Having problems with your Frigidaire 24 in. PLD2850 Built-in Dishwasher ?

The slide on the upper basket keeps falling out. It's been fixed twice but doesn't hold. The second repair man who put the slide back in the rollers said he couldn't see anything wrong with it, but it still didn't hold, so he called your tech dept. who said they had roller and slide kits at a total cost of $66 for this model. The slide kit had a new part number but the tech department didn't tell the repair man why they'd changed the part. The roller kit was one for dishwashers the sides o


Answers :

One option is installing stainless steel washers on the rack supports that screw into the side of the tub. The rack falls down because there is too much "slop" with the rack...a couple small washers to space them tighter normally does the trick.
Repair Help & Product Troubleshooting for Frigidaire 24 in. PLD2850 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The slide on the upper basket keeps falling out. It's been fixed twice but doesn't hold. The second repair man who put the slide back in the rollers said he couldn't see anything wrong with it, but it still didn't hold, so he called your tech dept. who said they had roller and slide kits at a total cost of $66 for this model. The slide kit had a new part number but the tech department didn't tell the repair man why they'd changed the part. The roller kit was one for dishwashers the sides o


One option is installing stainless steel washers on the rack supports that screw into the side of the tub. The rack falls down because there is too much "slop" with the rack...a couple small washers to space them tighter normally does the trick. ... Frigidaire 24 in. PLD2850 Built-in Dishwasher

I have model number KUD 101TJBL0. I have spent about 300.00 on repairs. It keeps blowing the thermal fuse. I have had it replaced sev. times. My repair man has given up on solving the problem. I did read on another website that you need to replace the wiring kit that comes with the fuse. Me service man never did that and when I asked him about it he said that is not the problem and would not replace it. So, before I just scrap my diswasher and but a new one I thought i would order another fuse k


Hi,This applies mainly to Kenmore Dishwashers with the model number\015\012665.15835791 but also to any Whirlpool or Kenmore dishwasher with an\015\012electronic display. There are several possible trouble makers on this\015\012dishwasher ... Dishwashers

I have an Electrolux dishwasher Model # EIDW6305GS1. I am getting an error "01", which means a leak is detected. It did this 5 months ago and the repair man replaced the pump and control panel. Now, after it happened again, I contacted Electrolux. The sent me a Leak Repair Kit, but with no instructions. I contacted Electrolux again and they said that they could not provide the installation guide. Can you help me located the installation guide or offer assistance?


... Dishwashers

My dishwasher recently started leaving a white, chalky residue on all the dishes. It wasn't gradual at all. One day everything was fine and all the dishes clean and the next they were covered in nasty residue. We've ruled out any issues with soap, rinse agents and hard water. A appliance repair guy came out and said the float was "tampered" with and said that he fixed it. He said that if the problem came back we need to order a new float assembly kit. My husband has looked at it several times an


Hi, \012I have an older dishwasher also and recently my wife alsocomplained about it not cleaning right... so me being the man I am tried invain to clean the things... Bought new spray arms online and installed them inminutes...now the thing works li ... Whirlpool Dishwashers

Dishwasher overfilling Our dishwasher continues to fill and drain and won't stop. Our repair tech said the control board is bad. This is a minimum $400 repair. What are our options? If any.


I have been working on ASKO for several years and have never seen one fill and drain at the same time. Usually if it drains and cannot be stopped, it is because there is water in the lower tray that needs to be removed or left to evaporate, and then ... Asko D1776 Built-in Dishwasher

Bosch repair tech's came to look at this dishwasher, he said the control module blew out and they need to order one, they also said it wouldn't be in until mid Decemeber. Is there one specific control module for this unit ?


... Bosch SGE63E05UC 24 in Builtin Dishwasher

LG D/W Mod# LDF6810ST We have replaced control asm.,heating element, still not drying at all, A service tech said that it needs a Retro fit kit??? What the hell does that mean!


HI. Which control assembly did you replace?There are two PCB control assemblies and one main PCB control Board. which one did you replace? ... LG LDF6810ST Stainless Steel Built-in Dishwasher

Started dishwasher and then it stopped, still has power going to it but control panel does not respond. When less than a year old, the same thing happened and the repair man said it was a thermal coupler.. is that the same as a thermal fuse and does that sound like what it may be again?


