Having problems with your Frigidaire 24 in. FDB635RF Built-in Dishwasher ?

I just installed my diswasher and im not getting power to the unit. It was given to me by a friend and worked fine for her. All of my connections are good and the breaker is not tripped


Answers :

Are the power connections to the unit 'hard-wired' or a plug and socket connection? If a socket, try a lamp in the socket to make sure that power is present. Otherwise, the power connection junction box at the machine should be checked with a voltmeter for 115 volts AC. If ok, then there is a problem within the machine. At this point, you may need to enlist someone that can troubleshoot the wiring and switches inside. Hope this helps!
Repair Help & Product Troubleshooting for Frigidaire 24 in. FDB635RF Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I just installed my diswasher and im not getting power to the unit. It was given to me by a friend and worked fine for her. All of my connections are good and the breaker is not tripped


Are the power connections to the unit 'hard-wired' or a plug and socket connection? If a socket, try a lamp in the socket to make sure that power is present. Otherwise, the power connection junction box at the machine should be checked with a voltmet ... Frigidaire 24 in. FDB635RF Built-in Dishwasher

My Kenmore Dishwasher won't turn on. Was working fine last week, but when I went to start it yesterday, nothing starts or lights up when I push the button. The options buttons still light up, but thats it, the wash cycles and the start and stop buttons...nothing happens. I tried tripping the breaker to reset and it did no good.


Hi,\015\012\015\012A device may cease to function or operate sporadically if the electrical cord is damaged. Inspect the cord for any damage. Check whether there are any black smudges or burn marks on the outlet, cord or anywhere the cord comes ... Kenmore 15129 Built-in Dishwasher

My dishwasher won't turn on and makes a high-pichted ringing noise. The problem began when our power went out during a storm. The circuit breaker works as the disposal is connected to the same breaker and still works. The nosie stops when I trip the breaker. The unit is almost 6 years old and is a Profile.


... GE 24 in. Profile PDW8280JSS Built-in Dishwasher

Karcher 2.35. used it for about an hour, working fine. Suddenly motor stopped. Checked fuse and conections...all good but no go. Disconnected water hose and gave it a rest. As I was putting it away, connected to power and motor worked. Connected hose and motor won't work!! HELP! Thank you, Cliff Taylor


... Karcher Pressure Washers

I was using my Karcher 350M pressure washer working fine but it just stopped having tripped the power boards circuit breaker. The breaker now trips each time I switch on the washer. There is no smell of burnt motor and the electric did not get wet when last in use. Appreciate any suggestions or tests that can be made. I have a decent multimeter. Thanks.


... Karcher 1750 Psi Elec Pressure Washer

I have a GE Quiet Power 3 dishwasher that was working fine last week. Over the weekend I ran it and we could hear a banging noise, so my boyfriend opened it three or four times in a row (during the cycle) to figure out what it was. The fourth time, it went dead. I checked and it had tripped the breaker. I reset the breaker and the dishwasher seemed to be working again, however the lights on the front were flashing (they hadn't previously), and now it will run for about 10 minutes but no water ru


Were you able to figure this out? We have the same problem here! ... Maytag Dishwasher

Dishwasher fills with water and then stops. No lights are on at all. I cked wiring and circuit breaker and no issues there. I then flipped off circuit breaker over night. Got up next morning and flipped breaker back on. Dishwasher lights were on and when I pushed Start button, it ran fine. Now it is doing same thing except circuit breaker trick dont work like last time. THERE is NO issues with wiring or connections to dishwasher.


... Whirlpool 24 in. GU2500 XTP Built-in Dishwasher

My dishawasher is acting like it's getting no power turn it on and nothing happens it worked fine last time i used it this time filled it turned it on and got nothing took front pannel off all wires are fine good connection not burned lose or anything took bottom kick plate off all wires are fine not chewed burnt or loose


Try to reset the system by the breaker.the breaker may be tripped it should be a ground fault breaker ... Dishwashers

My ge pdwt 280vss will not turn in, breaker is good and power to dishwasher itself is good as are wire connections


... GE PDWT280VSS Profile Stainless Interior Built-In Dishwasher with

WILL NOT TURN ON. PLUGGED IN, OUTLET IS FINE, WALL CIRCUIT BREAKER NOT TRIPPED. WORKED FINE AND THEN JUST STOPPED.


... Miele 24 in. G892SCU Plus Built-in Dishwasher

The dishwasher stop during the wash cycle. It did finish draining the water from the tub. The machine is not showing a power signs, I check the circuit breaker and the fuse is not tripped. I open and closed the door and the door latch seems to be working fine. There is just no power to the washer. Usually when a machine breaks down, there still is power or buttons that light up on the front of the machine. I looked on the internet and many say that the fuse could be tripped. No where can I find


... Whirlpool DU912 Dishwasher

Miele G892SC dishwahser trips circuit breaker when turn the power on. Worked fine yesterday, but doesn't work today.


