Having problems with your Frigidaire 24 in. PLD3465REC Stainless Steel Built-in Dishwasher ?

Replaced the keypad display after having the "ER" code

\015 Now it shows the lock light and no heat light on the top display. This is the third keypad display that has been replaced on this unit and its getting annoying. What would you suggest? Thanks...\015

Answers :

Hi,
\015\012
\015\012
\015\012Push the heated/dry button on the dishwasher for some seconds 4 to 20 and that will unlock the dishwasher. This is just a safety feature that allows you to lock the dishwasher to stop kids from pushing buttons.
If that doesn’t’ work they will send out a tech to fix it.
Is it not wise to replace a keyboard after getting this pain in ***?
Repair Help & Product Troubleshooting for Frigidaire 24 in. PLD3465REC Stainless Steel Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Replaced the keypad display after having the "ER" code


Hi,\015\012\015\012\015\012Push the heated/dry button on the dishwasher for some seconds 4 to 20 and that will unlock the dishwasher. This is just a safety feature that allows you to lock the dishwasher to stop kids from pushing but ... Frigidaire 24 in. PLD3465REC Stainless Steel Built-in Dishwasher

On my bosch shu66 diswasher the error code indicates a number 1, aqua sensor I think. There is a screw missing in the soap dispensor and it's been letting water into the door interior. could this be repaired by replacement of the screw and drying out the interior insulation and wiring The solution I tried didn't clear the error code on the panel. Is there a reset or do I need to replace the aqua sensor or ? The machine still won't start and displays a #1 on display. There is no water in the whi


... Bosch 24 in. SHU66C02 / SHU66C06 Built-in Dishwasher

My Whirlpool Duet, model WFW8400TWO2, powers up but then shuts off when I hit Start. There are no error codes displayed. I replaced the CCU and ohmed the door switches, the pressure switches, all okay. This failure happend about a year and a half ago but I wasn't around to see what was replaced under warranty. Any ideas?


... Dishwashers

I have a Frigidaire dishwasher (FDB2810LDC1) and a Er code appears in the display with the sensing, rinsing agent low, sanitized, and clean lights all flashing as is the child lock light. After seeing the Er code, I opened the dishwasher and thought I heard the detergent tray open but most of the detergent was gone with a little remaining. This has happened before and we have had the electronic panel replaced twice. Could it be something else like something blocking the detergent tray from op


... Frigidaire Dishwashers

The display panel displays random numbers and jumps around... When I start the dishwasher the front panel say: 180, then 67, then 39, then 69..68. 69. 66. 37. 180...etc... It seems to be running though... totally weird. The Control Board has NO error code. I replaced the Control Board. Didn't fix it.


... Electrolux Dishwashers

BOSCH DISHWASHER SHE45 REPLACED PANEL COVER NOW CODE C DISPLAYED


... Bosch Dishwashers

Replace cover on Bosch Dish washer> Now a C6 code is displayed in the window


I had the same problem after replacing the white panel on my Bosch SHE45M02UC with a stainless panel. I got the C6 error code. I called Bosch customer service twice and neither rep was helpful. One guy told me he didn't know what the C6 code meant. H ... Bosch 24 in. SHU43 Built-in Dishwasher

I had an IE code displayed on LD1415M LG dishwasher and replaced inlet hose (with builk in aqua stop valve). Afetr reassembly, dishwasher now tries to fill as soon as power switch on door is turned on, before program is selected.


Test the timer: can be bad adjust it. see the diagram for you check again any wires in wrong place, any devices with bad adjustment. ... Dishwashers

Code F on the display panel


... Thermador Dishwashers

Hi, I've got DS 603 single draw dishwasher Ser. No. CPM 739878, It has given a fl code for the flood switch. I have removed the draw and made the observation that the lower steel housing has partially flooded, hence the code. I intend to replace the flexible hoses Input and discharge hose. I am wondering once I replace the hoses, dry the housing and associated printed circuit bourd area should the fault code reset its self or is there further tech. assist required. The draw was manafactured


In the catch basis there is a printed circuit board that contains a sensor that detects moisture. Once throughly dry however, the sensor will no longer sense moisture and the flood code will cease and desist.BUT before replacing the hoses, (alo ... Fisher and Paykel Dishwashers

ASKO D3350 Dishwasher Displaying F4 Code


... Asko 24 in. D3350 Dishwasher

My Electrolux Dishles DX 303 Diswasher is displaying .50 on the led display after stacking and going to start it. It will work for a short time and then this code will display. What does it mean and


... Dishwashers

I have a Dishlex Global 500 dishwasher (DX500lWW*b). Woke up the other night to find water all over my kitchen floor. The hot water hose connector to the hot water tap split (bursted). The dishwater was not in operation at the time but I can only assume when the hose bursted the dishwater came on to alert me? the code on the dishwater is displaying ''oF'' - which means Incorrect fill level of fill time. I have consequently had the hose connector repaired but the display still has the code ''oF''


I found this\015\012\015\012"Hi - answer I was given by Electrolux Help was: pull machine out from under bench onto old towel, tip GENTLY onto left hand side (your left as you face the front of the machine) after it has drained, stand up ... Dishwashers

Display error code LE on Samsung dishwasher DMR57LFS?


