Having problems with your Frigidaire 24 in. FDB635RF Built-in Dishwasher ?

Dishwasher will fill but the jets will not engage at all

\015 We have a high calcium content water supply so i started to use CLR to break it up a bit my concern is a couple of hard chunks broke away under the trap and got into the intake and is blocking the flow. If there is any other ideas on what it may be.\015

Answers :

The intake can be easily cleaned out by removing the hose where it comes into the pump. The calcium buildup inside the unit can be taken care of by adding white vinegar to the first cycle. It melts the calcium & lime deposits away, and if it doesn't get totally rinsed off, it won't hurt you like CLR will.
The problem is hard water. There is a new product out called the dishwasher filtration system. It filters the water before it enters your dishwasher. It works amazing and has a money back guarantee. You will love the way your dishes look after the first load. It is also very affordable (like 70 bucks). Go to www.dishwasherfilter.com to find out more info. this will also solve any future build up.
Repair Help & Product Troubleshooting for Frigidaire 24 in. FDB635RF Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dishwasher will fill but the jets will not engage at all


The intake can be easily cleaned out by removing the hose where it comes into the pump. The calcium buildup inside the unit can be taken care of by adding white vinegar to the first cycle. It melts the calcium & lime deposits away, and if it do ... Frigidaire 24 in. FDB635RF Built-in Dishwasher

Hotpoint Dishwasher Model HDA3400G02WW...dishwasher will not fill. Also the elecertic magnet will not engage. The sounds of the dishwasher are the same except the loud sound of the electric magnet engaging.


... GE Dishwashers

Miele 868 dishwasher-water fills at begin of cycle,but pump/wash cycle doesn't engage(timer dial still advances,drains at end of cycle.dishwasher was workong,but was moved to a new location ans hasn't worked since.impeller moves freely and pump was rotated via 8mm hex key.is there possibly a reboot/reset, or is there possibly a water pressure issue?-I didn't think so as the dishwasher fills to the prescribed level.


... Miele Dishwashers

My dishwasher is leaving a film on all the dishes some of the times. Other times the appliance works fine but more and more often it is leaving a white film on all the dishes as though the rinse cycle is not working well. I have tried filling the jet dry compartment and have been using the same jet dry and detergent as always. The dishwasher is about ten years old and has been working well up to a few weeks ago. Ideas?


Check inlet water quality & whether softening salt is required. Check and fill rinse aid. refer user manual. ... Maytag 24 in. MDB3700 Built-in Dishwasher

We have a GE GSD4000J00WW dishwasher, 2 yrs old. Suddenly seems to fill with water, but no motor engages when you start the cycle. When you turn the knob, it makes a clunking sound, but all that happens is water fills. Also, how do I get the water out of the bottom of the dishwasher now? Thanks!


... GE Dishwashers

Bosch dishwasher Model SHU43C02UC/17 consistently leaves film on glassware, leaves residue in the bottom of glasses in the back position of the top rack, and sometimes leaves gritty residue on dishes throughout the dishwasher. The stainless steel interior is also stained. I regularly clean the filter, use Jet Dry (the product that was included with the machine when I purchased it), and rinse the dishes before filling. The dishwasher has never cleaned dishes like the 17-year-old Kitchen


Although I previously posted with the same problem of a film on the dishes after cleaning, I did find a section in the owner's manual which solved my problem. Lift up the rinse aid cap on the inside door - the factory setting is on "4". The rinse a ... Bosch 24 in. SHU43 Built-in Dishwasher

The inside of the dishwasher used to sparkle & clean the dishes very good, now the dishes look dirty & inside looks dull with a white film. I have tried cleaning filters & taking arms offs to check for blockage, making sure the Jet Dry dispenser is properly filled, the hose going to the dishwasher does not appear to be kinked, how would I check inside the dishwasher to see if it's kinked there? Do you have any other suggestions? please help!!!!