... Miele 24 in. G892SCU Plus Built-in Dishwasher

Model KUDM24SEWH1 dishwasher stopped running. Had to remove dishes and clear water from bottom. No response from operation buttons. Circuit breaker not tripped. Other outlets on same circuit work fine.


... KitchenAid Dishwashers

Control panel will not light up, the dishwasher was running and now it has stopped mid cycle and will not do anything. I just replaced the control panel (black plastic with buttons, not control circuitry). was running the diswasher and it seemed to be working fine, then stopped. water is standing in tub, I checked the float, I don't think the float is the problem. There is power to the outlet, no tripped breakers. But control panel will not light up.


I have a kitchenaid dishwasher model # KUDC10FXBL1 I went to start it and none of the buttons were working. I have checked the breaker and the wiring and everything seems to be in order. ... KitchenAid 34 in. KUDP01FLSS Stainless Steel Built-in Dishwasher

No water The washer was working fine, but now it says it's running through the cycles, but no water? I made sure the water line going in was good. Could it be the little pump that connects to the water line?


Maybe the solenoid that lets the water into the DW is not actuating ... Kenmore 24 in. 15932 Built-in Dishwasher

Gibson Quiet Clean 1 dishwaser was working fine. Now not power and bottom of washer full of water. Breakers are good, and no leaks on the floor


... Dishwashers

My (approx) 25 yr old whirlpool dishwasher, model DU8100XT, will not start. It had been working fine, no problems for 6 years since we moved in. I have reset the circuit breaker though it was not trip


... Whirlpool Dishwashers

Our dishwasher was working fine (about 3 yrs old). Woke up in the morning and went to unolad it. There was a small amount of water in the bottom and it does not respond. No power, lights, nothing. I checked the breaker and it had not tripped. Any suggestions?


First turn off the breaker. Once you have the power off, take off the bottom panel.You will see where the electric wire comes into the dishwasher, it should have a small cover over the connections.Take off the cover and you will most likely find that ... LG Dishwashers

Mid-cycle Dishwasher not working following a circuit breaker trip


... Dishwashers

I just bought the Kenmore Ultra Wash Dishwasher model # 665.1389. It worked about 4 times then before the it finished it lost power while it was running. Now it won't turn back on at all. I done everything in the trouble shooting manual and nothing worked. It's not the circuit breaker either. Everything else on the same breaker works fine. What could it be?


... Kenmore PRO 24 in BuiltIn Dishwasher with Ultra Wash HE Filtration 13173

Hi there I've got a Miele G572 dishwasher that works perfectly, except that it trips the circuit breaker when it tries to fill with water. The heating works, the timer advances, the spary arms rotate and it drains well. It is a second-hand unit that worked for about 3/4 of the first cycle, then it tripped the earth leakage detector. Cheers John


If it it is tripping the circuit breaker when filling , then the problem is localized to following parts:Inlet Valve.Wiring Harness to Inlet Valve.Water Level switch.Timer control Board.Afte ... Miele G2670SCSF Dishwasher

Hi In the middle of a wash cycle, my dishwasher tripped the circuit breaker on the wall. I diagnosed this by unpluggin dishwasher, plugging in a different appliance and switching circuit breaker back on. new appliance worked OK. When dishwasher had cooled, I tried it again on same circuit (which I knew was working properly). The lights came on for about three seconds, and then the circuit breaker cut back in again, so I knew it was the dishwasher that was causing the problem. Is there anyt


Ck the connections where the cord hooks to the wiring harness. look for hot or shorted wiring . also ck the contro panel for the same . generaly if you have a power draw like you are saying then you can see t ... Dishwashers

My Frigidaire model GLD2155RDC1, installed in 2007, stopped working after we lost power. When we flipped the circut breaker back on the lights for Air Dry and High Temp Wash started blinking, but none of the other buttons work and when we open the door these lights stop flashing and there is no power for our machine. We tried tripping the breaker a few more times and it kept doing the same thing.


... Frigidaire Dishwashers

When we switch the dishwasher on it trips the electricity. It's worked fine for 2 years but now won't work at all and just trips the electricity.


Your dishwasher has a serious electrical safety fault which is causing the protective breaker to trip (although it may have a simple and cheap cause). With all due respect, your question clearly demonstrates that you lack the knowledge and skills to ... Beko Dishwashers

Amana Dishwasher Model #ADB1500AWB3 (Purchased 7/2009) worked fine on Friday, and last night would not turn on, no green lights at all. We check circuit breaker, and electrical outlet but they were working fine. Do you know what might be wrong?


... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0814 seconds