Having problems with your Frigidaire 24 in. PLD3465REC Stainless Steel Built-in Dishwasher ?

The top spinner blade has fallen off, how do I reattach it? stainless dishwasher


Answers :

Repair Help & Product Troubleshooting for Frigidaire 24 in. PLD3465REC Stainless Steel Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The top spinner blade has fallen off, how do I reattach it? stainless dishwasher


... Frigidaire 24 in. PLD3465REC Stainless Steel Built-in Dishwasher

KitchenAid KUDPO1IL dishwasher has a buzzing noise during wash (and rinse?) cycles. Recently had to replace the top spinner (and connecting screw), as it had fallen off, but I think the noise was happpening before that. Today I re-clipped the flat pipe at middle back; one side had come loose. That might have helped a bit. Previously, I took out the bottom spinner and found a 1-2" string-like strip of gray nylon under that. I wanted to check a grinder, to see if something was trapped in that, but


... KitchenAid 24 in. KUDP01IL - Multiple Color Built-In Dishwasher

Whirlpool Gold Dishwasher - GU2700XTSB The top rack of the dishwasher is not cleaning. The bottom rack dishes clean fine. There are no clogs in either the bottom or top spinner arms, the plastic tube feeding water from the bottom pump to the top rack spinner arm is clean, the spinner arms all rotate freely and do not bind. Water pressure is correct and water temperature is correct. There are no lime or hardwater deposits or clogs. What could be the issue?


Hi,\012\012\012\012\012I\012have an older dishwasher also and recently my wife also complained\012about it not cleaning right... so me being the man I am tried in vain\012to clean the things... Bought new ... Whirlpool GU2700XTSB / GU2700XTSQ / GU2700XTST Built-in Dishwasher

Hi, we are trying to install our new Bosch dishwasher model: SMU68M05AU. I am surprised to see packing foam and flimsy edging across the top edge that meets up to the stainless steel door edge when its closed. I can not find detailed installation instructions. Is there not a strip that goes across the top to meet the door as the top looks very ugly? The dishwasher door protrudes from the under bench cupboard space so the top part is in view and exposed.


Thanks for your question!I'm sorry that you haven't received an answer yet.The response rate on FixYa FREE questions is usually over 80%, but sometimes questions go un-answered when:1. the question is unclear, incomplete, or poorly ... Bosch Dishwashers

Should knives/forks/spoons be loaded with blades, tines,bowls down or up in dishwasher? When ready to load knives/forks/spoons in the dishwasher, should you load the utensils with the handles at the top, or should the handles be at the bottom with the blades of knives, tines of forks, and eating portions of spoons be placed face down in the dishwasher? Simply put, should the handles of the utensils be placed up or or down when you load them in the dishwasher?


I find they come cleaner with the handles down, but if you have kids they come clean enough and are safer loaded with handles up, with spoons though, always load handles down so they can get the clean water to the whole spoon. ... Frigidaire FGHD2433KF Builtin Dishwasher

Installation upon installing 24"stainless electronic dishwasher, I don't see how & or any top tabs to attach to under counter top for stadiltion. most diswashers have tabs for wood screws to attach the top of dishwasher to. please advise. theres just thick plastic w/ grooves in it..


Some people put timber off cuts on the top panel to stop the dishwasher tilting forward ... LG 24 in. LD-12BS6 Stainless Steel Free-standing Dishwasher

Whirlpool dishwasher top spinner and top rack spinner is not putting out water or very little and not spinning. I have taken apart and cleaned everything including the sump / chopper, can't find any blockage in the tubes that deliver water from the pump to the spinners. Is the Pump or Motor done? how can that be it's less than 5 years old? Its a Whirlpool Quiet Partner I Model DU1055XTPQ3


First, confirm that the holes are not blocked on these arms. (I did not want to assume you have done this.)Then check the impeller on top of the motor stem for being loose or worn/damaged - to rule the impeller out. If it is fine, then ... Whirlpool 24 in. DU1055XTP Built-in Dishwasher

Bosch dishwasher shu3032uc-14 doesn't clean very well tried different things but no help sometimes i can catch top spinner not working all the holes are clean where is the water level supposed to be and how do you tell if top spinner is getting enough water pressure?


Pour a gallon of white vinegar in bottom run halfway thru wash cycle turn off let unit sit overnight to properly soak-then run a couple of times to rinse out vinegar(vinegar dissolves calcium which causes unit to not function properly) also check uni ... Dishwashers

GE dishwasher spinners in middle and bottom not spinning. Top spinner runs ok. Water drains from dishwasher ok. GE pushbottom questpower 2 model


Hi, Look at the spray arm and see if there is something pluggin the ports on the ends. If these are plugged, the spray arm will not rotate. Since the upper arm is ok, I think you wil find them plugged.\015\012Please let me know if this helps yo ... Dishwashers

Teka DW7 59 F1 dishwasher bottom spinner arm not spinning have replaced arm but made no difference top arm /top section of dishwasher working fine


... Dishwashers

Teka DW7 59 F1 dishwasher bottom spinner arm not spinning have replaced arm but made no difference top arm /top section of dishwasher working fine


... Dishwashers

Need to install a new top spinner on the roof of our dishwasher


The medium sized plastic piece slides into the spinner and you put it upto the manifold. you have to remove the manifold so that you can push the smaller piece of plastic through the top of the manifold into the medium sized piece which would be hold ... Dishwashers