... Samsung DMR57LFS Stainless Steel Builtin Dishwasher

I have a Bosch SHU5316UC dishwasher. The last two times it ran, my wife says the display said "CL" (for clean) after running through the cycle, but she heard a "motor running" until she opened the dishwasher. Attempting to run the dishwasher tonight, it won't start - it displays a "P" (error code?) when you attempt to start it. Can you tell me what the error code P is? Thanks, Dave


P stands for program in computer algorthms. The device displays program whenver chages were made to the default settings. A powered on devices least has malfunction only requires reseting to attaon default features. Depending on the type of device, r ... Bosch SHU5316UC Dishwasher

Dishwasher displays HE problem code and stops working


The heating element may be okay, could be the relay powering it -- or could just be dirty/loose connections somewhere in the circuit.\015\012\015\012Need to check the electrical continuity of the heating element to determine if it has fai ... LG Dishwashers

Code F2 I just replaced the door switch on an inoperable DD-602. My top drawer was working fine, but my bottom one has been offline for a while (door switch failed and I never got around to fixing it since I had the top). Well, my top finally failed too so I replaced both switches. Looks like everything is good on the top, but my bottom is erroring with an F2 code now. Kindof makes a thumping noise as it starts the cycle -- maybe 3-5 short thumps and then a 10 second delay, repeats. Any ideas? C


F2= \015\012The motor has not\015\012been sensed rotating\015\012\003 Foreign object has jammed the rotor\015\012\003 The rotor has failed\015\012\003 The hall sensor has failed\015\012\003 The electronic controller has ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

When the wash cycle takes longer than the time stated on the display, and when the dishes are done, there is about three inches of dirty water in the bottom of the drawer . The repair technician replaced the rotor this week, and says he needs to replace the display, but its still not working right


A couple of things to confirm first\015\0121. is the second drawer working oK - i am assuming you have a double drawer model?\015\012\015\0122. Are you not seeing the wash cycle time on the display? why does the technician want to r ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Dishwasher PLD 3465 REC I cannot reset the display panel. I took the kickplate off which was supposed to have the code for the reset but it had nothing related to reseting the display panel. It is stuck on 94 min clean time. What is the code to reset? There is nothing in the Use & Care manual that tells you how to reset.


Putting the unit into service mode will reset the the display. Look at the instructions behind the front panel. If the unit fills and does not wash, the wash motor may not be working. ... Frigidaire 24 in. PLD3465REC Stainless Steel Built-in Dishwasher

My dishwasher stops and displays a pf code when there is 38 mins left in the cycle. After it displays the pf code it restarts itself. So my dishes never get to go through a full cycle. What do I do?


Sounds like you need a new timer/control. They are preprogrammed to control the functions. Any change cannot be corrected. To replace try this link http:/ ... LG 24 in. LDS 5811ST Stainless Steel Built-in Dishwasher

BF72 won't empty,display light out blank display ,no error code


... Hotpoint 24 in. BF72 Built-in Dishwasher

I have a Maytag QuietSeries 300 dishwasher. My original problem was with the control panel lights not coming on. Another repair website recommended replacing the circuit board. We replaced the board, but it did not solve the problem & the dishwasher would not work. Replaced the control panel. Lights come on, but when the start button is pushed "21" flashes on the time display. What do I do?


HI,Just visit this link HERE and your problem will be solved.Goodluck,Please don't forget to rate the solution. ... Dishwashers

LE CODE i am having a le code, it says its the main pump motor. i replaced it and still same thing, fills and then does not start,times out 2 or 3 mins and LE CODE COMES ON.


Check whether you have 115/220V on pump's tags.\015\012In case you can't read 115/220V on pump's tags,\015\012your problem could be the water level switch. The switch level is usually a diaphragm device with a small clear tube attached between the sw ... LG 24 in. LDF 7811 Stainless Steel Built-in Dishwasher

Jenn-Air Expressions' Built-in Range. Two ovens top & bottom. Display unit on front fades out to blank. Display Unit called "Single Oven Display" NP-3; Date Code is 23-96 Robertshaw Jenn-Air BRK


... Jenn-Air JDB1105AWW Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0527 seconds