Having problems with your Frigidaire 24 in. FDBB540 Built-in Dishwasher ?

Wiring a new dishwasher

\015 Is it necessary to change our aluminum wiring to copper wiring when installing a new dishwasher?\015

Answers :

No but aluminum wiring is dangering by itself when it heats it expands when it cools it contracts and loosens its own connections not a great in my opinion but wont hurt the dish washer
Repair Help & Product Troubleshooting for Frigidaire 24 in. FDBB540 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

KitchenAid dishwasher Hi I have kitchen aid kds 20 dishwasher around 25 years old it has a broken motor and I was trying to put a new motor in it,the old motor has 3 wires white,black and ground but no extra startrelay. the new motor (partno: 4171686 from whirlpool) has 4 wires white,black , yellow and ground , also in package was startrelay but no wiring info for this motor. I Need wiring info if someone can help. Regards. Bjorgvinj


... KitchenAid Dishwashers

IDL750 - Fuse trips when turned on. HELP! We had some electricians here to install a new electrical socket for a new fridge. They put the new socket in the same wiring as for my existing dishwasher!! The first time I tried to start the dishwasher cycle with the new fridge plugged in, the circuit box fuse tripped. Now, even with the fridge turned off, the dishwasher makes the fuse trip when turned on. Is there a fuse inside the dishwasher that has blown and needs to be replaced? or a ground brea


Hi.The first step is understanding if the problem is the socket or the appliance. Find an extension long enough to reach a different socket. Move the appliance to reach the power cord, and connect the dishwasher to a different power sock ... Indesit 24 in. IDL700 Built-In Dishwasher

TV static I just installed a new dishwasher. When it is running, it causes static lines on the TV. Prior to the new dish washer, I did not have this problem. It is wired correctley, and not on the same circuit. As I stated I did not have this problem until the new dishwasher. I called the service people for the dishwasher, and they stated they could not help me. Have you got any ideas, or do they make some type of filter I can put on the line to the TV.


There should be a suppressor fitted to the mains terminal block on most dishwashers. if this is not the case you will have to get hold of one you plug in. regards ... Dishwashers

I purchased a new dishwasher on 2/22/07 at the Home Depot in Parksburg,Pa. I first had to have it repaired on 4/28/08 for wires stuck to inner door. They repaired two broken wires and added insulation so wires do not stick to the door. The second repair was a little more than two months later. On 7/18/08 they had to install a new motor because the motor locked up. Both times I waited several weeks due to not having money and appliance center being busy. I used J.B Zimmerman in Blue Ball,P


Hel1Dav2,\015\012\015\012I understand your frustration with having to deal with major repairs to a new applaince. However, I don't belive this is the correct forum that you need to use. I have found a helpful link that you may try in th ... Dishwashers

I am trying to attach electrical cord to new dishwasher. The cord only seems to have the green wire in a colored sheath. Does it matter which wire on the cord goes to which color in the dishwasher?


YES it does. Green goes to ground or bare copper wire, white goes to white, and black goes to black. ... Whirlpool Dishwashers

I have a new timer unit for my ariston LS2020 dishwasher, dont know what color wire go on what wire tap on the timer. The new timer c00057632 is not same as the old .


... Ariston Technologies Dishwashers

There was a short in the junction box. i fixed that by stripping wires and installing new wire nuts. the dishwasher ran. for some reason the water is NOT entering the dishwasher


There is a chance that the coil on the fill valve has become bad. If the valve was being operated at the time the short occurred the coil could have overheated and burnt up.A couple ways to check it would be;\015\012\015 ... Bosch 24 in. SHE44C02UC / SHE44C06UC / SHE44C07UC Built-in Dishwasher

My bosch dishwasher new pump has a extra wire pos thermal protection which original pump has not do i just leave after tapeing it or do i need to wire it in somehowm


... Bosch Dishwashers

DIHR model DS50 no instruction on how to operate the dishwasher and can't get it to go through it's cycles or instruction on electrical hookup . had electrition wire it but he wasn't sure it was right because no instructions Bought it new but when they deliver it there was nothing but the dishwasher .I can't get them to do nothing to help me.So I have a dishwasher I can't use.


... Dishwashers

Wiring a new dishwasher


No but aluminum wiring is dangering by itself when it heats it expands when it cools it contracts and loosens its own connections not a great in my opinion but wont hurt the dish washer ... Frigidaire 24 in. FDBB540 Built-in Dishwasher

DW60 new world Dishwasher - opened the door and wires disconnected


... Stoves 27 in. DW60 Built-in Dishwasher

My Maytag Dishwasher MDBH750AWW will not turn on. Pressing the key pad on the top front does not activate the controls. I traced the wiring and found it is active in the door latch assembly, which I recently replaced. Question: 1) If I purchase a new Control Panel exterior white key pad, which is linked to the interior Control Board, should that solve the problem? Or,2) if I purchase a new exterior Control Panel finger touch pad, and an interior Control Board, will that solve the proble


... Dishwashers

My dishwasher did not come with power cord. what kind of cord do it need and how do i connect the cord? On the new cord how will i know which one to connect to the white and black wire? The dishwasher is Whirlpool model du930pwsb, Sku numbmer 451-5344.


