Having problems with your Frigidaire 24" Tall Tub Built-In Dishwasher - Black ?

3 second lock light right next to the Rince only button is on and I can't change it no matter what other button I am pressing. The door shuts, but nothing happens.


Answers :

Repair Help & Product Troubleshooting for Frigidaire 24" Tall Tub Built-In Dishwasher - Black

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

3 second lock light right next to the Rince only button is on and I can't change it no matter what other button I am pressing. The door shuts, but nothing happens.


... Frigidaire 24" Tall Tub Built-In Dishwasher - Black

I just bought this house with this dishwasher built in. I have pushed the door shut, pressed the heat dry button to lock the door and pressed the start button. Nothing happens. Now I can't even get the lights on front to turn off. The lock button flashes as though the door is open, but its not as far as I can tell. I have to press the latch in to open the door. I'd like to use it... any ideas. Its a Kenmore Elite model # 665 17052 402. Thank You


... Kenmore 24 in. 17052 / 17054 / 17059 Built-in Dishwasher

My Maytag dishwasher (MDBH955AWS) will not turn on. You press the start button and nothing happens. It is getting electricity to the unit and the door is shut. I looked at the manual in the troubleshooting section and found nothing.


Your problem is probably the electronic control board directly behind the touchpad. Contact an appliance service company. ... Maytag MDBH955AWS Stainless Steel 24 in. Built-in Dishwasher

Hi there. I have a Matsui MF145 slimline dishwasher and having a problem. When I press the on/off button I would usually then press the program indicator button (usually the first indicator - pans) and close the door and the dishwasher would start. Currently i press the on/off button and try to press the program indicator button and the on/off button flashes and there is a continuos beeping sound....and nothing more happens. Do you know what the problem is?


Try to clean the unit, ofetn when the machine is dirty, some sensors are fooled thinking there's some problem. be sure there's no jam on mechanical parts. ... Dishwashers

I have a Haier ESD312. I filled the washer, closed the door and pressed the normal button. Nothing happened. I tried the other buttons, Nothing happened. Now I have a full dishwasher that does nothing. I could not find even a clue in the user manual.


... Haier ESD312 24 in. Built-in Dishwasher

I have a F&P dishwasher model DW60CDX1 (around 5 years old) which we cannot start a cycle. The dishwasher turns on (power button and all programme indicators light up) but when you press a programme button nothing happens - the lights don't change. We have switched the power off at the powerpoint and on again a few times but this has not rectified the problem. It was playing up before this in that sometimes the programme would not start when a button was pressed but I just closed the door mor


The micro switch in the door which senses the door closing has probably failled. This is accessible once the inner door cover is removed. Switch should be under $10 from electrical store. Or buy through appliance manufacturer. ... Fisher and Paykel Dishwashers

Zanussi zdt6053 in built dishwasher not starting. When pressing the control panel on/off button the 65 deg normal wash light comes on. When pressing the program selection button nothing happens. When closing the door the machine does not start up. Is there a fault in the control panel circuit board? Would water pressure prevent the machine from operating?


... Zanussi 23 in. ZDi6053SX Built-in Dishwasher

Won't start. Seemed to be working fine a day ago. Then in mid cycle I opened the door because I was on the phone and it was too noisy (normal noise). Now , I shut the door and press start and nothing happens. No lights on the instrument panel. Nothing. Thanks.


You may have simply tripped a breaker, but if not it may be this.This may be a faulty door switch. If you look into the door locking mechanism carefully, you can see a small plastic bulb located either to the right or left of the locking Jaw. S ... KitchenAid 24 in. KUDU02FR Built-in Dishwasher

Please help my wirlpool ikea diswasher was working well but suddenly it stopped!I have one of those DWF small ones and have the buttons on the inside top part of the door. when I press the start button nothing happens and when I close the door the alarm sound goes off!! can anyone help me please


Try dropping power to the unit for a minute and see if it will reset itself. if not, you have a logic board failure. that or a door switch. check the manual for an indication on the warning alarm.good luckmark ... Whirlpool GU2400XTP Built-in Dishwasher

Mod gsd6209g00ww ser gf607466a i open the door to the dishwasher and there is a buzzing noise that will not stop. i tried to press the buttons to stop it. and closed the door again tighly nothing happened, also i fipped the breaker on and off and nothing happend.. please help me the buzzing noise is freakin my dog and out and it is annoying . thank you very much Jan


... GE Dishwashers

Lights on Dishwasher light up but nothing happens. When I reset power it lights up the high temp and sanitize button light up and LED displays PF. After I open the door they stop flashing. the far left five buttons light up when I push them and a corresponding number displays on the LED screen. the only lights that do not come on are the Delay button and power button. Don't know if they are working or just don't light up. No matter what lights up the unit does not turn on....:( ? help can't fin


Pf is power failure\015\012 your loosing voltage to the unit \015\012it may just be the door switch or it could be in the control\015\012 try starting the unit but keep your hand on the unit pushing the door in place,, its not a g ... Electrolux 24 in. EDW5500DSS Stainless Steel Built-in Dishwasher

I have a bosch SHU8815UC dishwasher. It was already installed when i moved into my apartment - so I'm unsure of the age. The dishwasher isn't functioning. When I open the door, the "Clean" light and the PowerScrub button are red. When i close the door, the light go off but nothing happens. One time I closed the door, it started to rev up but would shut off and beep three times after about 1 min. No water comes out. Any ideas? Thanks! June


... Dishwashers

Hi, I have had a few issues with my ST663 machine. The current problem: the rinse cycle light keeps flashing and it doesn't start when you shut the door. I have tried holding down the right button but it beeps twice and nothing happens? Also tried holding both buttons down for a while and still no success. I got a new electrical board installed not that long ago so not very happy hoping it not a big issue. Do you have any other things that I could maybe do?


