Having problems with your Frigidaire 24 in. FDB510LC Free-standing Dishwasher ?

How to change a 30 amp breaker in this outdoor service box to a mobile home?


Answers :

Repair Help & Product Troubleshooting for Frigidaire 24 in. FDB510LC Free-standing Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

How to change a 30 amp breaker in this outdoor service box to a mobile home?


... Frigidaire 24 in. FDB510LC Free-standing Dishwasher

Just had a Bosch dishwasher installed in my new kitchen. The plumber who installed it ran it and it worked. Now we cannot get it to run. We have tried everything. Restarted several times, turned the circuit breaker off and on, changed the cycle and nothing works. The light comes on but it does not get water or run. What are we doing wrong. The dishwasher is brand new out of box but we bought it 4 years ago and remodeling was delayed. Model #SHU5314UC/U06 FD#8001


Test the door switch. It can be faulty or misaligned. You can also check the back of the unit and/or remove the rear panel and take a look at the thermal fuse. It may be bad not allowing enough current flow to operate the machine. ... Bosch SHU5316UC Dishwasher

Just had a Bosch dishwasher installed in my new kitchen. The plumber who installed it ran it and it worked. Now we cannot get it to run. We have tried everything. Restarted several times, turned the circuit breaker off and on, changed the cycle and nothing works. The light comes on but it does not get water or run. What are we doing wrong. The dishwasher is brand new out of box but we bought it 4 years ago and remodeling was delayed.


Do you have the manual?What is the exact model #?Thanks~! ... Dishwashers

The breaker keeps shutting off when I run my dishwasher. Service already changed the intake hose. Is it the motor?


Rarely. next time this happens. immediatly go to the breaker box, and feel for heat on the breaker that is blown. if it is warm, your miele is okay, call an electrician. ... Miele 23 in. Novotronic G841 Built-In Dishwasher

Start button flashes 2hr, but will not start the dishwasher, when touched. Also, lights on top of the door are not always functioning. I phoned Maytag and customer service had me turn off the circuit breaker for 5 minutes. This did not change the dishwasher. I think that the door latch is not snapping into position, when I open the door.


... Maytag 24 in. MDB7601A Free-Standing Dishwasher

Bosch SHX46A02UC dishwasher hardwired, circuit breaker ok, know there is power to junction box. No lights, no activity, cancel and drain switches not functioning, disconnected for a few minutes and reconnected. No change. Leaning towards control module, i will visually inspect and spray circuit cleaner on switches. Any other suggestions gratefully accepted. THANKS


... Bosch 24 in. SHX46A02 / SHX46A06 Built-in Dishwasher

If I turn the power off via the breaker box, do I still need to unplug it? The breaker box off, did not help the situation. Thank you


Yes; that's right, if you disconnect \015\012from the board braker energy, there is no need to unplug power cord from\015\012 the Kenmore, either one or the other way, what is done here is to \015\012prevent the entry of energy. ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

Bosch APEXX model number SHY99A05UC/14 lost power. Power input line appears to have arced (white power line and wire nut show signs of stress). The power breaker did not throw at the junction box. Already cut back wire and re-attached new wire nut along with replacing the breaker at the junction box. Still no power. There are no other visible signs of power stress or water damage underneath the unit or inside the doo panel.


I do not have access to the user or service manual for this model.\015\012However, such symptoms could be result of heater element or thermal overload fuse blowing. Do you remember having a very hot dishwasher when the it lost power.\015 ... Bosch Dishwashers

We have a service contract with Broward Factory Service. My GE dishwaher went out with eater in it, no power. Checked the panel box flipped switch, nothing. The service tech. said the rinse aid cup leaked and ate thru the wiring, and he had read a recall about this. I am checking to see if Model #GSD3610Z00AA, Serial #ZS782757B is on the recall list.


I was trying to find out if the dishwasher was on a recall list, and I did by calling GE direct. It was not, so the service I have is replacing the rinse aid box.\015\012Thank you, ... GE Dishwashers

Service bulletin Samsung model dmt800rhs requires circuit breaker reset in order to work. I understand there is a service bulletin for that problem. Where can I get a copy of that bulletin?


... Samsung 24 Dishwasher DMT800RHS

Breaker size what size breaker do i use for 50 amps


Use a 75 amp breaker. ... Hobart 24 in. LXIH-3 Built-in Dishwasher

I had a 125 Cutler Breaker box put in a few years ago but I never realized that they never mark which braker was for what.I want to install a dishwasher but can not identify the breaker. Do I need to call in an electrian?


Generally you get someone to stand and watch the lights in a room while you go through and turn each breaker on and off until you find the one you're looking for. Nothing at all wrong with going through and marking them too.It's also good ... Dishwashers

Unit went dead. There is no power (electric) to it. I checked the circuit breaker and even changed the breaker, but no power. Removed the bottom foot panel and did not see any reset button. I don't know what else to look for.