... KitchenAid KUDD03STSS Stainless Steel 23 in. Built-in Dishwasher

My Samsung DMT800 series dishwasher has had the main control board replaced under warranty three times since I've had it. The problem: The unit won't activate via the touch buttons until I pull the plug for a second and "re-boot" the device. It then works for a few days or a week and fails again. The last board was replaced two weeks ago and it has failed only once. I'm waiting for it to fail again before I call Sears home services again. Has anyone else had this issue? My repair man has said y


... Samsung Dishwashers

I purchased a Bosch dishwasher and had it installed into my new kitchen. It is plumbed and it does not work, a reapair man said it needs a new motherboard. My issue is that Bosch can't seem to supply central Wi. with this part. The repair place put the order in two and onehalf months ago and still cannot give me a date about when the part will be in. I have owned this dishwasher for five months and have not been able to use it once!


... Bosch Dishwashers

Hello I have a built in DCS dishwasher - width 24" heigh 35". It started smoking out the front and the repair man said it needs a new control board. Is that possible or should I buy a new one. IT is not a dishdrawer its a full dishwasher. the top rack is also broken. If I need to buy a new one - where from - new jersey area


Http://www.thefind.com/appliances/browse-dcs-single-dishwasheryou can purchase online from here... ... Dishwashers

LG pump I had a repair man come out and he said we need a new pump. cost is approx $350.00. Any suggestions?


... LG 24 in. LDF 7811 Stainless Steel Built-in Dishwasher

My bosch shx57c05uc is not cleaning my dishes. It leaves food on the plates and does not rinse properly. glasses are spotty I have check rinse aid and reduced soap usage any ideas? I had a repair man just push a few buttons and said it was not using the hot water cycle. but he did not show me how he did it, maybe it needs reset again. any ideas?


... Bosch 24 in. SHX57C05UC Stainless Steel Built-in Dishwasher

Buzzing sound we have a gold quiet lll edition , it is now buzzing when we start it. we have had a repair man here twice each time he has taken it apart and cleaned it. he has said because we have hard water, the water oxidized and some sediment has broke though the seal into the motor and now we need a new motor. does this sound right? we have had dishwashers from whirlpool for years prior. never had to change a motor. please can you offer some suggestions? thanks very much desperate in Mexico.


If buzzing while it is washing then probably is a motor problem but mostly not from hard water just poor quality parts ... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

WE have a LG dishwasher model LD-14AW3. It recently stopped working properly and stopped draining the water. WE called our dishwasher repair man in and he said he thought it would need a new board and we would be better off to discard the dishwasher.I took the dishwasher downstairs to discard but left it there for awhile as I still had reservations about it. I took it in and hooked it up again it worked very well doing the whole cycle. We brought the dishwasher back up into its place and it con


Hello, welcome to FixYa.\015\012\015\012The OE code is designed to indicate an overfill error, however there has been a revision made on these dishwashers since they can often incorrectly display the error. I doubt if there is anything very serious w ... LG Dishwashers

Our kenmore dishwasher... 8yrs old.least expensive model stopped draining. Husband tried fixing it and couldnt. Before we paid a repair man 75.00 dollars just to look at it...I shopped on craigslist. A lady was selling a ''6yr old kitchenaid'', that she said she paid 800.00 for and would sell to me for 100.00. She was just ''upgrading all her appliances''. Anyway...I bought it...thought Id rather put 100.00 into an 800.00 dollar kitchenaid as oppose to mine. I ran it last night for the first tim


Only if you choose to think so. I have seen old equipment in better shape that much younger vintage stuff! It depends on how much use it has had and if it has been run to the max with heavy loads to the point of making the machine beat itself up pre ... Dishwashers

My Kitchenaid dishwasher is not cleaning the dishes. Had a local repair man looked at today. He tried cleaning, but still not working. He said it is a motor problem that will cost $400 to replace.


