Having problems with your Frigidaire 24 in. PLD3465REC Stainless Steel Built-in Dishwasher ?

Model PLD3460RDC1 control panel not working...it's 4 years old

\015 The PF was on, so we reset the power source....no luck. It went into about a 1/2 cycle, soap never opened, then it stopped with water still in the bottom. Dishes have not been very clean in about month. sometimes soap won't open. tried new soap...not those little packets. got better results , but help bec I'm now handwashing dishes!\015

Answers :

Repair Help & Product Troubleshooting for Frigidaire 24 in. PLD3465REC Stainless Steel Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Model PLD3460RDC1 control panel not working...it's 4 years old


... Frigidaire 24 in. PLD3465REC Stainless Steel Built-in Dishwasher

Whirlpool 940 Series Dishwasher, Model #: DU940QWDQ3 I have lights on the control panel but when I push the buttons, all I hear is a click a few seconds later. The click is coming from behind the control panel. Nothing else happens. Dishwasher is about 13 year old.


... Dishwashers

Whirlpool 940 Series Dishwasher, Model #: DU940QWDQ3 I have lights on the control panel but when I push the buttons, all I hear is a click a few seconds later. The click is coming from behind the control panel. Nothing else happens. Dishwasher is about 14 years old


... Dishwashers

Have a 4 year old Kenmore Dishwasher Model # 74382. No problems at all until last week I went to start it and it would not turn on. Lights on the control panel were on with exception to the start light. I opened and shut the door to make sure it clicked and pressed the start button again and nothing. I tapped around the panel with the side of my fist and pressed it again and it began working. Well today different story I went to start it and it did the same thing. I tapped all over front of the


The problem is more likely the door switch is failing or out of adjustment/loose. You will need to remove the door panel. This is easy to do. There is a video at ... Kenmore 24 in. 74382 / 74384 / 74389 Built-in Dishwasher

My model # is 8573030. the machine is about 4 years old. the control panel failed after about 1 1/2 yrs. it has failed again. can I fix this myself? if so where can I find the parts?


Hi there. The correct part number for your replacement control board will be W10084141. The original control board that was shipped with this unit dose not exist anymore, at this time. Due to this f ... KitchenAid Dishwashers

No Power I have a kitchenaid KUDE70FXSS. It's just over a year old, and the control panel has no power to it. I checked myfuse box and the unit has power to it. I understand a common solution is to change the thermal fuse. How do I access it on this model?


... KitchenAid KUDE70FXSS Builtin Dishwasher

I have a Whirlpool Gold Model GU2700XTSBO its only 4 years old. About two weeks ago i noticed that the green lights were flashing and it would not run, I unpluged it for an hour and pluged it back in and the lights went away and it worked ok for the last two weeks. Last night I went to use it and there is no power at all to the washer, I checked the power source to the outlet and there is power there, so I dont know if there is a reset button or some control panel problem?


... Whirlpool GU2700XTSB / GU2700XTSQ / GU2700XTST Built-in Dishwasher

Model number: PDW9900NOOWW Serial number: ZL836778B 2-1/2 years old, residential use Rust is appearing on top of door around control panel and also bubbles under paint. Recently, there's a small leak under the door. GE is unresponsive. What can I do?


... GE 24 in. PDW9900LV Built-in Dishwasher

My Frigidaire dishwasher, model #FD949GFT2 (12 years old) has a blinking "CL" on the control panel and will not operate. The door latch "seems" to be engaging properly, any suggestions?


Hi,You are absolutely Correct. It sounds to me like the latch switch is not registering that the door is closed.However, as PF is also there, i am doubt, it could be Faulty Pad or Control Board. Most of the times, i have seen ... Frigidaire Dishwashers

Our dishwasher is no longer cleaning dishes very well and usually the detergent tab that we put in does not dissolve completely. Our dishwasher is a General Electric Model # PDN7800G00WW and several years old. The water here is very hard. On a separate note and a new development is the control panel seems to be messing up. When we press the ''speed cycle'' which is normally 37 mins it goes to 86mins and lights up the ''speed cycle:'' button. pressing the ''glass cycle'' lights up the adjacent '


Hi,\015\012\015\012There are various reasons for the Dishwasher not cleanig the Dish properly, From your query we can understand that, it must be issue with the Dishwasher selecter switch..\015\012\015\012DISHWAHER SELEC ... GE 24 in. Profile PDW7800 Built-in Dishwasher

Frigidaire Dishwasher - Model PLD3460RDC0 WE are having error code "ER" problems with the dishwasher. Over the past 4 years, the control panel has been replaced every year. It runs for up to a year, then needs a new control panel. Suggestions?


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks for using FixYa. You are right; these Frigidaire models\015\012have had some issues with both the control board and control pane ... Frigidaire 24 in. PLD3460 Built-in Dishwasher

MDB6709AWW1 Poor Quality Control Panel Our dish washer is 2 years old this month and the control panel broke!!! My service technician told me that he has seen DOZENS of new Maytag dishwasher control service panels break and is convinced it is a design flaw. When I called Maytag the customer service rep had the NERVE to tell me "that because the house is near the beach, I must get a lot of power outages and power surges, that is why the control panel broke." I told her I wasn't born yesterday


... Maytag Dishwashers

The start button on KitchenAid model #kudp01flbl6 will not engage, although all of the other lights in the control panel light when pressed. The cancel button will turn off the other lights in the control panel as well. This diswasher is 5 yeras old and lightly used in a household of just 2 professional adults. I've had service come and he uncovered a "burned' conection in the electronic control assembly p/n 8564542, which looked to me to be P8. A new electronic control panel was installed