The electronic control board has failed & needs to be replaced,by someone who knows what there doing.GOOD LUCKECO KIZZA ... Electrolux Frigidaire Professional Series 24 in. Built-In Dishwasher Dishwasher

Describe your whirlpool du948pwpq Problem: I have a whirlpool du948pwpq dishwasher in a tenant's unit. They said the delay start button is no longer working. Also, they cannot "de-select" the heated dry option. It seems to be an issue with the electronics of the control panel. I've already tried to "unlock" the buttons - no change. I also powered off the unit in hopes of re-setting - no change. Does anyone have any other suggestions? I am hesitant to call a service person (it's out of warrant


... Whirlpool 24 in. DU948PWPQ Built-in Dishwasher

Nothing lights up. seems like no electricity. checked breaker in breaker box, not tripped.


Hi.If possible use an extension to test the appliance on a different main socket , or test the socket using a different device. In any case check power cord connection.If main is OK replace the ... KitchenAid 24 in. KUDK02CRBS Stainless Steel Built-in Dishwasher

Hi I have a bosch diswahser smu 7000. No power when I push button. Manual says its could either be fuse or circuit breaker. Checked breaker its ok. My manual does not say anything about location fuse. Called bosch. And they said they cant tell me. I nee to have a service call. Any help. Thanks.


... Dishwashers

Doesn't appear that the washer is running through its cycle. The soap packet isn't desolving and no water is on the plates. There was an incident when the washer tripped the circuit breaker, reset breaker and now it doesn't work. Is there anything I can do, or do I need to call service?


I think something went wrong with your motor or the inlet Solenoid valve. That was the reason for the trip.Take service center help!Hope you are getting power after resetting the trip. ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

I have a model DU840SWLQ0 dishwasher,everytime we turn it on it trips the breaker in the breaker box,prior to thi problem the drain was stopped up,cleaned the drain now this problem


... Whirlpool Dishwashers

I have a Husky 2600 PSI power washer with the Honda GCV160 engine that I can't get to start. It was okay when I purchased it from Home Depot last spring but now I've tried putting new gas in it, spraying carb cleaner, new spark plug, and it still won't start. I only ran it for about 30 minutes when I first purchased it. The guy at the service desk at Home Depot told me that the water hose should be attached and turned on while trying to start. Is this true or would this be starting the motor und


You can eliminate the motor by unbolting the pump from it and then if it will start the problem is with the pump or the unloading valve.If it does not start with the pump removed then you check for spark and get the carb cleaned or have a kit put in ... Karcher 2500 PSI Pressure Washer

My dishwasher ran this morning with no problems. This evening it won't work at all. No lights come on at all, as if there is no power. I checked the circuit breaker box and all is well there. I flipped the breaker just to double check, but nothing. Sadly, I cannot find my instruction manual. Do you have any ideas?


The manual is no problem you can download it from this site.\015\012The problem you are experiencing will not be described in ... Samsung 24 in. DB5710DT Stainless Steel Built-in Dishwasher

Our kitchen aid dishwasher mod KUDE03FT is not draining. We have checked to breaker box and no breaker is tripped but it is as if the front panel is dead even the drain button will not respond


... KitchenAid Dishwashers

Need a Service Manual to Change Pump & Impelleor ???


Http://www.serviceforce.co.uk/pdfs/U22387.pdf\015\012\015\012regards\015\012\015\012Paul ... Zanussi 23 in. ZDT6252 Built-in Dishwasher

Maytag quiet series 300 problem model MDBH955AWB Set washer to run on Delay last night. All lights were go. Has worked in the past. It didn't run and now, no lights, and doesn't operate. No problem with electric box breaker switch


Same problem...seems this appliance is a piece of ****....i have read nothing but bad things about it....i have the choice to pay 250 to repair it...or replace it....easy choice.... ... Dishwashers

Bosch exxcel Last night when i turned on my dishwasher it tripped the fuses in the house. I have changed the fuse in the plug, but it continues to do it. The lights on the display flash up once and then the fuse box trips again. Not sure what else to check. Can any one give any suggestions?


The likely cause of this is a failed heater element which would cause the fuse to blow. You will need to get the heater element checked out and replaced if necessary. A visual inspection of the element may reveal the problem jf not an electrical test ... Bosch 24 in. SGS47E02 Exxcel Free-standing Dishwasher

MY BOSCH DISHWASHER MODEL #SHU43C06UC/17 WILL NOT START. NONE OF THE LIGHTS TURN ON AS IF THERE IS NO POWER GETTING TO IT. I HAVE CHECKED THE POWER CORD AND THE BREAKER BOX AND EVERYTHING IS O.K., BUT I STILL CAN NOT GET IT TO TURN ON. AT ONE TIME THE LED LIGHT LIT UP FOR A BRIEF SECOND, BUT NEVER AGAIN. ANY OTHER SUGGESTION?


Hi-Check if there is a fuse at the back of the unit or inside of it. Replace if there is any.Keep us updated, thanksHope this helps ... Bosch Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0790 seconds