Hi, \012I have an older dishwasher also and recently mywife also complained about it not cleaning right... so me being the man I amtried in vain to clean the things... Bought new spray arms online and installedthem in minutes...now the thing works li ... Bosch 23 in. SHU33A Built-In Dishwasher

I over filled my Whirlpool dishwasher with jet dry and it leaks every time the door is closed whether it 's running or not , What can I do to stop this


... Whirlpool Dishwashers

MAYTAG DISHWASHER MODEL NUMBER MDBTT59AWW...BASIN FILLS, WATER JETS IN SPRAY ARM START TO EJECT WATER AND SPIN THE ARM, BUT PETERS OUT AFTER 5 SECONDS AND DORES NOTHING...MOTOER HUMMS AWY,..DRAINS FIN


... Maytag Dishwasher Motor Capacitor - 99002665

Does not clean properly..leaves spots on glass and knifes are aways looking dirty..I use only the large dispenser with cascade powder and I fill the rinse dispenser with jet-dry..plus I always turn the faucet on hot before starting the dishwasher. NOT HAPPY WITH THIS DISHWASHER>>JUST OVER A YEAR OLD OF COURSE...I have been complaining about it for over a year to the place that sold it to me...RODGER APP, Flemington, NJ


Hi,Check your heating element.. \012A bad heating element causes many problems in dishwashers…Dishwasher Problems The Heating Element not Working ... Electrolux Dishwashers

I just installed a new Whirlpool dishwasher (model DU1301XTV) and have run three loads. Each time, the glasses, silverware, and plastic, come out with white, chalky residue. There are also water spots. I have tried it with both Cascade detergent, and with a Quantum Finish tablet. I have also filled the reservoir with Jet Dry. Do I have a defective dishwasher? Do I have a clogged line?


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks for using FixYa. First of all please check the water\015\012temperature by using a thermometer inside the dishwasher to measure ... Dishwashers

My dishwasher is not cleaning dishes... The cycles work but the dishes do not get clean an sometimes are more dirty if that is possible. I have tried adding jet dry and extra cleaning liquid but get no results. Also there are times that the bottom of the washer fills with water unexpectedly and will even leak on to the floor. It doesn't leak when the dishwasher is running... I just don't know what to do other than clean out the spray arms. Please help.


Best off to call a certified repair company such as Sears. ... Kenmore 15899 Built-in Dishwasher

My dishwasher is not cleaning dishes... The cycles work but the dishes do not get clean an sometimes are more dirty if that is possible. I have tried adding jet dry and extra cleaning liquid but get no results. also there are times that the bottom of the washer fills with water unexpectedly and will even leak on to the floor. It doesn't leak when the dishwasher is running... I just don't know what to do other than clean out the spray arms. Please help.


Hi,Check your heating element.. Dishwasher ... Kenmore 15899 Built-in Dishwasher

KENMORE MODEL # 363.16222100 Hello - my dishwasher (model# above) is currently filled with H20 and will not drain/work. When the knob to select the dishwasher cycle to begin is turned, it just 'clicks' and does not engage the washing cycle. When I tried to just let it run the cycle as is to 'restart', it had an electrical odor to it., Currently the knob is at the 'Rinse & Hold-(Heated Dry Off)' part of the cycle and all dishes have been removed. I would appreciate any assistance available. Thank


Either the motor is locked up or the control failed. You will need a service visit. If it is over 10 years old, I would buy new. ... Dishwashers

My boys are helping now but they don't rinse off plates first. Now the dishwasher is acting like it's not cleaning very well. I'll take the dishes that have stuff on them still and soak them and then put them back into the dishwasher. Are we filling it to full, I make sure the uper rack is clear on the bottome of it for the water jets to work. I was thinking about running some vinager through it. would that help with maybe some cloged areas


Hi, \012I have an older dishwasher also and recently mywife also complained about it not cleaning right... so me being the man I amtried in vain to clean the things... Bought new spray arms online and installedthem in minutes...now the thing works li ... Frigidaire 24 in. FDB510LC Free-standing Dishwasher

Whirl pool dishwasher jet dry does not fill when I pour in liquid


... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

Kenmore dishwasher white film all over dishes. jet dry was empty. since filled up and several washings later - still film over everything


HiTell me ur model no and brand name pls so that we can help u clearlythank you ... Kenmore 24 in. 15932 Built-in Dishwasher

I have a whirlpool gold quiet partner iv model gu2700xtss1 that was working fine until yesterday. When I start any cycle the dishwasher fills with water but the status bar just keeps spinning and will not go to a timer and the motor won't engage. Any ideas?