HI. I need you to clarify somethign for me. You mentioned that you have replaced the " electronic control panel". Are you reffering to the interface board or the actual plastci panel? I understand that the part number "8564542" in in reference to the ... Dishwashers

Control Panel won't let me hit the start button. The dishwasher is a little over a year old and is used at most once a week. The blue light on the bottom right of the dishwasher seems to no longer light up. The control panel will let me select the wash, but the start button and time indicator does not light up. Not sure if this a real defect and if just a simple exchange of the front control panel will fix the problem? Already tried resetting the circuit breaker and that did not help. Than


... Dacor Epicure ED24 Stainless Steel Builtin Dishwasher

I have a MDB6759AWS3 that is one year and two months old. This morning I went to the control panel to press the buttons and some would light up and others would not. I disassembled the inner panel and looked at the "computer like" flat ribbon that connects the control panel to the main circuit board and noticed that some of the wires in the flat ribbon had deteriorated. I put it back together and pressed the buttons and they flash very dimly for a few seconds and got the dishwasher working bu


You may want to check the warranty iif it is a maytag or whirlpool, some have a 5 year warranty on the control and board. If not you can go to www.searspartsdirect.com to l ... Dishwashers

My bosch dishwasher's (model she45m) front control panel broke. When opening the door, some plastic broke and the front control panel cover came loose. I believe the latch is preventing the plas


... Bosch SHE45M06UC Built-in Dishwasher

Powder soap dispencer will not stay closed. Spring is good but it will not lock closed. I would buy another inside panel if I knew what the model was and where to buy it. This is about 20 years old. istalled in 1989. And can not find model or ser. no. I think it came off years ago.


I need to know modle # you can remove the toe kick and on the base of the d/w there will be a model # ... Dishwashers

I own a whirlpool gold model #GU980SCGQ3 . After the rinse cycle the dishwasher stopped . The water has not drained out and nothing on the control panel works when you press the buttons. The breaker did not blow on our main fuse panel in the house. Something similar happened a year after we bought it and the electrical panel had to be replaced under warranty. Is this the same problem? or something different?


... Whirlpool Dishwashers

Customer bought house with a Viking Dishwasher already there. He has no user manuals or documentation with the model number listed. None of the stickers on the side of the door have a Viking model number. This unit is a Quiet Clean System with Auto Water Heating and is (he thinks) about two years old. How can I find out what the model # might be or better yet how do I find out the part # to fix the main control board / interface. It just keeps blinking.


Check the back of the unit for a tag.... otherwise - removing the clock... it should have a part number on it.\015\012\015\012Thanks! ... Dishwashers

I have a 4 year old Maytag MDBH945AWW and the panel lights come on and I can select cycles... but the dishwasher wont start. I tried holding the start cancel button, tried turning the breaker off for a couple of hours, took the inner panel off the door and checked the latch, but its still wont start. Any other suggestions? If it needs a new control panel its probably better to just get a new similar dishwasher for $300, correct?


What you need to do is read for continuity and power across the door latch switch. (2 white wires) AND 2 Black wires Both wires must read continuty at the control panel connectors to the power source terminals for the unit to start. Since the co ... Maytag MDBH945AWW / MDBH945AWQ / MDBH945AWB Built-in Dishwasher

I have a 13 month old Bosch SHE58c dishwasher. The pump runs constantly and will not refill the tank. There are no error codes thrown on the control panel, but not sure there are error codes for this model - the manual doesn't mention any. So I have removed the side panel and can see the bottom pan is bone dry and I made sure the overflow drain switch was not bound and operates freely. Is there some type of reset button or other task I can perform to continue troubleshooting this problem? Repair


I have exactly the same problem. Turn on the machine and it just pumps and pumps, door controls do nothing. According to the technician who came and looked at it the problem is a bad control board. He ordered the part and we are waiting on it. ... Bosch Evolution 800 SHE58C05UC Stainless Steel Built-in Dishwasher

My Kitchenaid dishwasher model 30SXSS is 5 months old and the lights on the control panel are blinking. The panel on the outside of the door says "okay to add dishes". The d/w will not run. Help!


Sounds like the door latch could possibly be bad. If its 5 months old its still under warranty. Call the company for repair. ... Dishwashers

Our old Bosch aquatech dishwasher will not fill and says F on the display panel. I'm not sure of the model number; it's over 15 years old!


... Dishwashers

I have an 8 year-old Kenmore 665.16912 dishwasher. Worked fine until two days ago. Then it stopped working altogether: nothing lights up on the front panel. I have checked the 120 in the electrical box, the door switch is working, the thermal fuse is working and there is 120 volts at the white and black connections to the timer control board. I bought a new timer control board for $120 and that did not fix the problem. What else could be causing the unit to completely stop working?


If all are really good then the only thing it con be is the display (8269205) $25.00 part, if it's bad dishwasher wont run ... Kenmore 16912 Built-in Dishwasher

I have a kenmore dishwasher model #655.1374 or 655.1384 which is only about a year old. I am having a problem with the controls. It will not allow me to use smartwash. The only control that can be used is quick rinse. I reset it by pushing Sani rinse and heated dry. All the lights come on and it seems to do a test. But after that still the same thing except if I push start resume it goes to normal wash which stays on a long time and periodically the cancel drain light comes on as well as the 4


... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0877 seconds