the dispenser with a dish. Make sure that it is never blocked and the dishwasher is going to work fine ... Ariston Technologies LL64WNA Built-in Dishwasher

My new Dishwasher Won't Drain, ehat to do? I have a GE model GSD2300N00WW dishwasher. A few days ago we noticed that it isn't draining. This dishwasher came installed in our new doublewide mobile home. There is no disposal, the drain hose isn't clogged, there is no air-gap installed, and the sink drains just fine. I have removed the filter and cleaned it (wasn't really dirty). Does anyone have any ideas?


... Dishwashers

I have a newer model GE dishwasher. About a couple of weeks ago we lost power to home. When power was returned the dishwasher was making a high pitch sound and power was not returned to the front display. I had to remove a black/white wire from front of the display to make the high pitch sound go away. Do you have any solutions to make the high pitch so go away and for power to be restored to the front display? Thank you.


Hello\015\012\015\012High pitch sound comes when the main control also known as the electronic board goes bad and needs replacement. Please try to blow air with hair dryer on the display just to check if that'll solve the problem. Hope yo ... GE 24 in. GLD5560LSS Stainless Steel Built-in Dishwasher

I have a zanussi ZSF2440 dishwasher, when it turned on by the power button on the front you can choose a cycle and start it, Once the cycle is started it fills up with water but doesn't stop until it over flows setting off the flood protection, which cuts the power, so all the lights on the display go off and stops the water flow and drains the dishwasher and keeps draining the dish washer while the flood protection is on. It seems as if the dishwasher doesn't know when its reached its correct


... Zanussi Dishwashers

My bosch dishwasher new pump has a extra wire pos thermal protection which original pump has not do i just leave after tapeing it or do i need to wire it in somehowm


... Bosch Dishwashers

Frigidaire Dishwasher Hi, I have installed a new model GLD2250RDC0 Frigidaire dishwasher and it will not start. Power and water supply is connected. When I push the cycle button for Normal the light comes on but when I push Start nothing happens except the "hi-temp wash" and "no heat dry" lights flash. I assume this is some kind of troubleshooting code but the manual does not cover this and I am in Honduras so service is non existent. Any ideas? By the way, I was a builder in the States for 25 y


... Frigidaire 24 in. GLD2162RDC Stainless Steel Built-in Dishwasher

I have a GE Dishwasher model #GSD4134Z02WW. I am trying to remove the lower spray arm. Mine is cracked. There are no screws or bolts holding the arm in the dishwasher that I can see. The new piece appears to have threads on it as to indicate that you would just screw it in place. The old piece doesn't screw/turn. How do I remove this piece?


Whack it with a block of wood and a hammer ... Dishwashers

The Bosch plastic push button (AP2804452) has broken on my SHU9950 dishwasher. The switch itself is still good. I have removed the broken pieces of the bad button from the unit and am now depressing the switch without the button. When I get the new push button, what is the proper way to remove the control panel cover to put the new button in place? Thanks!


... Dishwashers

How does one change the colour panels on the front of the dishwasher. Need to change panels to white with new appliances. I was informed many years ago when we purchased dishwasher that panels could be reversed to new colour.


On any dishwasher, the bottom rail can be pulled off and the panel bends and pulls right off. ... KitchenAid 24 in. KUDP01IL - Multiple Color Built-In Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2329 seconds