Hi,\015\012That would mean that the brain has gone wacky....there is a box in the top of the door that runs the whole show there.. if that goes nothing happens...\015\012You can find a replacement very easily...\015\012\015\01 ... Whirlpool GU2700XTSS / GU2700XTSY Built-in Dishwasher

My GE Dishwasher GSD2030 fills with water, but won't drain. If I slowly move the cycle dial, it makes humming and clicking sounds as if it's trying to engage and start doing something, but it doesn't. Any thoughts?


The problem is more than likely something is stuck in the prop. that helps to grind up foods so they can pass thru the pump. Remove your dish racks, take a small screw driver and gently pry the lock out that the sprayer sits in and pull the sprayer u ... GE 24 in. Profile PDW7800 Built-in Dishwasher

When I hit the start button on my dishwasher nothing happens. It still "finishes" the cycle but nothing ever cuts on. It doesnt fill with water and the sump pump never engages to drain the water that's not there. Any ideas? I know the inlet water pump works, I've detached it and connected it with a pigtail to an outlet.


Replace the main control board ... Frigidaire 24 in. FDB1050REC Stainless Steel Built-in Dishwasher

I have a Whirlpool Quiet Partner 1, Model DU1055XTPQO. I use Cascade w/Dawn Shine Shield powdered detergent(filled to the mark on the dispenser cup) and Jet Dry Drying Agent. Problem is all of my glasware is horribly etched, my dishes and glassware are severely spotted, and my stainless steel silverware have sort of a rainbow-like stain. PLUS, EVERYTHING IN THE DISHWASHER HAS A HEAVY SOAPLIKE FILM LEFT ON IT,to the point where I wonder if it is safe to use it for fear of chemical residue that's


Its not soap actually it is calcium build up. The problem is hard water. There is a new product out called the dishwasher filtration system. It filters the water before it enters your dishwasher. It works amazing and has a money b ... Whirlpool Dishwashers

About a 3 year old maytag stainless steel inside dishwasher, not cleaning, often soap resdue on dishes or silverware, I use fresh new cascade, checked to see if washer fills with hot water, seems to up to the bottom of the door when I open durning cycle, arms go around, no obvious plugging of the screens, no junk in the foot chopper propeller, no paper or plastic or food in the jets of the arms. Motor went out on it 9 month ago and I had it replaced by appliance repair station here in Missoul


Water must be 130 Deg F to wash properly. ... Maytag Dishwashers

I have a three-year-old Sears Kenmore Elite dishwasher. I find that despite the fact that we scrape and rinse our dishes before loading the machine, after each three months of use (two loads a day) or so, I have to take the machine apart (spray tower, racks, bottom impeller, bottom screen housing, food grinder cover) and clean-out the food grinder area, for it fills-up with sludge. The sludge restricts the water flow and there isn't enough flow to turn the impellers via that steering jets.


Have you tried different detergents? Some detergents after getting wet and going through the wash cycle with the debris from the wash turns into a grease substance that grimes up in some dishwashers. Try running the machine with hot water this someti ... Dishwashers

Maytag dishwasher jet clean eq plus water not filling with water


My Maytag Jetclean Flexiload is 4 years old. Upon choosing a program the timer counts down but little action is heard. Near the end of the cycle an Error message comes up. The dishes are stiil uncleaned. ... Dishwashers

My daughter accidentally filled the Jet Dry dispenser of our dishwasher with Windex.


You will need a technician to remove the rinse aid dispenser and empty the windex out. Or just buy a rinse aid that can be hung from the upper rack. The amount of liquid released from the dispenser is a small amount and I don't think it would cause a ... Whirlpool 24 in. DU1100XTPS Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1270 seconds