120 Volt 16 gauge, 3 wire power cord.\015\012\015\012Brass Screw is Black, White Screw is is Common, Green is Ground....Try Home Deport for a cord. If no screws are on the dishwasher, use wire nuts and elec. tape ... Whirlpool 24 in. DU930PWP Built-in Dishwasher

Broken dishwasher idl350 dishwasher fitted a new element but it still wont heat the water what coud the problem be. have checked on everything i can think of but it stil wont work. would it be eney broken wires it the door?


IF your dishwasher is a 220 volt unit find and reset BOTH breakers for it. Also make sure someone hasn't inadvertantly hit the"heat dry" button to off. ... Dishwashers

We replaced thermal fuse (inc all wires), worked for about 2 months. Replaced thermal fuse again, ran it 2x's, 2nd X it broke. We have a new thermal fuse on hand, but need some advice on what could be causing the problems. When the dishwasher does work, it cleans as if new.


Probably a bad heating element, You may want to change that to before replacing the fuse again. ... Dishwashers

I was chatting with Daniel S. about a Maytag dishwasher that the lock #3 light was on.I took the number pad out and checked for water or wiring problems with the ribbion or pads and there was nothing that I could see wrong. All wires were like new and tight in connector. Any more suggestions?


You should go to your FixYa user area . . .\015\012\015\012http://www.fixya.com/users/kcubsd6107\015\012\015\012. . . then click on the chat you had with Daniel S in the "My Problems" list. This will open a transcript of the c ... Dishwashers

I have a new switch for electrolux dishwasher numbered 1 to 6 and need to know which wires connect to it I have 2 black (bulb) single brown, single blue, double blue single black which wires goto which number on the switch ?


... Electrolux 23 in. ESI602 Free-standing Dishwasher

I have a diplomat adp8332 integrated dishwasher showing an F3 fault code.I dismantled the door casing and found that the wiring sheath had split and cut through 2 wires.I have repaired the wires and fitted a new sheath,the F3fault code still appears(no heated water and only rinse cycle)Could the PCB have part blown or the heating element?


... Dishwashers

My new dishwasher has three wires and my house only has two


... LG LDS4821ST Stainless Steel 24 in. Built-in Dishwasher

Dishwasher handle assembly is broken. how do i disconnect the wires from the old one and hook it to the new one?


Take the screws out in the dishwasher door and open it up. Then move it over wire for wire from the old to the new. ... Dishwashers

Re: bosch-integra-500-shx45p05uc PEASE, please, tell me how to turn off the annoying signal that comes on at the end of the cycle!!!!! Who had the big idea to add this feature and what is so important about being alerted when the dishes are clean? And if it can't be turned off, is there a way to disconnect the wiring and disable it? If so, how and if not, is it legal to shoot your brand new dishwasher or throw it out the window? Thanks so much!


... Bosch Integra 500 SHX42L15UC 24 in Builtin Dishwasher

I am installing a new pump on my asko dishwasher pump but not sure which wire goes where


There should only be two or three wires main wires brown & blue or red & black. green or green with yellow stripes is earth wire main wires connect to pump motor earth connects to earth point hope this helps ... Asko 1385 Dishwasher

DISHWASHER QUIT WORKING IN ALL WASH CYCLES EXCEPT SHORT WASH CYCLE. YES I HAVE TRIED TO FIX IT. I HAVE REPLACED THE CONTROL MODULE WITH A NEW ONE. ALL WIRING LOOKS CLEAN AND IN GOOD ORDER. NO EVIDENCE OF CORROSION. NOW UNIT WILL NOT WORK AT ALL, BUT "CLEAN LITE INDICATOR' IS FLASHING IN SEQUENCES OF 7. I HAVE FOUND THE SCHEMATIC SHEET BEHIND THE KICK PLATE. AND USING IT I HAVE TRYED TO USE THE DIAGNOSTIC PROGRAM BUT CANNOT FIND ANY PROBLEMS. AFTER DIAGNOSTIC PROGRAM IS COMPLETE THE DI


Hello,\015\012\015\012Welcome to FixYa.\015\012\015\012With the symptom you`ve described ( specifically the clean lite ) this is an error of poor water circulation or a heating fault...many times manifesting in th ... Whirlpool Dishwashers

Dishwasher is Amana ADB 2500 AWB. Door handle broke. Installed a new Latch Assy. (many buttons were pushed during process) Now .. door latches good. But when start is pushed, nothing happens. (all the cycles and options will light up) Is there a reset button? Could I have connected a wire incorrectly?


... Dishwashers

Dishwasher started smelling funny like electrical smoke. I opened up the top by the digital read out and noticed one of the wires was charred and had been smoking. worth it to call repairman? or buy a new one.


I would call a repairman or just cut out the bad spot in the wire and use a **** connector and splice in some new wire. Maybe a new connector because it may have been caused by a loose connection drawing heat due to arching. I doubt its a major issue ... Kenmore 24 in. 15079 Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1498 seconds