Bosch dishwasher Model SHU43C02UC/17 consistently leaves film on glassware, leaves residue in the bottom of glasses in the back position of the top rack, and sometimes leaves gritty residue on dishes throughout the dishwasher. The stainless steel interior is also stained. I regularly clean the filter, use Jet Dry (the product that was included with the machine when I purchased it), and rinse the dishes before filling. The dishwasher has never cleaned dishes like the 17-year-old Kitchen


Although I previously posted with the same problem of a film on the dishes after cleaning, I did find a section in the owner's manual which solved my problem. Lift up the rinse aid cap on the inside door - the factory setting is on "4". The rinse a ... Bosch 24 in. SHU43 Built-in Dishwasher

We have a bosch she4am dishwasher and just recently the unit doesn't rinse all the soap out of the glasses of the top rack and also a film is being left on the dishes. i have checked the top spinner and it works fine, cleaned out the drain, only use recommended soap tablets and use jet dry. we recently put in new counter tops but i didn't move the unit itseld only the drain- would this have any effect?please help


Check the top of the cabinet after the unit has started to wash the water droplets is the key. if you see water droplets on the very top all over then the unit circulation pump is working. If that checks out then check the jet dry compartment. here ... Bosch SHE4AM06UC 24 in. Built-in Dishwasher

I have a Whirlpool DUL300XTLQ3 Queit Partner III. The cleaning blades stopped moving-started it-waited awhile-opened it-the blades were in the same position. Took the bottom blade+filter cover off. Then I held down the metal piece on the case and switched on the micro switch on the door to see it running with the door open. The water shot straight up about 4-5" that's it. This does not seem to be enough pressure for the water to get all the way up to the top spinner. Am I looking at a new pump


If there is not enough water, the dishes would not get cleaned. Thiscould be caused by a partially closed water shut-off valve (locatedunder the sink), or a faulty dishwasher water valve (located at thebottom of the dishwasher, behind the kick panel, ... Whirlpool Dishwashers

Top spinner arm of dishwasher keeps falling off


Did you solve this. we have the same problem. the piece that the arm is connected to is slightly broken. I don't want to pay for a service call. let me know what you did. ... Dishwashers

Bosch Dishwasher I have a stainless steel Bosch dishwasher, I made the "mistake" to try to see if I could fix the jammed handle from the door. Unfortunately, (did not realize the top panel comes off without opening the entire door). I removed the screws from the door frame (Inside panel), and the door springs/latched got loose. I would like to put it back together, but I dont have any diagrams on the door to make sure all parts are in place to put the door back together. I have been havin


Hi ED,\015\012\015\012It sounds like a real problem here. If the springs are still in one piece, my best guess is to to remove the springs from the door. Then attach the springs to the dishwasher body first, then reattach the spring to the door. Not ... Bosch 24 in. SGS43C12 Classixx Free-Standing Dishwasher

I bought a house with a Bosch dishwasher in it and soon found that the top spinner holes are blocked with bits of old labels. I have removed the spinner and separated the concentric tubes but I do not see how to push the debris back along to the inlet. Do I need a power but very small jet to put into the holes along the arm? Would drying it then putting the suction of a vacuum over the inlet hole be useful?


This is very common if the filters are not cleaned regulary if you remove the arms and soak them in hot soapy water for around half an hour this should loosen the debris also tap them on the side of the sink this will remove more stubborn debris ,ref ... Bosch Dishwashers

I have a Kenmore dishwasher model # 13572K my problem is that the water does not come to the to spinner therefore all glass on top rack never come clean. How can this problem be fixed, under the top track the sprayer arm does not seem to be working ?


... Dishwashers

Why does my dishwasher top spinner not spin - Bosch 24 in. SGS45E02 / SGS45E08 Exxcel Free-standing Dishwasher


... Bosch 24 in. SGS45E02 / SGS45E08 Exxcel Free-standing Dishwasher

Top spinner of dishwasher wont go round - Zanussi Dishwashers


Hi, \012I have an older dishwasher also and recently my wife alsocomplained about it not cleaning right... so me being the man I am tried invain to clean the things... Bought new spray arms online and installed them inminutes...now the thing works li ... Zanussi Dishwashers

I have a Kenmore Ultra Wash Dishwasher model 665.16379301. The spinner from the top of the dishwasher has come off. I have a replacement part but need to know what is required to replace it. Do I need to remove the feed tube assembly in order to replace it?


... Kenmore Dishwashers

The top water spinner in our dishwasher doesn't seem to be working - as the dishes on the top once the cycle is complete are not getting wet or washed! what should i do?


The problem may be that the pump is not supplying enough water pressure to get to the top arm.Here is a link to instructions on how to clean the pump. They may or may not work as I do not know what model you have. ... KitchenAid Dishwashers

I have a Whirlpool dishwasher that won't clean the top rack. The spinner for top rack is not spinning. I can't seem to get to the screen to see if there is a blockage.


I have a du1148xtpb1 whirlpool dishwasher and the top rake dishes are not getting clean please advise ... Whirlpool DU1055XTS Built-in Dishwasher

Eaton viking i have an old eaton viking dishwasher. model# DC392W149 the seal in the pump for diverting water to the top spinner bar is worn out. i cannot seem to find parts anywhere. should i try to find a new pump assembly or break down and buy a new dishwasher?


... Viking Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1574 seconds