Hi, \012I have an older dishwasher also and recently my wife alsocomplained about it not cleaning right... so me being the man I am tried invain to clean the things... Bought new spray arms online and installed them inminutes...now the thing works li ... KitchenAid 24 in. KUDS02FRSS Stainless Steel Built-in Dishwasher

My mother has cancer so needs me to research her problem with her dishwasher. My mother's sink drain water is emptying into the dishwasher. It has to be manually removed since she does not cook much and therefore no longer uses the dishwasher as much as she used to. Is there anything I can do without calling a repair man or plumber? And if I must call a repair man, which should I call, a Maytag repair man or a plumber?


Problems associated with water from the kitchen sink back filling into the dishwasher are caused by the drain line on the dishwasher not having a high end loop. In simple terms, the dishwasher line is too low and is providing a path for the water to ... Maytag Dishwashers

Viking professional dishwasher DFUD142 panel lights flashing, and cannot turn of pump, need to cut power, will not go on? worked perfectly 4 yrs. what to do? repair man did not fix.


... Viking DFUD142 Built-in Dishwasher

My Fisher Paykel dishdrawer DD605 won't turn on. There is power. It stopped working when a repair tech changed the inlet valve.


Http://www.jordansmanuals.com/ServiceManuals/FP/Dishwasher/DD605/DD605%20Parts%20Manual.pdf\012\012Read ... Fisher Paykel Fisher & Paykel DishDrawer Tall DD24DCHTX7 Semi-Integrated Double DishDrawer with 14 Place Settings, 9 Cycles, Eco Option, 163 Degree Sanitizing Temperature, Delay Start and Adjustable Racks: Stainless Steel with Water Softener

My dishwasher makes the sound like it wants to start but doesn't. I had this problem about 4 years ago but the repair man would not allow me to see what he did. It took him all of 30 seconds to do something under the front of the dishwasher. I do not have the money to call the repair man again. Please help. I have a ge dishwasher.


You my have allowed your dishwasher to sit for a while. The seals in the motor and the pump can get frozen. Sometimes high minerals in the water can stick the seals together not allowing the motor to run and it hums.\015\012\015\012 ... GE 24 in. GSD4320Z Built-in Dishwasher

I have a electrolux EIDW6105 dishwasher,since new,after a load of dishes are done,by the end of the day,the inside of the dishwasher smells so bad,like rotting food,it is almost unbearable to smell.I had a service tech come and check it out,he said the washer was not installed correctly,was not level,I made the change,same problem,then he said I would need to use DISHWASHER MAGIC once a week,same resault,then he called electrolux tech support and they told him that it was nomal and I should run


... Electrolux 23 in. ESI602X Built-in Dishwasher

Dish washer does not drain after the cycle is complete. The last few months when the dishwasher is done their would be a small amount of water left in the bottom. It didnt create any problems but would smell after a few days. So we would just run the drain cycle and it would empty. Well i got home to and the wife said the it was really full. The water was dirty and when you run the drain cycle it didnt drain. She said the dishes were clean. So i cleaned the vent, and filled the sink with


Check drain hose and drain pump.End of drain hose must be in same level with machine.Try it. ... KitchenAid KUDR01TJ Dishwasher

It has stopped working, There is power going into te machine. An engineer from Repaircare said it was the programmer, ordered a new on vcame to fit it said it was te wrong one. Ordered anoter one Whirlopool saaid it was out of stock, on back order. Waited 3 weeks engineer came with new programmer, fitted it it didnt work. Said maybe they can't fix it. Thew nachine is only two years old and a popular make. WHAT CAN I DO???


Hi,I am sorry to hear regarding the problem. You need to have some patience in order to find what's actually work with the Dishwasher. I cannot jump to the conclusion as there might be "N" number of reasons.Now, Fi ... Whirlpool Dishwashers

Blown Motor DW is about 16 months old. Started making some real bad noise. Lasted about a minute and then had a death howl. Called in repair tech who says motor is blown. $399 for repair which includes $125 for the part. I've rebuilt car engines, so can probably replace a DW motor. Any insight on how to replace the motor? is it worth paying 275$ for labor? Just bugs the hell out of me paying $400 bucks for a repair when i can get a new one for $450.


I haven't changed that particular brand of dishwasher motor, so I cant give a step by step, sorry. I do know the other brands it is optional to get the motor alone or the motor with the pump assembly attached, so you may want to ask abo ... Maytag 24 in. MDBH950AWS Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0559 seconds