HiIf you have already tried to reset the unit by pressing the High Temp wash-heated dry button for 3-4 times in sequence then the problem is either with the door switch or the keypad itself that has gone bad and should be replaced. Hope t ... Dishwashers

Have a 4 year old Kenmore Dishwasher Model # 74382. No problems at all until last week I went to start it and it would not turn on. Lights on the control panel were on with exception to the start light. I opened and shut the door to make sure it clicked and pressed the start button again and nothing. I tapped around the panel with the side of my fist and pressed it again and it began working. Well today different story I went to start it and it did the same thing. I tapped all over front of the


The problem is more likely the door switch is failing or out of adjustment/loose. You will need to remove the door panel. This is easy to do. There is a video at ... Kenmore 24 in. 74382 / 74384 / 74389 Built-in Dishwasher

My 5 yr old maytag d/w: When door is shut, all the lights on the panel flash. Nothing happens when any of the buttons are pushed. Is there a reset button?


You have to check the user guide for resetting. There will be set of keys to be pressed and set. It varies from manufacturer to manufacturer.Your local service provider can help you. ... Maytag Dishwashers

I have a 1 year old maytag dishwasher and it has the touch buttons on top of the door . When you touch the buttons to turn it on, nothing happens. It will light up the type of wash you want e.g. heavy,light...., but it won't start when pressed. It will cancel when pushed, but can't get it to start. HELP!!!


... Maytag Dishwashers

KUDS02SRSRSS1 dishwasher.......remodeling kitchen, disconnected dishwasher.....reconnected and have power (lights are working), however when hit start or cancel button on front door, nothing happens. Is there a "reset sequence" of buttons that I need to press?


I am assuming you have tried to turn the power off and on again after a delay.\015\012\015\012Most likely the door switch is not engaging. Have you tried to push the door a bit hard. Sometimes the dishwasher is not aligned correctly with ... KitchenAid 24 in. KUDS02SRSS Stainless Steel Built-in Dishwasher

The Dishwasher PLD2850RDC2 will not start. The CL flashes, the type of cycle pressed on the key pad does respond, but nothing happens when START is pressed. Steps taken: -Door is clicked shut -Power breaker has been turned off and back on -All dishwasher moving parts have been moved by hand to ensure no obstructions are in the way. Best guess is the key pad is just non responsive. I hope there is an easy solution. Thank you.


... Frigidaire 24 in. PLD2850 Built-in Dishwasher

The dishwasher won't start, its stuck, pots/pan button is blinking, & the timer has (2)_ _ bars blinking. I tried to reset/pushed the start/resume button nothing happened. I pushed the cancel/drain button still nothing happened. I close the door tight..nothing. I check the trays if there something stuck inside..nothing. I unplug/replug the power cord nothing? my wife was using it when this got stuck about 3 weeks ago.


Did you hold the start/resume button for at least 3 seconds if this works the dishwasher will start ok but if there is a fault it will fail again best you contact your nearest service agent good luck ... Whirlpool GU2400XTP Built-in Dishwasher

After we press the wash cycle buttons on our Fridgidaire 4300 series the LEDs come on. We close the door and the remaining time displays, but then nothing happens and the display goes out after a few seconds. Any suggestions?


Sounds like you didnt press the start button or its not connecting. With our unit you have to press it quite hard. ... Frigidaire Dishwashers

Bosch SHX33A: lights come on properly in response to buttons, it has power. Close door, it makes the normal startup sounds, then water flows in. Normally, at this point washer starts into normal cycle. Instead, it just sits there and nothing happens. Forever. Not a matter of patience: we've left it in that state all night long. Have flipped power circuit and started over, everything else I can think of to kick-start it, no change.


Hi\015\012\015\012The issue seems to be with the motor or the door latch\015\012assembly going bad and should be replaced. The washer won't start the cycle if\015\012motor is not working, as its filling with water so I believe that the do ... Bosch 24 in. SHX33A02 / SHX33A06 Free-standing Dishwasher

The power is going to the dishwasher. The on off buttons work. No error codes. The salt light is lite (has been for 5 years) but now I get zero response when shutting the door (after selecting any of the 6 run options). There is no noise, no water, nothing happens. How do I repair this dishwasher so that it will run again?


Door switch failure. This will shut down all other start options. Inspect and possible replacement. See if you can activate it with something with door open. Give it a good close look... ... Dishwashers

Kenwood Elite Dishwasher Mod#665.13779 K600 "Normal Wash " light blinks continuously with NO washer action. No other wash modes light up when pressed. Washer does not do anything. However, a couple of times I got it to make a noise as if it was draining, but then nothing happens. Push "Cancel" and it blinks in unison with Normal Wash light. Open door and close it, "Cancel" light goes out and Normal Wash light continues to blink. Have tried various combination of buttons to try to "Reset"


... Kenmore Dishwashers

The program indicator light is on constant, but will not change programs when pressing the program selection button. And when you close the door to start the cycle nothing happens


Hi\015\012 \015\012Please check the link regarding your query…\015\012http://www.rep ... Dishwashers

Door won't latch shut - no buttons respond except "delay start" and nothing happens except "wash" light going on.


Without knowing exact model, I suspect you need a new latch or striker. The machine should not operate untill the door is secure. ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0988 seconds